search for: rdsi

...et up an E1 in Brazil which could help somebody. In Brazil is very common telcos to have just R2 digital as their primary signaling. As I were trying to set up an E100P, which does not support R2 yet, I had to test an other signaling which works perfectly with Asterisk. They call this signaling as RDSI, using ccs as framing and PA (primary access) as coding. This RDSI are 30 channels completely digital which uses 128k per channel (2Mb). The zaptel.conf and zapata.conf to work with this are: # Zaptel span=1,1,0,ccs,hdb3,crc4 bchan=1-15 dchan=16 bchan=17-31 loadzone=fr defaultzone=fr # Zapata sw...

Hi. I'm getting new lines for using with Asterisk. In my Telco they said I could choose between Analogic lines and RDSI lines... I've already bought a TDM400P with FXO modules. Can you give some hints on the differences between RDSI and normal Analogic lines? Would I have problems for using a RDSI line with the TDM? Any other issue in general? Thanks in advance, RODOLFO --- avast! Antivirus: Outbound mess...

...d=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes canpark=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes rxgain=0.0 txgain=0.0 busydetect=yes busycount=yes busypattern=500,500 answeronpolarityswitch=yes hanguponpolarityswitch=yes ;PRI RDSI - SPAN 1 group = 1 context = incoming-1 inmediate=no switchtype=euroisdn signalling=pri_cpe channel => 1-15,17-31 ;PRI RDSI - SPAN 2 group = 1 context = incoming-2 inmediate=no switchtype=euroisdn signalling=pri_cpe channel => 32-46,48-62 ............... Thanks in advance, Elder Arohuanca...

...?t know how to call them. My capi.conf is as follow, [general] nationalprefix=0 internationalprefix=00 rxgain=0.8 txgain=0.8 [interfaces] ;#########config de la primera interface CAPI##########333 msn=916733232 incomingmsn=* controller=1 softdtmf=1 accountcode= context=salientes-rdsi ;echosquelch=1 ;echocancel=yes ;echotail=64 ;callgroup=1 ;deflect=12345678 devices=2 ;###############Config de la segunda interface CAPI################33 msn=916733232 incomingmsn=* controller=2 softdtmf=1 accountcode= context=salientes-rdsi ;echosquelch=1 ;echocancel=yes ;echota...

...=no #defaultzone=us loadzone=nl defaultzone=nl # qozap span definitions # most of the values should be bogus because we are not really zaptel span=1,1,3,ccs,ami span=2,0,3,ccs,ami span=3,0,3,ccs,ami span=4,0,3,ccs,ami bchan=1,2,4,5,7,8,10,11 dchan=3,6,9,12 fxoks=13-16 ------ zapata.conf context=RDSI group = 1 ; S/T port 1 channel => 1-2 ; S/T port 2 channel => 4-5 ; S/T port 3 channel => 7-8 ; S/T port 4 channel => 10-11 switchtype =fxo_ks context=EXTENSIONES group = 2 channel =>13-16 ------ extensions.conf [RDSI] exten => _X.,1,Dial(ZAP/g2/${EXTEN},60) exten => _X.,...

...2p TE mode (for connecting ISDN lines in point-to-point mode) signalling = bri_cpe ; p2mp NT mode (for connecting ISDN phones in point-to-multipoint mode) ;signalling = bri_net_ptmp pridialplan = local prilocaldialplan = local nationalprefix = 0 internationalprefix = 00 echocancel = yes context=RDSI group = 1 ; S/T port 1 channel => 1-2 ; S/T port 2 channel => 4-5 ; S/T port 3 channel => 7-8 ; S/T port 4 channel => 10-11 switchtype =fxo_ks context=EXTENSIONES group = 2 channel =>13-16 ------ extensions.conf [RDSI] exten => _X.,1,Dial(ZAP/g2/${EXTEN},60) exten => _X.,...

Hello, I'm trying to set up a b410p rdsi card, and I'm having problems getting it up. I followed the instruction on asteriskguru and everything seem to be fine but all leds on the card are in red. [root@rdsipbx ~]# uname -a Linux rdsipbx 2.6.15.7 #2 Tue Jun 5 16:37:07 CEST 2007 i686 i686 i386 GNU/Linux [root@rdsipbx ~]# dmesg |grep...

Hi list! Sorry for this slightly off-topic message but does anybody know if the standard for ISDN BRI is the same in Spain as it is in the rest of Europe (or the Netherlands). Will a standard HFC-S card work?

Hi everyone. I'm a bit of a Linux newbie, but I've been doing tech stuff for ages. I'm also brand new to *. I've been reading the Voip.org wiki, and perusing the list archives for a while since I've been asked to investigate using IP telephone / soft phones for a call-center type scenario. People (marketing folks) have pointed me at Cisco, but I really don't wanna.

...must be considered a bug or a "requested feature" to let ssh choose the length of its own data packets. Due to this problem I can't properly use ssh for tunneling VNC or SMB shares or even cvs (with -Z option activated). P.S.: All the test I have made are based on ADSL 256/128 and RDSI connections. Also notice that all the VPN solutions I have tested provide for some method to control packet length to avoid problems .( CIPE, POPTOP, OpenVPN) so maybe is just a matter of "copy and paste" some free available code. ------- You are receiving this mail because: -------...

...>--- [channels] language=es context=default usecallerid=yes callerid=asreceived callwaiting=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes musiconhold=default useincomingcalleridonzaptransfer=yes ; tarjeta rdsi hfc-s signalling=bri_cpe_ptmp switchtype=euroisdn language=es pridialplan=local prilocaldialplan=local rxwink=300 usecallerid=yes hidecallerid=no callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwh...