search for: dchan

Hi all, Does somebody know how I have to setup my TE405P ? Is it correct my configuration below ? Otherwise, can somebody help me ? Thanks, Angel. zaptel.conf span=1,1,0,ccs,hdb3 span=2,0,1,ccs,hdb3 span=3,0,1,ccs,hdb3 span=4,0,1,ccs,hdb3 bchan=1-15 dchan=16 bchan=17-31 bchan=1-15 dchan=16 bchan=17-31 bchan=1-15 dchan=16 bchan=17-31 bchan=1-15 dchan=16 bchan=17-31 zapata.conf [channels] context=default switchtype=euroisdn pridialplan=unknown signalling=pri_cpe usecallerid=yes hidecalleri...

...= 1 TE_CLOCK = NORMAL TE_REF_CLOCK = 0 TE_SIG_MODE = CCS TE_HIGHIMPEDANCE = NO TE_RX_SLEVEL = 430 LBO = 120OH FE_TXTRISTATE = NO MTU = 1500 UDPPORT = 9000 TTL = 255 IGNORE_FRONT_END = NO TDMV_SPAN = 1 TDMV_DCHAN = 0 TDMV_HW_DTMF = NO # YES: receive dtmf events from hardware TDMV_HW_FAX_DETECT = NO # YES: receive fax 1100hz events from hardware [w1g1] ACTIVE_CH = ALL TDMV_HWEC = YES MTU = 8 /etc/dahdi/system.conf: defaultzone=be lo...

...For a secondary, use "2", and so on. # To not use this as a sync source, just use "0" # loadzone=it defaultzone=it span=1,1,3,ccs,ami span=2,0,3,ccs,ami span=3,0,3,ccs,ami span=4,0,3,ccs,ami span=5,0,3,ccs,ami span=6,0,3,ccs,ami span=7,0,3,ccs,ami span=8,0,3,ccs,ami bchan=1,2 dchan=3 bchan=4,5 dchan=6 bchan=7,8 dchan=9 bchan=10,11 dchan=12 bchan=13,14 dchan=15 bchan=16,17 dchan=18 bchan=19,20 dchan=21 bchan=22,23 dchan=24 I get this on bri intense debug... > Unnumbered frame: > SAPI: 63 C/R: 0 EA: 0 > TEI: 127 EA: 1 > M3: 0 P/F: 0 M2: 0 11: 3 [ U...

...persistent on the same span. Anyone ever run into a Problem like this aswell? I haven't found any solution so far so i ask here. asterisk/zaptel/libpri are all lates stable out of the 1.2 branch and these are the related configs: /etc/zaptel.conf: span=1,1,0,ccs,hdb3,crc4 bchan=1-15,17-31 dchan=16 span=2,0,0,ccs,hdb3,crc4 bchan=32-46,48-62 dchan=47 span=3,0,0,ccs,hdb3,crc4 bchan=63-77,79-93 dchan=78 span=4,0,0,ccs,hdb3,crc4 bchan=94-108,110-124 dchan=109 span=5,0,0,ccs,hdb3,crc4 bchan=125-139,141-155 dchan=140 span=6,0,0,ccs,hdb3,crc4 bchan=156-170,172-186 dchan=171 span=7,0,0,ccs,h...

...l on what would cause this? I tried the latest Zaptel and then a older version to, same issue. Here is what the config files look like, any help would be great on this, ive Googled and can't seem to find what else to try! zaptel.conf loadzone=us defaultzone=us span=1,1,0,esf,b8zs bchan=1-23 dchan=24 span=2,1,0,esf,b8zs bchan=25-47 dchan=48 span=3,1,0,esf,b8zs bchan=49-72 #dchan=72 span=4,1,0,esf,b8zs bchan=73-96 #dchan=96 span=5,1,0,esf,b8zs bchan=97-120 #dchan=120 span=6,1,0,esf,b8zs bchan=121-144 #dchan=144 zapata.conf [trunkgroups] trunkgroup => 1,24,48 spanmap => 1,1,0 spanm...

How i can log to understand where is my problem Sometimes zaphfc hang my nt1 plus with that error zaphfc: empty HDLC frame received. zaphfc: dchan tx fifo total number of frames exceeded! zaphfc: dchan tx fifo total number of frames exceeded! zaphfc: dchan tx fifo total number of frames exceeded! zaphfc: dchan tx fifo total number of frames exceeded! zaphfc: dchan tx fifo total number of frames exceeded! zaphfc: empty HDLC frame received and...

...rror on my PRI line which connects my asterisk server to a Norstar 0x32 key system. The asterisk zaptel.conf file was configure as follows and this config worked for 6 months until friday. Nothing was changed on either system prior to friday. here is teh zaptel.conf span=1,0,0,esf,b8zs bchan=1-23 dchan=24 span=2,0,0,esf,b8zs bchan=25-47 dchan=48 To try to fix the problem i changed the timing on span 2 from 0 to 1 span=1,0,0,esf,b8zs bchan=1-23 dchan=24 span=2,1,0,esf,b8zs bchan=25-47 dchan=48 However i still get the same error. Please help we cannot connect call form my norstar to asterisk w/...

