John Middleton
2005-Jan-06 15:37 UTC
[Asterisk-Users] TDM4000P with 4 FXO's not picking up ringing lines
Ive just installed a TDM4000P with 4 fxos. The zaptel config is fine, zttest comes back with configured. If i call a line when zttest it shows on the display,and then goes when the line drops. In * when a call comes in, it follows my dialplan and answers the call according to the log, but IT DOESN'T actually pick up the call, i.e. it continues ringing. I'm using KS signalling, and connected to the UK phone system. Anyone seen this before, or give me some pointers, or suggest what I should post for diagnostic purposes? Thanks John.
John Middleton
2005-Jan-06 15:42 UTC
[Asterisk-Users] TDM4000P with 4 FXO's not picking up ringing lines
Yeah, it executes the answer in the script, and goes on to play music etc, but the line isnt actually answred IE continues ringing On Thu, 6 Jan 2005 22:41:09 +0000, Phil Quinney <quinneyp@dcs.kcl.ac.uk> wrote:> Hi John, > > Have you got a line like this: > > Exten => s,1,Answer > > You need to actually answer the call before that ringing will stop. > > Hope this helps, > > Phil. > > > > > In * when a call comes in, it follows my dialplan and answers the call > > according to the log, but IT DOESN'T actually pick up the call, i.e. > > it continues ringing. > > > > I'm using KS signalling, and connected to the UK phone system. > > > > Anyone seen this before, or give me some pointers, or suggest what I > > should post for diagnostic purposes? > > > > Thanks > > John. > > _______________________________________________ > > Asterisk-Users mailing list > > Asterisk-Users@lists.digium.com > > http://lists.digium.com/mailman/listinfo/asterisk-users > > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > ------------------------------------------------------------------------ > -------------------------- > Phil Quinney > IT Consultant - Any-Ideas > >
timebandit001@gmail.com
2005-Jan-06 15:45 UTC
[Asterisk-Users] TDM4000P with 4 FXO's not picking up ringing lines
maybe a stupid question but, did you include "Answer" in your dialplan ?
Chris Glover
2005-Jan-06 15:47 UTC
[Asterisk-Users] TDM4000P with 4 FXO's not picking up ringing lines
On Thu, 6 Jan 2005, John Middleton wrote:> Ive just installed a TDM4000P with 4 fxos. The zaptel config is fine, > zttest comes back with configured. If i call a line when zttest it > shows on the display,and then goes when the line drops. > > In * when a call comes in, it follows my dialplan and answers the call > according to the log, but IT DOESN'T actually pick up the call, i.e. > it continues ringing. > > I'm using KS signalling, and connected to the UK phone system. > > Anyone seen this before, or give me some pointers, or suggest what I > should post for diagnostic purposes? >For the FXO ports on the card, you need to use FXS signalling. FXS_KS in your case. Confused? you should be :-) HTH Chris -- Chris ---------------------------------- E Mail: chris@glovercc.clara.co.uk SIP: 84411389@voiptalk.org IAXTEL: 17003366726
Phil Quinney
2005-Jan-06 16:07 UTC
[Asterisk-Users] TDM4000P with 4 FXO's not picking up ringing lines
They should be set to no - sorry, I should have been clearer. Busydetect and callprogress cause my X100P's to not answer calls if I have them enabled. Phil. On 6 Jan 2005, at 22:56, John Middleton wrote:> what should those two settings say? should i set them to yes, or take > the lines out?>> OK: Do you have these in zapata.conf? >> >> busydetect=no >> callprogress=no >> >> They won't work in the UK.
Ernie Ankele
2005-Jan-06 16:41 UTC
[Asterisk-Users] TDM4000P with 4 FXO's not picking up ringing lines
Exactly. I know this is not preferred, but it is the only way I can get around the problem currently (strange state message). I am sure the call progress and busy detect are both no in my conf. I am looking for a "More Correct" answer to this as well. On Jan 6, 2005, at 4:34 PM, John Middleton wrote:> What do you mean, as your first priority, you mean exten => > s,1,Answer? > > > On Thu, 6 Jan 2005 16:21:35 -0700, Ernie Ankele <ernie@ankele.net> > wrote: >> Yes, I am getting the exact same messages on my console if I do not >> answer the call as my first priority >> in the dialplan. >> >> On Jan 6, 2005, at 4:11 PM, John Middleton wrote: >> >>> They are set to No.... HMMM >>> >>> I get message Ring/off-hook in strange state 6 on channel1 in the log >>> >>> Anyone seen this before >>> >>> >>> On Thu, 6 Jan 2005 23:07:39 +0000, Phil Quinney <phil@any-ideas.com> >>> wrote: >>>> They should be set to no - sorry, I should have been clearer. >>>> >>>> Busydetect and callprogress cause my X100P's to not answer calls if >>>> I >>>> have them enabled. >>>> >>>> Phil. >>>> >>>> On 6 Jan 2005, at 22:56, John Middleton wrote: >>>> >>>>> what should those two settings say? should i set them to yes, or >>>>> take >>>>> the lines out? >>>> >>>>>> OK: Do you have these in zapata.conf? >>>>>> >>>>>> busydetect=no >>>>>> callprogress=no >>>>>> >>>>>> They won't work in the UK. >>>> >>>> >>> _______________________________________________ >>> Asterisk-Users mailing list >>> Asterisk-Users@lists.digium.com >>> http://lists.digium.com/mailman/listinfo/asterisk-users >>> To UNSUBSCRIBE or update options visit: >>> http://lists.digium.com/mailman/listinfo/asterisk-users >>> >> >> >
