asterisk users - Sep 2004 - Nortel/Bell Canada Vista-350 ADSI

Hi Everyone,

I've been in contact with a few members off list about this, and I still 
can't figure out what to do
(aside from buying a more current ADSI compatibile screenphone).

The problem is that I have a Locked Nortel Vista-350 phone and I cannot 
update the ADSI scripts.

I have used the reset time/date trick, and then was able to partially 
upload the ADSI information
to the phone, but it still is not complete, and tells me that it's 
conflicting with the 'future' services.

This leads me to believe that I have an incorrect Security Code for the 
telephone. I realize that
Bell Canada will almost definately NOT give me the security code so I 
can use my phone properly. 

So herein lies my question, if I were to call a bell designated phone 
number for updating the services on
my telephone, (say, i-select services or whatever), would there be 
anyway to 'sniff' the connection
so I could figure out the security code on my own?

Does anyone have any other crazy ideas I can try to make this phone 
asterisk compatible?

I have tried the following security codes after scouring the net for 
almost 10 hours straight (yes i'm that determined to make this phone work):

;SECURITY "_AST"                       ; Security code hangs right up
on me
;SECURITY 0x9BDBF7AC            ; Security code hangs right up on me
;SECURITY 0x201718B7               ; sorta works (doesn't hang up on me)
;SECURITY 0x85EFD9DA             ; sorta works (doesn't hang up on me)
;SECURITY 0x78921D49               ; sorta works (doesnt hang up on me)


TIA,
Matt

On Monday 20 September 2004 16:35, Matt G wrote:
> This leads me to believe that I have an incorrect Security Code for the
> telephone. I realize that
> Bell Canada will almost definately NOT give me the security code so I
> can use my phone properly.
You did the time/date hack and totally reset the unit?  IIRC there were 
several "levels" of reset.  You might also want to try opening up the
unit
and pulling the battery out to completely drain any NVRAM.  

Perhaps I was just lucky but I had no trouble clearing out my PT390 and also 
490, and I know for certain that the 490 was locked.  I can use slot 2 (the 
auto-starting one).

My adsi.conf:

DESCRIPTION "Asterisk PBX"              ; Name of vendor
VERSION 0x02                            ; Version of stuff
SECURITY 0x0000                         ; Security code
FDN 0x0000000f                          ; Descriptor number

-A.