Displaying 20 results from an estimated 21 matches for "tdm400b".
Did you mean:
tdm400p
2007 Jul 31
1
Problems using TE412P and TDM400B in a IBM x3650
Another day, another apparant unexplained hardware incompatibility.
I have a TE412P and a TDM400B living quite happily in a whitebox using an
Intel motherboard:
http://www.intel.com/design/servers/boards/se7230nh1-e/index.htm
I tried to move to an IBM x3650 system. It uses a slightly newer chipset,
but apparantly it's in the same family. The SE-7230 board has been EOL'd
and the sugg...
2005 Jan 10
0
dead line (no LED) on a TDM400B?
I moved my TDM400B cards (first two cards are 40's, third is a 31, last
is an 04) from one computer to another, copied all the config files, and
now the LED on the line 11 - third line of the third card doesn't go on
(it used to on the previous computer). I can get by telling * not to
use this line for n...
2004 Oct 04
2
fxsmod cable length limit
Is there a cable length limit to use with a fxsmod (TDM400B) ?
I noticed that if I use a very long cable 148 feet, I can hear some
parasite : I hear the radio ! If I use a short cable, there is no
problem...
Thanks for help,
St?phane HENRY
2003 Jul 27
3
Australian Options
...because the
single port would need to connect to a channel bank which in turn would
connect to the telco plus extensions, therefore we are back to the same
situation as with analog lines above.
So, really, are there any decent solutions for asterisk use in Australia?
PS, currently I am using the TDM400B plus Traverse Netjet ISDN with I4L, but
this doesn't seem suitable quality for re-sale.
Regards,
Adam
2007 Dec 11
4
X100P Fxo card headaches
...ver (web / db / music server etc), and i would like to run my PSTN
line from Kingston Comms, but i can't get this box the recoginsie this
line!
The X100p is a cheap clone i got off ebay for a tenner, so im not
expecting much, i know they have echo issues, but im going to upgrade
to a SPA3012 / TDM400B when i have the cash.
Ztcfg -vv reports
orange:~# ztcfg -vv
Zaptel Version: SVN-branch-1.4-r3374
Echo Canceller: MG2
Configuration
======================
Channel map:
Channel 01: FXS Kewlstart (Default) (Slaves: 01)
1 channels to configure.
orange:~#
and my zaptel.conf file contains
oran...
2005 Sep 28
0
call wating and call transfer
...zapata.conf because customers want to
speak to the operator in person, not leave her a voicemail, when she's
busy with another caller. But now she can't transfer either of the
calls (which she can do when there's only a single call).
The operator has an analog phone connected to a TDM400B FXS line. The
calls are coming from PSTN lines connected to FXO lines on the TDM400B.
I searched the wiki and the list archives, found a message from this
January,
http://lists.digium.com/pipermail/asterisk-users/2005-January/082367.html,
about the same issue, saying
>you can try using #...
2005 Oct 04
1
TDM versions question
I have just realized while trying to research asterisk not acking
incoming calls
that the tdm400b card is stamped rev H, but when I issue the zap show status
command in the manager interface, it indicates Wildcard TDM400P REV E/F
Board 1
Which do I believe??
--
Best Regards
Greg Cirino
Spam and Virus Free Email
included with every email account
Cirelle Enterprises Inc.
25 Indian Rock Rd...
2007 Aug 10
1
Hardware Platform Recommendations for Digium Card Compatability
Hi there,
Could everyone that has a working production Asterisk server that uses a
Digium telephony card as a BRI/PRI gateway let me know what
motherboard/processor your server uses?
We use a Digium TE210P as our telephony card. We have tried a couple
motherboards, and neither is giving us satisfactory zttest scores.
The machine we have in production right now is a Biostar U8668-D (VIA
2005 Jul 11
1
Snom 360 NOTIFY syntax
I'm rolling out an installation with snom 360s in the near future.
Simple SOHO configuration, 3 FXOs hanging off a TDM400B, 4 snom 360s, a
snom 200, some variant of IAX softphone, and an IAXy or Sipura 2002. I
have the 360's set up to subscribe and notify for the line use lights,
which works like a charm for interoffice calling (between the 360's,
anyway. The IAXy, 200 and, softphone will be used by less...
2005 Jan 13
1
MWI on Zap analog phone not lighting
We are using Bellsouth 8867 phones on our TDM400B FXS lines
(asterisk-1.0.3). It has a "Voicemail" light, which appears to be MWI
(according to the manual it works with voicemail from the telco that
sends a FSK signal). The dialtone stutters when a line has voicemail, so
I know that I have the mailbox setting right in zapata.conf, bu...
2003 Jun 05
1
T100P + Capi + Caller ID issue
...but via an analog line
on the channel bank, the caller id is display correctly!