Ernie Ankele
2005-Jan-06 17:49 UTC
[Asterisk-Users] TDM4000P with 4 FXO's not picking up ringing lines
Here you go, I was on my home from work: [channels] language=en context=from-pots signalling=fxs_ks usecallerid=yes callerid=asreceived cidsignalling=bell hidecallerid=no busydetect=no callprogress=no callwaiting=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes canpark=yes cancallforward=yes echocancel=yes echocancelwhenbridged=yes relaxdtmf=yes rxgain=0.0 txgain=0.0 channel => 1 On Jan 6, 2005, at 5:20 PM, John Middleton wrote:> and yr zapata.conf please > > > On Thu, 6 Jan 2005 17:01:36 -0700, Ernie Ankele <ernie@ankele.net> > wrote: >> Here is the pertinent section of my extensions.conf: >> [from-pots] >> exten => s,1,Answer >> exten => s,2,Dial(sip/2001&sip/2002&sip/2003,20,t) >> exten => s,3,Voicemail(u2000) >> exten => s,103,Voicemail(b2000) >> exten => s,104,Hangup >> exten => a,1,VoicemailMain >> exten => a,2,Hangup >> exten => t,1,Hangup >> exten => h,1,Hangup >> >> >> On Jan 6, 2005, at 4:53 PM, John Middleton wrote: >> >>> Sorry, maybe I didn't explain myself - could you send me your file >>> please. >>> >>> Thanks >>> >>> John >>> >>> >>> On Thu, 6 Jan 2005 16:41:18 -0700, Ernie Ankele <ernie@ankele.net> >>> wrote: >>>> Exactly. I know this is not preferred, but it is the only way I can >>>> get >>>> around the problem currently (strange state message). >>>> I am sure the call progress and busy detect are both no in my conf. >>>> I >>>> am looking for a "More Correct" >>>> answer to this as well. >>>> >>>> On Jan 6, 2005, at 4:34 PM, John Middleton wrote: >>>> >>>>> What do you mean, as your first priority, you mean exten => >>>>> s,1,Answer? >>>>> >>>>> >>>>> On Thu, 6 Jan 2005 16:21:35 -0700, Ernie Ankele <ernie@ankele.net> >>>>> wrote: >>>>>> Yes, I am getting the exact same messages on my console if I do >>>>>> not >>>>>> answer the call as my first priority >>>>>> in the dialplan. >>>>>> >>>>>> On Jan 6, 2005, at 4:11 PM, John Middleton wrote: >>>>>> >>>>>>> They are set to No.... HMMM >>>>>>> >>>>>>> I get message Ring/off-hook in strange state 6 on channel1 in the >>>>>>> log >>>>>>> >>>>>>> Anyone seen this before >>>>>>> >>>>>>> >>>>>>> On Thu, 6 Jan 2005 23:07:39 +0000, Phil Quinney >>>>>>> <phil@any-ideas.com> >>>>>>> wrote: >>>>>>>> They should be set to no - sorry, I should have been clearer. >>>>>>>> >>>>>>>> Busydetect and callprogress cause my X100P's to not answer calls >>>>>>>> if >>>>>>>> I >>>>>>>> have them enabled. >>>>>>>> >>>>>>>> Phil. >>>>>>>> >>>>>>>> On 6 Jan 2005, at 22:56, John Middleton wrote: >>>>>>>> >>>>>>>>> what should those two settings say? should i set them to yes, >>>>>>>>> or >>>>>>>>> take >>>>>>>>> the lines out? >>>>>>>> >>>>>>>>>> OK: Do you have these in zapata.conf? >>>>>>>>>> >>>>>>>>>> busydetect=no >>>>>>>>>> callprogress=no >>>>>>>>>> >>>>>>>>>> They won't work in the UK. >>>>>>>> >>>>>>>> >>>>>>> _______________________________________________ >>>>>>> Asterisk-Users mailing list >>>>>>> Asterisk-Users@lists.digium.com >>>>>>> http://lists.digium.com/mailman/listinfo/asterisk-users >>>>>>> To UNSUBSCRIBE or update options visit: >>>>>>> http://lists.digium.com/mailman/listinfo/asterisk-users >>>>>>> >>>>>> >>>>>> >>>>> >>>> >>>> _______________________________________________ >>>> Asterisk-Users mailing list >>>> Asterisk-Users@lists.digium.com >>>> http://lists.digium.com/mailman/listinfo/asterisk-users >>>> To UNSUBSCRIBE or update options visit: >>>> http://lists.digium.com/mailman/listinfo/asterisk-users >>>> >>> _______________________________________________ >>> Asterisk-Users mailing list >>> Asterisk-Users@lists.digium.com >>> http://lists.digium.com/mailman/listinfo/asterisk-users >>> To UNSUBSCRIBE or update options visit: >>> http://lists.digium.com/mailman/listinfo/asterisk-users >>> >> >> _______________________________________________ >> Asterisk-Users mailing list >> Asterisk-Users@lists.digium.com >> http://lists.digium.com/mailman/listinfo/asterisk-users >> To UNSUBSCRIBE or update options visit: >> http://lists.digium.com/mailman/listinfo/asterisk-users >> >