Hi All, Here at my office we have two basic ISDN Access with two phone lines each. We would like to install an Asterisk PBX. The question is: How can I connect the ISDN lines to Asterisk? Is it possible to connect to a DIGIUM Wildcard TE410P card? Or this E1 card is only for PRI access? Any other suggested and tested hardware for a production box? Let me know, -Z -- ___________________________________________________________ Sign-up for Ads Free at Mail.com http://promo.mail.com/adsfreejump.htm
I dont know the card in question but pri ISDN cards and BRI cards are two very different things If you want to connect asterisk to an ISDN 2e interface then you are going to need a BRI card (you can get dual or quad interface cards) You will also need to find out from your telco how the ISDN 2 is presented - P2P or Point to multipoint? this makes a difference with your card purchase (active as opposed to passive) (or you could just request your telco to change the presentation to suit) I am no expert but have just gone through this process and only partially understood it. I am using the BT speedway card (Fritz) and its working like a dream..... Sam Zara Trousk <zaratrousk@mindless.com> wrote on 21/09/2004 14:01:13:> Hi All, > > Here at my office we have two basic ISDN Access with two phone lineseach.> We would like to install an Asterisk PBX. The question is: How can Iconnect> the ISDN lines to Asterisk? > Is it possible to connect to a DIGIUM Wildcard TE410P card? Or this E1card is> only for PRI access? Any other suggested and tested hardware for aproduction box?> > Let me know, > > -Z > -- > ___________________________________________________________ > Sign-up for Ads Free at Mail.com > http://promo.mail.com/adsfreejump.htm > > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users-------------- Winckworth Sherwood Solicitors and Parliamentary Agents DX 148400 WESTMINSTER 5 : 35 Great Peter Street, London SW1P 3LR Telephone 020 7593 5000 Fax 020 7593 5099 -Confidentiality- This email message and any attachments are confidential; they may be subject to legal professional privilege and are intended for the named recipient only. If you are not the named recipient, please return the message and enclosures immediately and delete them from your system. -Caution- Before advice received only by email (whether by attachment or otherwise) may be relied on, the authenticity of the communication must be verified by means independent of email. -Regulation- The firm is regulated by the Law Society. -Partners- A list of partners is available for inspection at each office of the firm and on the firm's website at http://www.winckworths.co.uk -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040921/d4ec4065/attachment.htm
Hi, I don't know much about the Wilcard TE410P but I surely know it won't work with a BRI Interface ... as you suppose it's only for PRI access. For a BRI Interface you can find several solutions, the cheapest would be to simply use a BRI (ISDN) Card but there are also some more special cards with Quad- or Octo- BRI Connectors available, all depending on your demand. For communication between * and your BRI cards you can use capi, misdn, i4l or bristuff (zaphfc) drivers depending on your card. I would suggest to use a card with a HFC - based chipset. These are cheap and work very well as far as I know. You will find further information about it at http://www.voip-info.org and several other websites. bye At 15:01 21.09.2004, you wrote:>Hi All, > >Here at my office we have two basic ISDN Access with two phone lines each. >We would like to install an Asterisk PBX. The question is: How can I >connect the ISDN lines to Asterisk? >Is it possible to connect to a DIGIUM Wildcard TE410P card? Or this E1 >card is only for PRI access? Any other suggested and tested hardware for a >production box? > >Let me know, > >-Z >-- >___________________________________________________________ >Sign-up for Ads Free at Mail.com >http://promo.mail.com/adsfreejump.htm > >_______________________________________________ >Asterisk-Users mailing list >Asterisk-Users@lists.digium.com >http://lists.digium.com/mailman/listinfo/asterisk-users >To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users