asterisk users - Feb 2005 - SV: SV: QSIG, Asterisk and Eicon DIVA

I have read most of Eicons information on Q.SIG, and I am able to load the Q.SIG
protocol (instead of ETSI for example). No strange logging in divacrtl mlog.

But how do I tell Asterisk to understand Q.SIG?

My PBX is configured for QSIG, but I cannot see anything on my trace when trying
to make a call via the S0(Q.SIG)

Janne 
> -----Ursprungligt meddelande-----
> Fr?n: asterisk-users-bounces@lists.digium.com 
> [mailto:asterisk-users-bounces@lists.digium.com] F?r Peter Svensson
> Skickat: den 24 februari 2005 09:58
> Till: Asterisk Users Mailing List - Non-Commercial Discussion
> ?mne: Re: SV: [Asterisk-Users] QSIG, Asterisk and Eicon DIVA
> 
> On Thu, 24 Feb 2005, Jan Berggren wrote:
> 
> > > Is the zapata.conf file used at all for CAPI? I though all the 
> > > physical to connection layer stuff was handled by capi and not 
> > > asterisk? Wouldn't the signalling be configured in the capi 
> > > configuration files?
> >
> > That was my impression as well, I tried adding 
> switchtype=qsig in zapata.conf, but all I see is the capi 
> information... No connection...
> 
> A quick search on Google gave some interesting-looking results:
>   
> http://www.google.com/search?sourceid=mozclient&ie=utf-8&oe=ut
> f-8&q=eicon+q.sig
> 
> Also, these short exchanges of questions/replies are easier 
> to follow as a conversation if you bottom-post instead of top-posting.
> 
> Peter
> 
> 
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users@lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>

On Thu, 24 Feb 2005, Jan Berggren wrote:
> I have read most of Eicons information on Q.SIG, and I am able to load
> the Q.SIG protocol (instead of ETSI for example). No strange logging in
> divacrtl mlog.
> 
> But how do I tell Asterisk to understand Q.SIG?
Is Asterisk involved on a low enough level to even care about the tansport 
mode when using the capi channel? I though Asterisk only requested a call 
to be placed or received etc. 
> My PBX is configured for QSIG, but I cannot see anything on my trace
> when trying to make a call via the S0(Q.SIG)
Are there any debugging / tracing options in capi?

Peter

Hi to all
my local reseller gave me this price for the Eicon DIVA server boards...

Diva Server BRI-2M ........  749  Euros

Diva Server 4BRI-8M ......1927 Euros

Diva Server PRI E1/T1 .... 3796 Euros



I think that they are expensive. Is this the normal price?

I just hope that Asterisk and my Siemens HP3000 can work with it....

Thanks

Jo?o Pereira

Are you using a Diva SERVER board or just a Diva PCI?
I also whant to connect Asterisk with a Siemens HH3000, but I whant to know
if it can be done with an Eicon PCI or with a Digium board, because the
Eicon DIVA Server 4BRI is very expensive.

Joao Pereira

----- Original Message -----
From: "Peter Svensson" <psvasterisk@psv.nu>
To: "Asterisk Users Mailing List - Non-Commercial Discussion"
<asterisk-users@lists.digium.com>
Sent: Thursday, February 24, 2005 9:42 AM
Subject: Re: SV: SV: [Asterisk-Users] QSIG, Asterisk and Eicon DIVA

> On Thu, 24 Feb 2005, Jan Berggren wrote:
>
> > I have read most of Eicons information on Q.SIG, and I am able to load
> > the Q.SIG protocol (instead of ETSI for example). No strange logging
in
> > divacrtl mlog.
> >
> > But how do I tell Asterisk to understand Q.SIG?
>
> Is Asterisk involved on a low enough level to even care about the tansport
> mode when using the capi channel? I though Asterisk only requested a call
> to be placed or received etc.
>
> > My PBX is configured for QSIG, but I cannot see anything on my trace
> > when trying to make a call via the S0(Q.SIG)
>
> Are there any debugging / tracing options in capi?
>
> Peter
>
>
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users@lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>

On Thu, 24 Feb 2005, Joao Pereira wrote:
> my local reseller gave me this price for the Eicon DIVA server boards...
> 
> Diva Server BRI-2M ........  749  Euros
> 
> Diva Server 4BRI-8M ......1927 Euros
> 
> Diva Server PRI E1/T1 .... 3796 Euros
> 
> I think that they are expensive. Is this the normal price?
The Diva Server cards are expensive because they have on board dsp chips. 
Have you considered the cheaper alternative of using Junghanns 
quad/octobri cards for bri and Digium TE4xxP cards for PRI? Both of these 
use the cpu for the signal processing and are a lot cheaper. 

Sangoma cards have on board processing as well but Asterisk does not use 
that at the moment.

I think these three cards are the most commonly used together with 
Asterisk.

Peter