asterisk users - Aug 2005 - E&M to E&M Dialing - TE410P

I have a TE410P with two real Telco T1's and the other 2 ports terminate
into an in-house voice mail/IVR system.  Calls arrive from Telco are routed to
the appropriate in-house system based on the DID Digits.  This part works
perfectly.

Now I what to allow the in-house VMS to dial though asterisk to the Telco
T1's.  The VMS complains there is no dial tone on its T1 and drops the
attempt.  I could disable dial tone detection, but rather not.  Instead, I would
like asterisk to provide a dial tone after the trunk has been seized.

These T1's are all the same - D4, AMI, SF E&M Wink Start.

Any Ideas?

Bart
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20050810/52a7043d/attachment.htm

Bart Fisher wrote:
> Now I what to allow the in-house VMS to dial though asterisk to the Telco
T1's.  The VMS complains there is no dial tone on its T1 and drops the
attempt.  I could disable dial tone detection, but rather not.  Instead, I would
like asterisk to provide a dial tone after the trunk has been seized.
E&M trunks do not typically provide dialtone, since they are trunking 
connections, not station connections.