similar to: Dell SC420 and Interrupts

jglucky@blueware.net wrote: > Has anyone attempted or have had any issues getting Asterisk and > Digium cards working on a Dell SC420 server? I have it up and running on 2 SC420's with TE110P cards. Haven't had any problems as of yet (knock on wood). Dell SC420 TE110P 2x40 GB SATA drive in a RAID 1 setup (Linux 2.6 kernel needed for SATA drives; turn off RAID detection in BIOS).

Thanks! So aside from the lack of redundancy, will it perform well and scale to utilize a full T1's worth of calls through to the legacy PBX? We would probably build a backup server from old equipment and rsync the configuration files. Thanks again! > -----Original Message----- > From: William Boehlke [mailto:william.boehlke@signate.com] > Sent: Friday, May 20, 2005 3:33 PM >

The cheap ones on EBay won't work with the SC420 server. I have one and can't make any of the clones work. I do have one TDM40B card for analog stations that works well. The problem with the SC420 is that it won't let you set the interrupts yourself and you end up with interrupts being shared. =============================================================== Message: 26 Date:

We're using an SC420 and using BRI with a quadbri Junganns card, with IAX softphones and one hardphone. Working well except that we sometimes get dropped connections between IAX and the server with a max retries exceed message, which comes from the chan_iax driver code. The BRI side of things looks like it is fine. I had been thinking it might be a network issue but now wonder if it is an

Hi, I am attempting to connect my dell SC420 to a 32" LCD at 1366x768. I have attached my currect config file and currect X start log. How do I massage the xorf file to run at the native resolution of the LCD? It currently runs but is in a virtual mode. The screen scrolls. Any help is appreciated. I am using Centos 4.1. Jerry -------------- next part -------------- An embedded and

I was wondering how the Dell SC420 will perform under normal office to office communications. We would equip each server with a T1 card to make office to office SIP calls. They will integrate into our existing PBX systems. Does anyone on this list use this hardware currently???? Thanks!

Thank you Melissa. I love the phone but the dial keypad is a little bouncy. I was hoping for a more solid feel like on the analog PT390's or my quality standard, the Nortel 9417CW. Other than the MWI problem, I'd like more documentation on the configuration paramters. I have found little online configuration documentation other than very basic stuff on the Sayson website. I'd

Hi people I am new to Xen and having some trouble getting it up and running. I am trying to install it on a Dell Poweredge SC420 that has CentOS (RHEL3 clone) installed. The error that I am getting when I first try to boot into the Xen kernel, after having installed the binary and adding the necessary lines to grub.conf is : ---snip--- md: Autodetecting RAID arrays md: autorun ... md: ...

MessageMelissa - I added the "fromuser=AnyName" to my sip.conf file stations and that, in fact, corrected the problem. The MWI now works flawlessly. I would recommend that Aastra/Sayson pursue this with the Asterisk team so that it is listed as a known issue or to have Asterisk patched to fix it. I will submit a bug on it as well. I'm copying the Users Mailing List on this. For

Hi, I have a Dell Poweredge SC420 and a SC430. The SC420 has an ICH6 chipset and works ok with Xen. The SC430 has an ICH7 chipset and the SATA detection fails. I''ve tried 2.6.11.10 and 2.6.12.5 kernels, with Xen 2.0.7, Xen-testing and Xen-unstable, all with the same results. I''m using the same hypervisor and kernel binaries, so problems with the compiler environment etc. have

Guys, Im looking for a good text file editor for asterisk config files that can be embedded on a web page for online editing (on an interface), any recommendations? ________________________________________________________________ Anton Krall Direccion General Intruder Consulting A Division of IntruderEnterprises S.A. de C.V. www.Intruder.com.mx www.IntruderStore.com.mx Tel. 3872-2200 ext. 201

I am trying to hook up linux to an LCD 1333x768 LCD TV. XP in 1024x768 show up just fine. X does not. I have set the screen preferences to 1024x768. I have edited the xorf.conf file instead of have a range from 50 - 70 I change it to be only 60. I start X and it still comes up on my A70F monitor but still will not show on my LCD TV. xvidtune does not run on this PC. It says something about

Another day, another apparant unexplained hardware incompatibility. I have a TE412P and a TDM400B living quite happily in a whitebox using an Intel motherboard: http://www.intel.com/design/servers/boards/se7230nh1-e/index.htm I tried to move to an IBM x3650 system. It uses a slightly newer chipset, but apparantly it's in the same family. The SE-7230 board has been EOL'd and the

I have a really baffling problem. A couple of months ago I purchased a pair of GrandStream GSX-2000 phones for use with Asterisk. At first all was well. But recently I've noticed terrible sound quality problems. Basically the sound will "glitch" or stutter randomly from time to time. Now, what is interesting is that this happens even with the phone totally disconnected from any

Are there any easy to use snmp(mainly temperature monitoring) tools around for Centos -4? This is on a Dell sc420 server. -- Computer House Calls, Networks, Security, Web Design: http://www.emmanuelcomputerconsulting.com What businesses are in Brunswick, Maryland? Check Brunswick First! http://www.checkbrunswickfirst.com My "Foundation" verse: Isa 54:17 No weapon that is formed

I am new to VOIP, Linux and Asterisk. Through a lot of reading (this list, voip-info.org, documentation, etc.), I successfully installed FC3 and * on a new Dell SC420 with two X100P connecting to two PSTN lines at my office. I've also installed AMP to help me configure IVRs, call groups, extensions, etc. I use a Handytone-286 ATA and x-lite clients on the internal network and all works

Guys. What does this error mean? -- Playing '/var/spool/asterisk/voicemail/intruder/201/unavail' (language 'sp') -- Playing 'vm-intro' (language 'sp') -- Playing 'beep' (language 'sp') -- Recording the message -- x=0, open writing: /var/spool/asterisk/voicemail/intruder/201/INBOX/msg0000 format: wav, 0x812b4f0 -- User ended

I have an account with a IAX service provider that I'm happy with but recently I started getting rather strange reports from users. They're saying that occasionally, they'll be on a call via the provider and the outbound audio appears to slowly fade out to nothing with a bit of static during the fade. Does this ring any bells with someone? I'm going to update * on the server

Hi, I'm currently using a beronet quadBRI and a Digium tdm400P card on a Poweredge SC420 DELL with mandriva 2005 LE (standard installation) but this particular configuration gives me a problem: sometime the 2 cards work well toghether, sometimes it is impossible to make/receive calls. Is there anybody out there who is currently using this configuration without problems? TIA Giorgio

hi all, how to set the caller id facility for the TDM400p card. Please help me thanks, sandeep.s ----- Original Message ----- From: <asterisk-users-request at lists.digium.com> To: <asterisk-users at lists.digium.com> Sent: Tuesday, January 15, 2008 3:09 PM Subject: asterisk-users Digest, Vol 42, Issue 51 > Send asterisk-users mailing list submissions to > asterisk-users at