The SC420 does not support APIC (at least not with current BIOS). The
Digium TDM400B card seems to always seek the same IRQ so it locks one down.
The clone X100P cards often get a shared IRQ, even if vacant ones are
available. I've found both the Digium card and the clones very frustrating
with this system. Thus the reason Digium does not recommend it. I've gone
to a mostly SIP configuration using Sipura SPA 3000's.
For analog stations, I got an Efficient Networks SB510 (H323 protocol) on
EBay but it doesn't work very well. Caller ID is incomplete between it and
the Asterisk for inbound and outbound calls. (No caller-id time transmitted
to phone, only number sent and a default "SB510" for the name on each
port.
Inbound calls from the Asterisk to the SB510 just say "Asterisk" and
the
extension number. This unit also does not support caller-id/calls-waiting,
switchook flash or many POTS like features you'd want. The SPA2000 and
SPA3000 seem to work better than anything else.
------------------------------
Message: 12
Date: Mon, 1 Aug 2005 21:13:30 -0500
From: "Anton Krall" <akrall-lists@intruder.com.mx>
Subject: RE: [Asterisk-Users] Re: Asterisk-Users Digest, Vol 12, Issue
171
To: "'Asterisk Users Mailing List - Non-Commercial
Discussion'"
<asterisk-users@lists.digium.com>
Message-ID: <20050802021816.8D1795B40F6@intruder.com.mx>
Content-Type: text/plain; charset="us-ascii"
If the SC420 is sharing interrupts, can you go around that by chaning slots
or maybe, I don't know if it can do APIC? Or how about disabled the shared
devie like USB?
|-----Original Message-----
|From: asterisk-users-bounces@lists.digium.com
|[mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of
|Joe McConnaughey
|Sent: Lunes, 25 de Julio de 2005 12:48 p.m.
|To: asterisk-users@lists.digium.com
|Subject: [Asterisk-Users] Re: Asterisk-Users Digest, Vol 12, Issue 171
|
|The cheap ones on EBay won't work with the SC420 server. I
|have one and can't make any of the clones work. I do have one
|TDM40B card for analog stations that works well. The problem
|with the SC420 is that it won't let you set the interrupts
|yourself and you end up with interrupts being shared.
|
