search for: bristuffed

I'm using bristuffed Asterisk with ISDN/ZAPHFC I have VERY ugly (outgoing) sound through ISDN/HFC if echocancel=yes in zapata.conf, but without echocancel I have bad (incoming) echo Through PSTN/FXO sound is ok with or without echocancel. I tried other echo cancellers (in zconfig.h) two times: ECHO_CAN_KB1 (this was...

I'm using Asterisk 1.0.2-BRIstuffed-0.2.0-RC2b - when anyone picks up a call with '*8' - the call will drop after about 20 or so seconds. Is this a general problem with Asterisk 1.0.2? As this is the latest release that it appears Klaus-Peter Junghanns has for public consumption - is there anything I can patch for just this...

Hi all, My BRIstuffed 0.2.0-RC7k is running fine on my debian box for voice calls over ISDN2. Now I want to implement receiving incoming faxes into my setup so I did a google and some reading on the wiki. I got the spandsp 0.0.2pre10 package compiled and installed, patched asterisk's apps makefile and compiled * aga...

.../src/zbristuff-0.2.0-RC8o/zaptel-1.0.9.2/wcte11xp.c:d964000 4) already locked by /usr/src/bristuff-0.2.0-RC8o/zaptel-1.0.9.2/wcte11xp.c/887. (Not tainted) This happens if I load and unload by zaptel script or if modprobe or insmod 'by hand', then run ztcfg and the unload the module. No bristuffed zaptel works right and bristuffed zaptel module for TDM40B works right. The card does not share IRQ with other devices, anyway I tried to have only TE110P mounted on PCI slot and to change PCI slot where card is mounted. Nothing to do. I really don't know what else I can try. Thank...

I hva ean HFC-S card in a box that I'm trying to get to work with bristuffed Asterisk 1.0.3. The box is an Athlon64 running a RHEL rebuild with a plain vanilla 2.6.10 kernel. I tried both APIC and NOAPIC mode. The installation went ok and does give output that seems correct SPAN 1: CCS/ AMI Buil-out: 399-533 feet (DSX-1) 2 channels and one D-channel Even though I've...

Hi list! I'm using phones that emulate a Cisco 7940 with chan_sccp. When I was using Asterisk 1.0.5 (bristuffed) I never had any such message on the console. The phones do work. Is this a bug in chan_sccp or a feature of asterisk 1.0.6? Thx!

Hi, I'm getting unusable DTMF detection with DISA on incoming ZAP channel (bristuffed *) on quadbri from GSM gateway. DTMF detection works ok in normal ISDN incoming line. How can I check what's going on ? What settings to check ? Anyone with more experience on such scenarios ? Thanks in advance, regards, Rob.

Hi, I'm getting unreliable dtmf recognition (it works fine for 4-5 digits, errors (duplicates) on more), when transferred inband from gsm gateway to NT port of quadbri under bristuffed Asterisk..... Since Asterisk is claimed to have good dtmf recognizer, I suspect there are some settings to workarouned... I've tried dtmf relax, but didn't help, so I suspect gain settings.... Is there any other possible cause of unreliable dtmf inband recognition ? Where can I set gai...

Hi! Asterisk in Debian/Lenny claims to be bristuffed, not? At least the the Debian patch tracking system shows the bristuff-patches: [1] http://bit.ly/bRRHe7 We have a QuadBRI-Card and recently needed support from Junghanns.net but they refused telling us there is no bristuff installed because of the show version output: *CLI> show version Aste...

I have Asterisk 1.0.5-BRIstuffed-0.2.0-RC5 up and running. Everything seems to be running fine but after some time asterisk just goes crazy (even withouth any incoming or outgoing call activity perviously). If I leave the box up for some time * goes haywire and the console is flooded with this message: Ouch ... error while wri...

