search for: dialing

I am making some changes to the dial plan at the request of the company president and have run into some problems. I have a couple of layers of menu's and I am not sure how to handle them. Here is how it should work (sorry for the crappy diagram) main menu --------Dial 1 for support | Dial 2 for special | Dial 3 sales

Hello ! I am experiencing some problems with Asterisk trunking, this is the scenario: There are 3 servers, a DID server provider (VOIP provider) which delegates us a bunch of DID numbers to our asterisk server number one (I will call it AA), from which I route the calls to Asterisk server number 2 (I will call it BB), which then terminate on phone handsets. The trouble is, that I probably

...couldn't restart/reload asterisk from the CLI. I have to kill the asterisk process and run safe_asterisk again. any ideas? asterisk*CLI> show channels Channel (Context Extension Pri ) State Appl. Data Zap/31-1 (default 9388 1 ) Dialing AppDial (Outgoing Line) SIP/1024-1330 (network 968290897 2 ) Ring Dial Zap/g2/68290897 Zap/30-1 (default s 1 ) Dialing AppDial (Outgoing Line) SIP/1004-bca1 (network 993841544 2 ) Ring Dial Zap/g2/93841544...

Guys I am having some serious issues with my call queue and Management is breathing down my neck pretty bad, and I am running out of ideas. I have a single queue for my tech support department. I originally was using the AgentCallbackLogin for them and it tested out great on our testing weekends, but it hasn't worked out since. It would only let one of them take calls at a time, no matter

...to dial off premises, so I gave all my local phones three digit extensions with this format: 1[1,0]*. My thought is that there are no area codes that start with 0 or 1, so if I use those numbers, I can create 20 local extensions that can be dialed with 3 digits, and not have to use a timeout when dialing long distance. If I dial 1, then anything other than 0 or 1, Asterisk knows I am dialing long distance. If I start with any number other than 1, Asterisk knows I am dialing a local or local toll call. This has worked fine for me (as far as I know). Is there some flaw I am not seeing? I see a l...

I want to do something like: exten => _NXXXNxxxxxx,1,Dial(${BABY}/${EXTEN}) exten => _Nxxxxxx,1,Dial(${BABY}/${EXTEN}) exten => _1NXXNxxxxxx,1,Dial(${BABY}/${EXTEN}) exten => _011.,1,Dial(Dial({TOLL}/${EXTEN}) exten => _9NXXXNxxxxxx,1,Dial(${BABY}/${EXTEN}) exten => _9Nxxxxxx,1,Dial(${BABY}/${EXTEN}) exten => _91NXXNxxxxxx,1,Dial(${BABY}/${EXTEN}) exten =>

I'm writing an AGI script and want it to dial a number on a channel connected to the PSTN. It would look something like this (pseudo-code follows): if ($a){ dial("8005551212"); }else{ dial("8665550000"); } The part I can't seem to get right is the "dial" function. I tried to mimic the dial plan like so sub dial($number){ print

Hello, I have few questions about Asterisk. I installed Asterisk from CVS on FreeBSD and I made cvsup 2 days ago. 1.I couldn't find Asterisk version using "asterisk -V" command. How can I to find version information? 2.I am using Wildcard X101P (FXO) and Wildcard TDM400P REV E/F (FXS)on it. I tried Asterisk CallerID feature, but unable to get it. I tried callerid signaling V23,

...an outside call through the hardware pbx, our fxo interface is also connected</FONT></DIV> <DIV><FONT face=Arial size=2>to one of the extensions of it. we can make calls to internal hardware pbx extensions </FONT></DIV> <DIV><FONT face=Arial size=2>by dialing through the fxo interface using Dial function, for ex. Dial(Zap/g3/599|20|t) </FONT></DIV> <DIV><FONT face=Arial size=2></FONT>&nbsp;</DIV> <DIV><FONT face=Arial size=2>but we also want make calls to outside by first dialing 9, and then dialing th...

