similar to: Bristuffed Asterisk 1.0.3 hfc-s card doesn't work

One my of my CDs has a bar code, 4 011222 044068, which is titled "EAN CODE". Another one simply has a barcode, 07822-18646-2, without any title. Should I assume that the barcode of any CD is the EAN code? I'm asking this because I want to know how to title the comment of the Vorbis file -- "EAN code" or "Barcode". Thanks. -------------- next part

Hello everyone, I bought 2 HFC-ISDN Cards and want to run the first card in NT-Mode an the second one in TE-Mode. Everything looks ok under SuSE 9.1, but I can't dial out. I removed one card, for testing purposes and want to run this one card in TE-Mode. I only want to make a call with my Grandstream BT-101 over Asterisk via ISDN. When I try to make a call I get: ---------------------

Hi! I have 1.0.3-BRIstuffed and hfc-s card ztcfg says that card is configured (2 B and 1 D channel) but asterisk don't pickup any calls. Any ideas? Regards, Corvin

Hi, Bristuff works great with HFC card... your compilation problem may come from your kernel configuration... You should check this doc, at least, for the redhat config : http://www.automated.it/guidetoasterisk.htm Then, installation of Bristuff works like as charm ! Bye David Masure -----Message d'origine----- De : vdasilva [mailto:aquamoon@wol.co.za] Envoy? : mardi 28 juin 2005 09:01

Hello I have asterisk running in Red Hat 9 with a cheap HFC card on i4l. I have choppy sound problems sometimes, and echo problems often. I am using a 2 port Grandstream ATA, Grandstream BT and a Grandstream GPX-2000 I read that changing to BriStuff will fix the echo problems, but have also read other users say that the only way they solved the echo/choppy sound problems was using a Fritz ISDN

Hello All, Thank you in advance. I have looked up and down in the archives to see if I could find some help on moving the polygons to the background of a ts.plot. I've tried panel.first in the gpars(...) arguments and trellis.focus, but I get errors. Am I missing something easy here? Here is my script: ts.plot(tsdjia, tstenyield, gpars = list(xlab = " ", ylab = " ",

I want to plot the unstadardized version of a normal plot.  Can you explain why that is not working? Dev.set(1) xcrit=-1.645 cord.x <- c(-3,seq(-3,xcrit,0.01),xcrit) cord.y <- c(0,dnorm(seq(-3,xcrit,0.01)),0)            # what does final 0 do here? curve(dnorm(x,0,1),xlim=c(-3,3),main='Normal PDF') polygon(cord.x,cord.y,col='orange')

Hi, Nowadays, the design of an application is nearly as important as its functionality. But - most good programmers are not automatically skilled designers. Especially when it comes to the creation of fancy icons or small illustrations. So, where do you find good and affordable designers and illustrators for your commercial (rails) projects ? Cheers, Ean -- Posted via

Hi folks, I've already searched the mailing list but no one else seems to have my same problem. I'm using Asterisk with the following configuration: Fedora Core 4 (but I also tried Fedora 3) 1 Digium TE110P 1 TDM40B 1 HFC-S 'Cologne' bristuff 0.2.0-RC8o (zaptel 1.0.9.2) I compiled right, I can load kernel modules but when I try to unload wcte11xp module (the one

Good morning, I have succesfully buil ovirt on fedora 11 but running ace -d l /tmp/ace.log install ovirt I got en error (I think it is krb5 issue). My server was not a kerberos server before installing ovirt, so I think ace procedure has installed it. Attacchede here there is the ace.log file. Could anyone help me ? Thanks & Regards Ignazio -------------- next part -------------- A non-text

The survival package, like many others, has several helper functions that are not declared in the namespace, since their only use is to be called by other "main" functions of the package.? This works well since the functions in the survival namespace can see them --- without ::: arguments --- and others don't. Until a situation I ran into this week, for which I solicit comments

Hello, ? What I really want to do is to add a rejection region in the form of a long rectangle to a density plot I have drawn.? I am getting? 2 plots.? How can I add rectangle to first plot?? see code below. First section works fine.? It just is not quite what I want. # NORMAL DISTRIBUTION PLOT OF RAW DATA WITH UPPER CRITICAL LEVEL - ok xcrit=144.1 # *** single-sample Upper one-tailed

Hi all, I´m plotting cf (with two axis) and addind a shaded color up and down on the 0 line x axis (tfr1 is the time). The thing is that when I plot this graph adds a line up on the "first" plot. I hope you can understand what I mean. How should I erase this sencond line, it is suposed they have the same data? Why zero line doesn´t complete the shaded area?

Hi all, I have a hangup problem when i get incoming calls on my ISDN interface. I use ISDN network controller [HFC-PCI] and asterisk with florz patch. Logs when the hangup happens follows: May 6 20:52:47 NOTICE[11532] cdr.c: CDR on channel 'Zap/1-1' not posted May 6 20:52:47 NOTICE[11532] cdr.c: CDR on channel 'Zap/1-1' lacks end May 6 20:52:47 DEBUG[11532] pbx.c: Expression

Hello, Is it possible, for testing, to connect an cat5 straight patch cord between 2 ports of a Digium B410P card and use these 2 ports as a normal dahdi trunk ? I've tried this: One port is set as NT, the other as TE. I would expect timing to come for system hardware so I choose in /etc/dahdi/system.conf : span=1,0,0,ccs,ami span=2,0,0,ccs,ami Results: - both ports lights are green -

Hi everyone. We have a problem here... Hope somebody can give us some hints. We have a HP ProLiant DL180 G6 Server with a Debian/Lenny sytem. Asterisk 1.4.21.2 (1.4.21.2~dfsg-3+lenny1) with zaptel (1.4.11) and libpri (1.4.3) is installed. There is a QuadBRI-Card installed: # lspci -vv -s 06:04.0 06:04.0 ISDN controller: Cologne Chip Designs GmbH ISDN network Controller [HFC-4S] (rev 01)

Hi list, After upgrading from Asterisk v1.2 to v1.4.14, all kinds Zaptel error messages related to my HFC-S PCI card disappeared, but now I can't access the card's resources because it always seems to be busy. Any idea why? Thanks, Jaap PS -- Below is some info regarding my configuration. =========================== Zaptel version: 1.4.7 (incl. firmware and modules). OS: Debian

Hello, I have a problem with the Bristuffed version of Asterisk. I have tried Bristuff-0.3.0-pre-1m,n,o,p (Asterisk 1.2.6 to 1.2.7.1) but they all have the same problem it seems: The setup: A machine with a single hfc-s PCI BRI adapter running Gentoo 2.6.15. Asterisk 1.2.0 (BRIstuffed-0.3.0-PRE-1) installed and working perfectly. Grandstream gxp-2000 as a SIP phone, and a normal mobile

hello, i have a problem starting asterisk with one x100p digium and two hfc chipset isdn cards with bri-stuff.0.0.2. "ztcfg -vv" shows me a this info: Zaptel Configuration ====================== SPAN 1: CCS/ AMI Build-out: 399-533 feet (DSX-1) Channel map: Channel 01: FXS Kewlstart (Default) (Slaves: 01) Channel 02: Individual Clear channel (Default) (Slaves: 02) Channel 03:

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 hi, i'm new to * I've installed an hfc-s card (DIGI Micro V) with bristuff 0.0.2; when i try to call outside i get: -- Accepting AUTHENTICATED call from 192.168.1.110, requested format = 1024, actual format = 1024 -- Executing Dial("IAX2[pippo@pippo]/2", "Zap/g1/0123456") in new stack Jul 13 13:42:49