Does anyone have instructions on updating the image on a Cisco 7960? I have tried the Cisco documentation. I've upgraded them before using call manager with out a problem, but I just can't seem to get them upgraded using a windows tftp server. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040928/530e3fae/attachment.htm
Henry Devito wrote:> > > Does anyone have instructions on updating the image on a Cisco 7960? I > have tried the Cisco documentation. I?ve upgraded them before using > call manager with out a problem, but I just can?t seem to get them > upgraded using a windows tftp server. >Henry, Make sure that you are doing it in increments. Like so: sccp 3.1 -> sip 6.1 -> sip 7.2 The Cisco docs are a little off for the 7.2 upgrade. This has been covered before, but here is a good post: http://lists.digium.com/pipermail/asterisk-users/2004-July/053758.html There were some better ones but I cannot find them now. Basically, when Cisco says use P003-07-2-00, use P0S3-07-2-00 in SIPDefault and OS79XX on your TFTP server. What does the phone do, and what do the logs for your TFTP server say? -- Kristian Kielhofner
Hello, While your doing this you will get annoyed. Don't reset the phone to factory defaults if your using poe. The pc port turns off and there is no way to turn it off in the menu's. In the archives, I read something about a windows tftp server not keeping the case of the files. This will break the upgrade. J _______________________________ Do you Yahoo!? Declare Yourself - Register online to vote today! http://vote.yahoo.com