(the zhone doesn't pass CID, but my agi script detects that
and set cid to "UNKNOWN" <0> ).
Of course, CID between local extension (through the zhone)
is ok....
So I've done a test : I added a TDM400B to my setup and
connected 4 pots to it... et voil?, CID now works ok
on these phones (even if the call is coming from the CAPI side).
So any idea on that???
All the cards doesn't share any irq, the system is a debian 3.0r1
with kernel 2.4.20 , P4 2.4 Ghz and 512 Mb Ram.
seems that there'...
2005 Aug 13
3
One more newbie question
Ok, I am going for A@H with the CentOS iso disk. Installed and just
checking a few things out.
My other question is this, which I forgot to ask before. We have no
Broadband here and more than likely will never have, so I am just
looking at building Asterisk to handle inbound and outbound calls, at
home via a ISDN card and for my hotel job via a PSTN line setup. Is this
very complicated to setup
2005 Aug 02
0
Dell SC420 and Interrupts
The SC420 does not support APIC (at least not with current BIOS). The
Digium TDM400B card seems to always seek the same IRQ so it locks one down.
The clone X100P cards often get a shared IRQ, even if vacant ones are
available. I've found both the Digium card and the clones very frustrating
with this system. Thus the reason Digium does not recommend it. I've gone
to a...
2005 Sep 09
0
Doesn't finishes callerid spill
Hi,
I am a beginner in asterisk. Implementing it in my dept in India
using TDM400b card with asterisk, zaptel, libpri version latest of CVS
HEAD
Callerid on my system is coming tough.
Asterisk doesnot finishes the callerid spill and Cancells it.
After going through code in Callerid.c and chan_zap.c I found that my
line is providing caller id of length 8867.
Flow enters in zt_c...
2006 Jan 19
0
DTMF not recognized on overseas call from cellphone
We have PSTN lines connected to FXO lines of a TDM400B. I just got a
complaint that overseas callers who are using cellphones sometimes find
that DTMF digits aren't working - they press digits and the menu goes on
as if they hadn't pressed anything. Since it sometimes works, and other
IVRs work over the same cellphones, it's not that...
2007 Jun 26
0
TE412 / HPDL380G5 / * 1.4 / CentOS 4.5 Experience
Has anyone successfully run * 1.4 with the following configuration (or
something very similar)?
HP DL380 G5 (3Ghz Xeon)
CentOS 4.5 (kernel 2.6.9-55)
Asterisk 1.4.5 (or 1.4.4)
Zaptel 1.4.3 (or 1.4.2.1)
TE412P
TDM400B (2x FXO and 2x FXS modules)
I've had this rig running * 1.2.18 with Zaptel 1.2.17.1 for several months
without any issues. Upon trying to upgrade to * 1.4.4 and Zaptel 1.4.2.1 a
few weeks ago, I saw several kernel panics, easily reproduceable with a load
test suite that bridged calls from the...
2005 May 20
1
MFC&R2 Venezuela with libunicall
...Wildcard TE110P T1/E1 and libunicall latest code.
All libs compiled successfully and the E1 have a green light!
I am able to receive a call (or at least) testcall shows some information when an incoming call is received so the drivers and basic configuration is working.
My * box has 2 cards, one TDM400B (2 fxs and 2 fxo) and one TE110P E1/T1. I have loaded in the followin order the kernel modules:
1. zaptel
2. wcte11xp
3. wcfxs
The E1 is configured as this: the first 15 channels are for incoming calls using MFC/R2 Venezuela protocol, the last 15 channels are configured as a normal analog line,...
2005 Aug 18
2
Re:How many TDM22P Card can be used on thesame PC ?
>>You say that each card generates an interrupt in every 1ms.
>>So for 6 cards, each card needs to be processed atleast in
>>166usec(1ms/6) in their interrupt_routine. Is it teoritically impossible on a
>>perfect configuration/system?
>In theory there isn't much difference between theory and practice. In
>practice, there is.
>In other words: you're
2008 Feb 15
1
DialPlan help with Analog Fax Machine
I'm struggling to get my dialplan to work with a simple analog fax
machine.
I have TDM400B zaptel card with an FXO and FXS port. I have the FXO
port connected to the POTS machine and the FAX machine connected to the
FXS port.
The FAX machine itself works fine, I can FAX outgoing messages fine. I
can also dial the FAX extension from the internal context, the FAX
machine answers and...
2006 Jan 25
10
Asterisk 1.2.3 Released - Critical Update
Asterisk 1.2.3 has been released and contains a number of bug fixes. One
of the fixes is for a critical bug introduced in version 1.2.2 that will
cause an Asterisk server to stop processing calls correctly when the
server's clock reaches January 25th, 2006 (today). It is vital to
upgrade all 1.2.2 servers with this release as soon as possible.
Thank you for your support for Asterisk!