asterisk users - Jan 2005 - Bristuffed Asterisk 1.0.3 hfc-s card doesn't work

I hva ean HFC-S card in a box that I'm trying to get to work with 
bristuffed Asterisk 1.0.3. The box is an Athlon64 running a RHEL rebuild 
with a plain vanilla 2.6.10 kernel. I tried both APIC and NOAPIC mode.

The installation went ok and does give output that seems correct

SPAN 1: CCS/ AMI Buil-out: 399-533 feet (DSX-1)
2 channels and one D-channel

Even though I've configured * to immediately accept calls I do not see any 
calls coming in, when I dial the phone number I get the tone that the 
number is disconnected. When I try zttool to do a loopback test, it just 
displays Looping UP span 1 for about 20 seconds and returns to the menu 
without any message. It doesn't show any alarms.

Any ideas what could be going wrong, how can I test the ISDN card any 
other way?

The line and telephone cord are both OK, when I connect the cord to the AB 
adapter it just works.

Thanks!

On Sun, 9 Jan 2005, Remco Barende wrote:
> I hva ean HFC-S card in a box that I'm trying to get to work with
bristuffed
> Asterisk 1.0.3. The box is an Athlon64 running a RHEL rebuild with a plain 
> vanilla 2.6.10 kernel. I tried both APIC and NOAPIC mode.
>
> The installation went ok and does give output that seems correct
>
> SPAN 1: CCS/ AMI Buil-out: 399-533 feet (DSX-1)
> 2 channels and one D-channel
>
> Even though I've configured * to immediately accept calls I do not see
any
> calls coming in, when I dial the phone number I get the tone that the
number
> is disconnected. When I try zttool to do a loopback test, it just displays 
> Looping UP span 1 for about 20 seconds and returns to the menu without any 
> message. It doesn't show any alarms.
>
> Any ideas what could be going wrong, how can I test the ISDN card any other
> way?
>
> The line and telephone cord are both OK, when I connect the cord to the AB 
> adapter it just works.
>
> Thanks!
Sorry, it was me :(

I loaded zaptel first then zaphfc.

This generates no error message (shouldn't it??) but just doesn't work.