search for: 4bri

Hi (Armin)! Does someone knows how to identify the type of the card? The delivery note says it is a V-4BRI-8M, whereas lspci reports a 4BRI-8M. What is it really? Are there any Eicon tools to identify the card type? thanks klaus 0000:0a:03.0 Network controller: Eicon Networks Corporation Diva Server 4BRI-8M Rev 2 (rev 01) Subsystem: Eicon Networks Corporation Diva Server 4BRI-8M Rev 2...

Hi! I have some (short) question about the Eicon DIVA (V-)4BRI cards I want to have (short) answered before buying the DIVA card. I know there are several Eicon guys active on the list, thus I ask on the list instead of directly to Eicon so that all other will benefit as well. 1. Do Eicon DIVA (V-)4BRI cards support TE and NT mode? 2. Can the clock (maste...

...vacapi: Rel:2.0 Rev:1.24 Build: 105-75(local) divacapi: module unloaded. Eicon DIVA - CAPI Interface driver (http://www.melware.net) divacapi: Rel:2.0 Rev:1.24 Build: 105-75(local) and they work at a CAPI level : Update CFGLib information ... succeeded Start adapter Nr:1 - 'Diva Server V-4BRI-8', SN: 23208 ... OK (already active) Successfully updated configuration of Diva Server V-4BRI-8 PORT: 0 SN: Successfully updated configuration of Diva Server V-4BRI-8 PORT: 1 SN: Successfully updated configuration of Diva Server V-4BRI-8 PORT: 2 SN: Successfully updated configuration o...

Hello, I acquired a Diva Server 4BRI for an AsteriskPBX system and installed a 2.4.20 kernel modified with the latest eicon capi2.0 support from www.melware.net. Capi support seems to work fine: Asterisk+chan_capi answers the calls. However if I try to use my old isdnutils apps by loading a i4l compatibility layer then I have the fo...

We have set up an HP DL380 with 3 4BRI cards, Fedora core 2 (kernel 2.6.10) and asterisk (bristuff-0.2.0-RC7f with asterisk 1.0.5). 4 ports are configured in TE mode and connected to the PSTN; the other 8 are in NT mode and connected to isdn phones. the other outbound calls to PSTN are fine, however, when we call cellular phones, often...

Hey guys This is probably for Armin, but I thought maybe someone else might have something I could try. I'm having a problem with one of my Eicon Diva V-4BRI cards and I'm trying to work out if its a driver configuration error, card failure or telco problem: I have an Asterisk box running -- the Eicon drivers see all four ports on my card, capi.conf is configured with all four ports and when I issue a "capi info" on the Asterisk CLI, I...

Hello, I need to connect one diva server 4bri to a portuguese BRI interface. The operator (PT) said that this bri is in point-to-multipoint mode (S0). Previously one PBX has connected to that interface. The asterisk and diva drivers are working ok but i cannot communicate to outside via this bri. Xlite gives me the message: "call failed:...

Hi *, I want to integrate the Eicon Diva 4Bri Card to Asterisk. Eicon drivers and capi is installed. I use the latest dev version from eicon compiled and installed for my fedora 2 system. I found the chan_capi for asterisk from www.junghanns.net. Also loaded the patch and applied to the chan_capi source tree. I changed the Makefile to inclu...

Hi, I am trying to configure a Diva Server 4BRI to work with chan_capi. Here are the steps that I took: - compiled fresh kernel with new-style CAPI support: i4l_divas_1.2 - got the divactrl_1.2 utilities, configured the card startup scripts, - rebooted, card firmware loaded properly, "capiinfo" displays detailed info on 4 controll...

Hey, If anyone supplies or knows where I can get either an Eicon Diva V-4BRI or a Junghanns QuadBRI card in Australia, please could you contact me offlist? Also, if anyone has any second-hand ones they need to get rid of, I'd be interested in making an offer! I've been checking eBay, but there don't seem to be any of these available at the moment. Thanks, Avi...

...ge----- > From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users- > bounces@lists.digium.com] On Behalf Of Mark Aufflick > Sent: Monday, 13 March 2006 16:49 > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: Re: [Asterisk-Users] Australian approved 4BRI PCI adapter > preliminarytesting results > > Hi James - can you please post the brand/model of the card and > supplier/cost etc. > > Cheers, > > Mark. > > On 3/13/06, James Harper <james.harper@bendigoit.com.au> wrote: > > I have successfully placed a c...

Hello, I just received a couple SX440isdn phones and was wondering if they can be plugged into a Diva 4BRI port in NT mode and work with asterisk+chan_capi? I know they probably work fine with mutliHFC cards with either bristuff of chan_misdn but since I have some spare Divas, I was curious about their potential as phone ports. The Diva's 3 and 4 ports are already set to NT mode at boot time: /...

Currently we have problems with our asterisk server connect with an Eicon Diva 4BRI Card to a PBX. Asterisk is running in version 1.0.0 on RedHat Enterprise Linux 3AS with kernel 2.4.21-4.EL. The Diva server is running in version 7.5 Can someone help us in reolving the errors with incoming calls? When we try to call to an extension we get these messages in the CLI: -- creati...

Are there any step by step instrunctions on how to install drivers and I guess bristuff for this card? Just need to use it to handle voice on 2 BRI circuits (UK) then utilise with Asterisk and some Digium cards handling POTS phones (and some VoIP out the back). It's the EICON card stuff and how to make it all work I'm finding confusing? Steve -- NetTek Ltd UK mob +44-(0)7775 755503

...n, recompiled * + Zaptel and administered my stress-test. The machine stayed up in excess of 15 minutes, so I assumed a hardware or timing-problem had caused the panics on the old box and continued installing the other components (Kernel v2.4.21, with Eicon Diva Server- drivers, for the Diva Server 4BRI PCI v2.0 in that box, amongst others). After I had it up and running like the old server, I gave the stress-test another go, just to be sure, and sure enough, after just 1 or 2 minutes, it croaked again, with the familiar panic. I was quick to diagnose that the most probable difference that could...

Hello, Dos anybody use these card with asterisk? If so I'd like to have some tips on how to configure them. Regards, Daniel ANDRE -- Daniel ANDRE (mailto:dandre@iris-tech.fr) IRIS Technologies - http://www.iris-tech.com Serveur kwartz - http://www.kwartz.com

Hi, just a quickie... We've bought one of these primarily for Hylafax use, but since this card can run in NT mode, I'd be curious to use one of the four ports on it to 'serve' our PBX as a trunk for tests and playing with Asterisk. My question is, "Is it likely that we can use 3 ports with Hylafax in normal ISDN client mode, and the remaining port in NT mode with

I have successfully placed a call into and out of the card from Asterisk using vISDN. The current vISDN snapshot now contains the PCI id's for the card so no patching should be required. Most of the initial testing failure was due to misconfiguration of vISDN by me and a bad entry in my sip.conf resulting in one way audio. So I have established that at least 1 channel of 1 port works in TE

Hi Guys Just wondering if you can help me and give me some pointers on what could be wrong in my setup. Everything seems to be installed. I have Asterisk 1.2.12.1 FreePBX 1.2.3 IAXModem 0.1.15 Chan_capi 0.7.0 The IAXmodem registers, faxgetty is starting in /var/log/messages but it just doesn't seem to pickup the call. In Chan_capi it says fax detected but no fax

Hi Everybody, Has anybody tried the above (or indeed any other 4XBRI cards) successfully with Asterisk. As far as I can see the above mentioned card is an active ISDN card but supported by it's own I4L driver. This leads to interesting questions particularly regarding echo cancellations (which usually doesn't work on the cheap passive cards with one exception as far as I can see).