search for: zapt

What happens if you take out the Zaptel I/F's? If it boots, you can correct whatever you did then replace them. hth -----Original Message----- From: Chris Earle (CBL) [mailto:cearle@cbltech.ca] Sent: Tuesday, February 28, 2006 7:45 AM To: asterisk-users@lists.digium.com Subject: [Asterisk-Users] Cannot boot machine up after work...

...nloaded the asterisk from svn checkout http://svn.digium.com/svn/asterisk/trunk asterisk-trunk (is the asterisk 1.4 subversion). I also downloaded the patch for cellphone and make it work fine. Then I bought the tdm11b board to have phone connection in my computer. I installed the hardware for zapte and the libpri modules in my Mandriva 2007 and the lights of the pci card switch on. I can see zaptel working by lsmod. Now I go to my asterisk recompile it but I realize there is no chan_zap.so!!!!! When I recompile it, i check the make menuselect and the channel zapata is not appearing ther...

Greetings all, I've just put two X100P cards to my box and despite trying everything I can find on the web, I can't get the second one to work. I've edited /etc/modules.conf so that ztcfg doesn't run automatically. To start, I run: /sbin/modprobe zaptel /sbin/modprobe wcfxo /sbin/ztcfg /sbin/modprobe ixj and ztcfg says: ZT_CHANCONFIG failed on channel 2: No such device or address (6) Two channels are defined in zapata.conf and zapte.conf, but only the first one works. Asterisk says: == Parsing '/etc/asterisk/zapata.conf': Found...

...d thus can't dial! when I try dialing in from the internet to asterisk then to ZAP/g1 the pabx can see the ring and I can pick up the phone I can hear the other end, but they can't hear me. I don't believe its a firewall issue as I can't dial from the pabx okay some print outs # zaptel_hardware pci:0000:05:02.0 wctdm24xxp+ d161:8005 Wildcard TDM410P # ztcfg -vv Zaptel Version: 1.4.11 Echo Canceller: MG2 Configuration ====================== Channel map: Channel 01: FXO Kewlstart (Default) (Slaves: 01) Channel 02: FXO Kewlstart (Default) (Slaves: 02) Channel 03: FXO Ke...

...sages would contain 7 minutes of busy signal at the end of the message, and now it contains about 40 seconds after adding busydetect=yes to zapata.conf and installing the latest CVS. Any ideas would be greatly appreciated. Niles Ingalls I'm using a Wildcard T100P, and have 11 incoming lines. zapte.conf span=1,0,0,esf,b8zs loadzone=us defaultzone=us fxsls=1-11 zapata.conf ; Zapata telephony interface ; Configuration file [channels] musiconhold=default language=en context=default switchtype=dms100 signalling=fxs_ls usecallerid=yes hidecallerid=no callwaiting=yes usecallingpres=yes callwaitin...

...lly I want to connect one T1 connection in one port and in anather port of the card I'll attach my Epbx so that I can make use of existing telephone.Please help.The protocol in T1 we are using is E&M. regards rudra 1.. Login to asterisk @ home server and go to /etc directory 2.. vi zapte.conf file and put entries like this give bellow. [root@asterisk1 etc]# cat zaptel.conf # Autogenerated by /usr/local/sbin/genzaptelconf -- do not hand edit # Zaptel Configuration File # # This file is parsed by the Zaptel Configurator, ztcfg # # It must be in the module loading order...

Hello all. I have installed and functioning asterisk-1.2.9.1 where I effected one upgrade in asterisk-1.0.9, is interconnected with a PABX Siemens HiPath 4000 in ISDN PRI with protocol QSIG, the one that is happening he is that the calls originated for PABX Siemens and destined to SIP phones asterisk are being without audio, nor Ring, is dumb. They could help in this case me? Best Regards Josu?

...y issue is that you must load all modules (wcfxs, zaphfc) before runing ztcfg, otherwise nothing works. Everything works ok, even faxing. Julian. On 3/30/06, Chris Earle <cearle@cbltech.ca> wrote: > What? After hours of searching for anything to help me, I found this > comment about zaptel cards in systems with bristuff-cards (junghanns for me > in this case) > > I havent' seen any other reports of this sort of behaviour --- can anyone > confirm whether they've got a QuadBRI and TDM400P card working together in > one machine? > > > thanks :-S > &g...

...On Behalf Of Filip Dr?gowski Sent: Friday, March 31, 2006 1:40 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] Re: BRI cards, HFC, and bristuff - a generalquestionto clear up my understanding. Asterisk 1.2.4 + bristuff-0.3.0-PRE-1l + libpri-1.2.2 + zapte-1.2.3 + *CLI> zap show status Description Alarms IRQ bpviol CRC4 quadBRI PCI ISDN Card 1 Span 1 [TE] (ca? OK 0 0 0 quadBRI PCI ISDN Card 1 Span 2 [TE] (ca? OK 0 0 0 quadBRI PCI ISDN Card 1 Span 3 [T...