Eric,
Make sure that both the X100Ps do not share their allocated interrupts with
any other card installed in your computer. If they do you will have plenty
of problems. This may need you to reposition them on the pci slots and/or
reserve interrupts for them. I had endless problems with my two cards until
I noticed that they were sharing their interrupts.
I hope this helps
Vassilis
At 06:04 03/10/2004, you wrote:>Greetings all,
>
>I've just put two X100P cards to my box and despite trying everything I
>can find on the web, I can't get the second one to work.
>
>I've edited /etc/modules.conf so that ztcfg doesn't run
automatically.
>
>To start, I run:
>
>/sbin/modprobe zaptel
>/sbin/modprobe wcfxo
>/sbin/ztcfg
>/sbin/modprobe ixj
>
>and ztcfg says:
>
>ZT_CHANCONFIG failed on channel 2: No such device or address (6)
>
>Two channels are defined in zapata.conf and zapte.conf, but only the
>first one works.
>
>Asterisk says:
>
> == Parsing '/etc/asterisk/zapata.conf': Found
> -- Registered channel 1, FXS Kewlstart signalling
>Oct 3 00:52:32 WARNING[-1218576256]: chan_zap.c:731 zt_open: Unable to
>specify channel 2: Device or resource busy Oct 3 00:52:32
>ERROR[-1218576256]: chan_zap.c:5895 mkintf: Unable to open channel 2:
>Device or resource busy here = 0, tmp->channel = 2, channel = 2 Oct 3
>00:52:32 ERROR[-1218576256]: chan_zap.c:8817 setup_zap: Unable to
>register channel '2' Oct 3 00:52:32 WARNING[-1218576256]:
loader.c:334
>ast_load_resource: chan_zap.so: load_module failed, returning -1
> == Unregistered channel type 'Tor'
> == Unregistered channel type 'Zap'
> -- Unregistered channel 1
>Oct 3 00:52:32 WARNING[-1218576256]: loader.c:429 load_modules: Loading
>module chan_zap.so failed!
>
>
>Can anyone help?
>
>Thanks,
>eric
>_______________________________________________
>Asterisk-Users mailing list
>Asterisk-Users@lists.digium.com
>http://lists.digium.com/mailman/listinfo/asterisk-users
>To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users