Displaying 20 results from an estimated 3000 matches similar to: "Second X100P card won't work"
2005 Sep 13
4
Fedora Core 4 not recognizing X100P cards
I am getting quite frustrated today, so please bear with me.
I just installed Fedora Core 4 (was running RedHat 9 with a working
Asterisk)
now my Fedora does not appear to be recognizing my X100P (clone) at all.
Hardware browser just shows them as unknown device. driver: hisax
So, of course, my zaptel drivers do not work and therefore my asterisk does
not work.
any help would be greatly
2004 Jul 08
1
x100p and two hfc isdn cards
hello,
i have a problem starting asterisk with one x100p digium and two hfc
chipset isdn cards with bri-stuff.0.0.2.
"ztcfg -vv" shows me a this info:
Zaptel Configuration
======================
SPAN 1: CCS/ AMI Build-out: 399-533 feet (DSX-1)
Channel map:
Channel 01: FXS Kewlstart (Default) (Slaves: 01)
Channel 02: Individual Clear channel (Default) (Slaves: 02)
Channel 03:
2004 Nov 25
3
Zaptel on Suse 9.0
Hi,
I have two WCT100P cards installed on a suse 9.0 box. Installation
for Zaptel complains of some unresolved dependencies. The zaptel and
wct1xxp modules load without any errors. ztcfg give no problems.
The problem is when I start asterisk I get the following error and
asterisk shuts down
2005 Jun 07
2
Problems with Junghanns QuadBri
Hi all,
i'm trying to install Asterisk with Junghanns QuadBri ISDN card: I have
followed all the instructions, and when I run "|ztcfg -tvv" I get
|
| Zaptel Configuration
======================|
SPAN 1: CCS/ AMI Build-out: 399-533 feet (DSX-1)
Channel map:
Channel 01: Individual Clear channel (Default) (Slaves: 01)
Channel 02: Individual Clear channel (Default) (Slaves: 02)
2005 Jul 28
2
Asterisk fails to start
Hello,
This is debug output I get:
Jul 28 15:05:49 WARNING[8249]: chan_oss.c:239 sound_thread: Read error on
sound
device: Resource temporarily unavailable
[chan_zap.so] => (Zapata Telephony w/PRI)
Jul 28 15:05:49 WARNING[8249]: chan_zap.c:924 zt_open: Unable to specify
channel
1: No such device or address
Jul 28 15:05:49 ERROR[8249]: chan_zap.c:6460 mkintf: Unable to open
2004 Aug 26
1
Newbie needs help - Dev_Kit_Lite installation problem
Installing DevkitLite hardware (Very similar to John Lange's post on Tue
Oct 08 2002)
I cannot get anything to work on the phone connected to the s100u. I dont
know what to do.
Can someone please help me?
I used the sample configuration files from digium documentaion that was
supposed to be "sane" defaults for the kit.
Very similar to John Lange's post on Tue Oct 08 2002
Here
2004 May 28
1
* will not load, after latest CVS install
Greetings
I was getting bad static crackle on a phone, so I reload from the latest CVS and did
a make clean ; make install on zaptel, libpri and asterisk
Now I get this error
[chan_skinny.so] => (Skinny Client Control Protocol (Skinny))
May 28 13:59:42 WARNING[16384]: chan_skinny.c:2541 reload_config: Unable to get our IP address, Skinny disabled
Urgent handler
[chan_oss.so] => (OSS
2005 Aug 08
0
Configuring TDM40B and X100P
Hi,
I get the following message when I try to run Asterisk. This happened after I
changed some of the configuration files: extensions.conf, zaptel.conf and
zapata.conf. I have both TDM40B and X100P cards and am trying to use them
together. Please let me know if there is something else I should do.
Thnx, Gladys
[chan_local.so] => (Local Proxy Channel)
== Registered channel type
2005 Aug 16
0
What should my next steps in troubleshooting this TDM04B error be?
Hello
I have installed a TDM04B and disabled any devices not required in my PC.
(TDM04B is analog card with 4 ports to plug into telephone co lines). I am
running this version of *
Asterisk CVS-HEAD-01/10/05-02:11:15-AstLinux built by root@ls on a i686
running Linux
As you see below the wctdm module is loaded:
pbx root # lsmod
Module Size Used by
binfmt_misc 12296 1 - Live
2004 May 19
4
TDM400P problems with 1 FXS, 1 FXO
Hi-
I'm totally stumped configuring my TDM400P with one FXS and one FXO
module. Before I got the FXO module, I used to have an X101P, and
everything was working very well. Now * doesn't seem to recognize the
FXO channel. I've searched the wiki and the list archives. Stock Debian
3.0 stable installation. Any advice? Thanks.