I have an interesting dilemma with sequencing in the dialplan. Up to now, I have assumed that the extensions in the dial plan were tested in the order that they appear in extensions.conf. In other words, I have the following fragment which was designed to dial toll free on the PSTN and all other long distance on VoIP: [longdistance] include => local

Hello, I have few questions about Asterisk. I installed Asterisk from CVS on FreeBSD and I made cvsup 2 days ago. 1.I couldn't find Asterisk version using "asterisk -V" command. How can I to find version information? 2.I am using Wildcard X101P (FXO) and Wildcard TDM400P REV E/F (FXS)on it. I tried Asterisk CallerID feature, but unable to get it. I tried callerid signaling V23,

I posted earlier in the day about needed help with IAX trunking. I did some more reading and made some more changes. Here is what I have thus far: Iax.conf on one server [general] bindport = 4569 bindaddr = 0.0.0.0 disallow=all allow=ulaw allow=alaw allow=gsm mailboxdetail=yes [vvfarm] type=friend username=colo secret=testpassword auth=plaintext host=64.194.211.170 context=iax-incoming

TRUNKMSD1=1 ; MSD digits to strip (usually 1 or 0) TRUNKMSD2=2 ; MSD digits to strip (usually 1 or 0) ; logn distance calls exten => _91NXXNXXXXXX,1,NoOp("Dialing: "${TRUNK}/${EXTEN:${TRUNKMSD1}}) exten => _91NXXNXXXXXX,2,Dial(${TRUNK}/${EXTEN:${TRUNKMSD1}}) exten => _91NXXNXXXXXX,3,Congestion When I dial a long distance number (916503270309 for example) I get the message (I think from SBC) saying I must first dial a 1. Other times, it works, l...

Anybody ever run into a case where the Sipura Dial Plan will not work with the S0 option to immediately connect? My Dial plan reads (*xx|[3469]11S0|0|00|[2-9]xxxxxxS0|1xxx[2-9]xxxxxxS0) and I can dial ONLY then numbers in the dial plan so I know that it works. For some reason when I dial 5551212 1212121212 It does not dial for a while and then it dials 555 1212 Anyone have any ideas?

hi any one tell me how to make a dialplan my extensions.conf exten => _40XXXXXXXXXXXX,1,Dial(OH323/${EXTEN}) i want to dial to 40XXXXXXXXXXXX number. XXXXXXXXXXXX could be any number like 923335224005 or 92512213248 at the moment when i am trying to dial 40923335224005 asterisk is dialing Executing Dial("OH323/R11429", "OH323/40923335224005") but i want him to dial Executing Dial("OH323/R11429", "OH323/923335224005") Kamran Ahmad __________________________________ Do you Yahoo!? Yahoo! Mail - Find what you need with new enhanced sear...

HI, I'm using netmeeting to connect to an asterisk server and dial out. my extension looks like this exten => s,1,Dial,Zap/1/ Unfortunatelly the number that I have dialed in Netmeeting is lost ;-( If I hardcode the number on the line above, like ... exten => s,1,Dial,Zap/1/6642794 ... everything works fine What am I missing?

Asterisk 14.1 Here's a bit of test dialplan, which works as expected and simulates exactly what I'm doing at the top of my large dialplan... [dial-pre-test] exten => s,1,NoOp() same => n,Set(LIMIT_PLAYAUDIO_CALLER=yes) same => n,Set(LIMIT_WARNING_FILE=time_limit_reached) same => n,Dial(Local/s at dial-test,3,L(3540000:60000)) same => n,Hangup() [dial-test]

...One suggestion... those 8 lines are redundant. The first 4 let you dial out without the 9 in front, and the last 4 need you to dial 9 to get out. You should probably decide which way you want to do it, and use only 4 of the lines instead of 8. Keep it simple. Also, if you don't use 7-digit dialing in your area, you can drop the second line (_Nxxxxxx) and only have 3. Mind you, even if your local area supports 7-digit dialing, I'm guessing babytel doesn't, so it wouldn't even work like that. You would have to add your area code (or 1 and your area code) after the slash between...

Dear Asterisk-Users, does anyone know how to prevent non-free calls to Broadvoice Unlimited World ? This first thing I did is I accept only that coutry prefixes (in extensions.conf) that are in the Unlimited World dialplan. I was also able to filter out german cell phones (cause they begin with 1 and no landline is beginning with 1). US is also no problem as cell phone calls are unlimited

....I THINK. When dialing 1+10 digits, I occasionally get a telco message "You must first dial a 1....". When I look at the console, the number is being sent to the ZAP channel properly. We're talking about a couple of POTS lines on a TDM400P. I'm thinking that it may be starting the dial too early afte...