I tried to get callerid working the normal way but the cid is never passed to the phone. It doesn't work untill I set SetCIDNum(0${PRI_NETWORK_CID}) in extensions.conf which I found in the wiki: http://www.voip-info.org/tiki-print.php?page=Asterisk+zaphfc Is this intended behaviour, or still a bug? It does work but it only shows one zero even though I have nationalprefix = 0

Hi, I'm using spandsp-0.0.3 [http://www.soft-switch.org/downloads/snapshots/spandsp/ spandsp-20061116.tar.gz] on a bristuffed asterisk (1.2.13) [http://212.91.251.199/~junghanns.net/downloads/bristuff-0.3.0- PRE-1v.tar.gz] libtiff is at version 3.6.0 Running on: Linux router2 2.6.17-2-686 #1 SMP Wed Sep 13 16:34:10 UTC 2006 i686 GNU/Linux Debian testing distro. I've tried many combinations of bristuffed ast and...

Hi! I have 1.0.3-BRIstuffed and hfc-s card ztcfg says that card is configured (2 B and 1 D channel) but asterisk don't pickup any calls. Any ideas? Regards, Corvin

Hi, I'm banging my head on compiling bristuff modules for Suse 10.0 with kernel : Linux laps1 2.6.13-15.7-smp #1 SMP Tue Nov 29 14:32:29 UTC 2005 x86_64 x86_64 x86_64 GNU/Linux and Asterisk 1.2.1-BRIstuffed-0.3.0-PRE-1f . I get this : laps1:~/Voipy/1.2.1/bristuff-0.3.0-PRE-1f/zaphfc # make load make -C /usr/src/linux-2.6 SUBDIRS=/root/Voipy/1.2.1/bristuff-0.3.0-PRE-1f/zaphfc ZAP=-I/root/Voipy/1.2.1/bristuff-0.3.0-PRE-1f/zaptel-1.2.1 modules make[1]: Entering directory `/usr/src/linux-2.6.13-15.7...

I have 13 Snom 320 with asterisk 1.07 bristuffed. The problem is that sometimes on random basis, when one customer is placed on hold and another call arrives, the customers are put in conference with each other. This look very strange to me, but I've disabled the confernce button on the snom phones to prevent the human errors, but it still oc...

Hello, I have a problem with the Bristuffed version of Asterisk. I have tried Bristuff-0.3.0-pre-1m,n,o,p (Asterisk 1.2.6 to 1.2.7.1) but they all have the same problem it seems: The setup: A machine with a single hfc-s PCI BRI adapter running Gentoo 2.6.15. Asterisk 1.2.0 (BRIstuffed-0.3.0-PRE-1) installed and working perfectly. Grandstre...

I have a problem with Asterisk-bristuffed using a zaphfc card. I am located in the Netherlands, so I have an ISDN line from KPN. When I start Asterisk, and plug in the ISDN line, everything works perfectly for about 5 minutes. And then the ISDN line is down for 1 minute, and after that minute, the line comes back up and works for another...

...hone1 is hangup 5. Pickup Phone1 and dial 701 6. The Phone1 is connected back to phone2 7. I can hear the voice both sites for 1 second and then asterisk craches with segmentation fault or asterisk craches with segmentation fault Any Idea ot it is a bug ? Asterisk verion - Asterisk 1.0.5-BRIstuffed-0.2.0-RC7e here is the config and the output : extensions.conf : [general] static=yes writeprotect=no [globals] [default] exten => 1000,1,Dial(SIP/1000,60,tTrg) exten => 1001,1,Dial(SIP/1001,60,tTrg) include => parkedcalls exten => t,1,Hangup sip.conf : [general] context=default...

Hi all, I'm using Asterisk 1.0.9-BRIstuffed-0.2.0-RC8o on box A with a TE410P (EuroISDN cpe) connected to another similar asterisk box B acting as EuroISDN master. I'm performing some load tests by contiously feeding up to concurrent 30 call files to /var/spool/asterisk/outgoing/ on box A which inititate via a dialplan context/extensi...

Hi, we've purchased new Beronet Octobri card and have problems loading modules for stock Asterisk for Debian Sarge (it has bristuff patches in it). when loading qozap it says that no multibri card was found although lspci shows it... There were quite some rumours about bristuff not liking other than junghanns cards, but don't know if something happened.... Anyone recently used this