-- David
Here's my configuration:
modprobe zaptel
2004 Apr 19
4
zaphfc
Hello list,
I'm trying to use zaphfc, the module loads ok, and it identifies the hfc
boards in the machine.
The problem is: whenever i try to ztcfg -vv I get the following:
8x-------------------
Zaptel Configuration
======================
SPAN 1: CCS/ AMI Build-out: 399-533 feet (DSX-1)
Channel map:
Channel 01: Individual Clear channel (Default) (Slaves: 01)
Channel 02: Individual
2004 Apr 29
2
e100p installation
Hi, I buyed a wildcard e100p and I installed that but when I load asterisk I
have this error:
Apr 29 18:59:25 WARNING[8192]: chan_zap.c:690 zt_open: Unable to open
'/dev/zap/channel': No such device
Apr 29 18:59:25 ERROR[8192]: chan_zap.c:5403 mkintf: Unable to open channel
1: No such device
here = 0, tmp->channel = 1, channel = 1
Apr 29 18:59:25 ERROR[8192]: chan_zap.c:7526
2005 Aug 15
1
bristuff-0.2.0-RC8n problems and kernel panic
Hi list!
On a newly installed RHEL 4 box I'm trying to install bristuff-0.2.0-RC8n.
Everything did compile but I am running into some problems with the zaphfc
driver.
First of all when I load zaphfc *before* zaptel (yes I know I shouldn't do
that) I get a kernel panic and the box hangs. Not so nice, especially when
you are trying to fix stuff from remote locations. But ok.
Now for
2004 Nov 23
7
Unable to open master device '/dev/zap/ctl'
I installed TDM400P and X100P pci cards in a system running mandrake 10.1
official, kernel 2.6.8.1-12mdksmp. I can compile zaptel, libpri, asterisk
and modprobe (zaptel, wcfxs, wcfxo) without errors. Except that running
ztcfg and asterisk fails.
[root@asterisk asterisk]# ztcfg
Notice: Configuration file is /etc/zaptel.conf
line 3: Unable to open master device '/dev/zap/ctl'
2004 May 13
1
TDM11B - 2nd channel is not detected
Hello all,
This is my first post to this mailing list. I've been following the
development (not as a developer, but as an interested user) of Asterisk
for over a year now. It's only in the last month that we've decided to
give it a try (hey, might as well...everything else we use is open
source).
We ordered a TDM11B (1 FXS, and 1 FXO). The card and Asterisk install
was uneventful.
2007 Apr 18
3
asterisk svn and zaptel
Hi all!!
I have downloaded the asterisk from svn checkout
http://svn.digium.com/svn/asterisk/trunk asterisk-trunk (is the asterisk 1.4
subversion). I also downloaded the patch for cellphone and make it work
fine. Then I bought the tdm11b board to have phone connection in my
computer.
I installed the hardware for zapte and the libpri modules in my Mandriva
2007 and the lights of the pci card
2005 Jun 14
0
ERROR[6504]: chan_zap.c:6710 mkintf: Channel 24 is reserved for D-channel.
Now I have this errors
When I lunch this command I got modprobe wcte11xp
This error:
Notice: Configuration file is /etc/zaptel.conf
line 0: Unable to open master device '/dev/zap/ctl'
1 error(s) detected
FATAL: Error running install command for wcte11xp
And when I lunch this command ztcfg -vv I got these:
Zaptel Configuration
======================
SPAN 1: CCS/HDB3 Build-out: 0 db
2005 Oct 10
2
TDM400 not working
Hi, all
I have installed TDM400 card. I can see it is there (lspci).
But Asterisk does not find it.
phonebox2*CLI> zap show status
No Zaptel interface found.
I assume that driver is not loaded, but I am sure I have installed it (I
compiled zaptel and then re-build asterisk and did make install for both
zaptel and asterisk).
When asterisk is started I get:
Jan 2 06:28:08 WARNING[3473]:
2006 Feb 19
3
Asterisk start errors with TDM2413E
I get the following errors when starting Asterisk.
== Parsing '/etc/asterisk/zapata.conf': Found
Feb 19 21:14:35 WARNING[10440]: chan_zap.c:920 zt_open: Unable to
specify channel 1: No such device
Feb 19 21:14:35 ERROR[10440]: chan_zap.c:6860 mkintf: Unable to open
channel 1: No such device
here = 0, tmp->channel = 1, channel = 1
Feb 19 21:14:35
2004 Apr 11
2
Booting error - Unable to specify channel 2: No such device
Hello All,
I am getting a set of errors when I boot Asterisk that I have not been able to
solve. What is causing these error(s)?
Asterisk boot output:
==============
Asterisk CVS-04/10/04-21:44:51, Copyright (C) 1999-2001 Linux Support
Services, Inc.
Written by Mark Spencer <markster@linux-support.net>
=========================================================================
[