...n 2). I can get one working, but not the other. However, if I use vpmsupport=0 when loading the wct4xxp module, they both work. But here is the problem, vpmsupport=0 disables the on board echo cancellation. Any ideas? BTW, here is zaptel.conf span=1,1,0,esf,b8zs span=2,2,0,esf,b8zs bchan=1-23 dchan=24 bchan=25-47 dchan=48 loadzone=us defaultzone=us

...----------- loadzone=fr defaultzone=fr # qozap span definitions # most of the values should be bogus because we are not really zaptel span=1,1,3,ccs,ami span=2,0,3,ccs,ami span=3,0,3,ccs,ami span=4,0,3,ccs,ami span=5,1,3,ccs,ami span=6,0,3,ccs,ami span=7,0,3,ccs,ami span=8,0,3,ccs,ami bchan=1,2 dchan=3 bchan=4,5 dchan=6 bchan=7,8 dchan=9 bchan=10,11 dchan=12 bchan=13,14 dchan=15 bchan=16,17 dchan=18 bchan=19,20 dchan=21 bchan=22,23 dchan=24 ----------- zapata.conf ----------- switchtype = euroisdn pridialplan = dynamic prilocaldialplan = local nationalprefix = 0 internationalprefix = 00 use...

We have install a DS3 with 28 DS1's we have an Adtran MUX breaking out the DS1's, we are trying to setup the system with 2 dchannels for each 4 DS1's. Everything looks fine when modprobe zaptel and wct4xxp and ztcfg -vvvvvv but when I asterisk asterisk it says: Aug 10 16:33:32 ERROR[8954]: chan_zap.c:6750 mkintf: Channel 24 is reserved for D-channel. Aug 10 16:33:32 ERROR[8954]: chan_zap.c:9990 setup_zap: Unable to...

...e second one with 30 channels. When I try to load zaptel modules, I get an error message: "Loading zaptel framework: Loading zaptel hardware modules: wct1xxp wcusb Running ztcfg: ZT_CHANCONFIG failed on channel 63: No such device" Follows my zaptel.conf: span=1,0,0,ccs,hdb3 bchan=1-15 dchan=16 span=2,0,0,ccs,hdb3 bchan=33-47,49-63 dchan=48,64 Any clue? Daniel

...duction. Once I have the machine up I will gladly share my experience on using * in heavy-load enviroment. Thanks for your help Christian My /etc/zaptel.conf looks like this: span=1,1,0,ccs,hdb3,crc4 span=2,0,0,ccs,hdb3,crc4 span=3,0,0,ccs,hdb3,crc4 span=4,0,0,ccs,hdb3,crc4 bchan=1-15,17-31 dchan=16 bchan=32-46,48-62 dchan=47 bchan=63-77,79-93 dchan=78 bchan=94-108,110-124 dchan=109 loadzone = nl defaultzone=nl My carrier told me to use CAS signalling but then I get dchan up/dchan down messages every second and nothng works. When I use CCS inbound/outbound calls work fine. Mybe my carri...

...utogenerated by /usr/sbin/zapconf on Wed Feb 20 10:13:17 2013 -- do not hand edit # Zaptel Configuration File # # This file is parsed by the Zaptel Configurator, ztcfg # # Span 1: TE4/0/1 "T4XXP (PCI) Card 0 Span 1" (MASTER) HDB3/CCS RED span=1,1,0,ccs,hdb3 # termtype: te bchan=1-15,17-31 dchan=16 # Span 2: TE4/0/2 "T4XXP (PCI) Card 0 Span 2" HDB3/CCS RED span=2,2,0,ccs,hdb3 # termtype: te bchan=32-46,48-62 dchan=47 # Span 3: TE4/0/3 "T4XXP (PCI) Card 0 Span 3" # span=3,3,0,ccs,hdb3 # termtype: te # bchan=63-77,79-93 # dchan=78 # Span 4: TE4/0/4 "T4XXP (PCI) Ca...

...the last B-channel at 127 where it was actually at 124 (my first time with E1s). As telcom lingo goes I have seen this 32nd channel referred to as "time slot 0" and as "framing channel" and expect there to be other names as well. As an example, the current method: bchan=1-15 dchan=16 bchan=17-31 ... bchan=32-46 dchan=47 bchan=48-62 ... bchan=63-77 dchan=78 bchan=79-93 ... bchan=94-108 dchan=109 bchan=110-124 and an example of my first thoughts: bchan=1-15 dchan=16 bchan=17-31 uchan=32 ... bchan=33-47 dchan=48 bchan=49-63 uchan=64 ... bchan=65-79 dchan=80 bchan=81-95 uchan=...

...hurry I might add ;) (had no time to play with configurations) and restarted *, then everything was ok again ... Should I comment out span 2 and 4, run a ztcfg, unplug the cables in 2 and 4, and then turn off the meridian ? Julian. /* zaptel.conf */ span=1,1,0,ccs,hdb3,crc4 bchan=1-15,17-31 dchan=16 span=2,0,0,ccs,hdb3,crc4 bchan=32-46,48-62 dchan=47 span=3,2,0,ccs,hdb3,crc4 bchan=63-77,79-93 dchan=78 span=4,0,0,ccs,hdb3,crc4 bchan=94-108,110-124 dchan=109 loadzone=uk defaultzone=uk

.... Here is the latter configuration: ZAPTEL.CONF (excerpt): # qozap span definitions # most of the values should be bogus because we are not really zaptel span=1,1,3,ccs,ami span=2,0,3,ccs,ami span=3,0,3,ccs,ami span=4,0,3,ccs,ami # E1 definition: span=5,0,0,ccs,hdb3,crc4 #BRI's: bchan=1,2 dchan=3 bchan=4,5 dchan=6 bchan=7,8 dchan=9 bchan=10,11 dchan=12 #E1: bchan=13-27,29-43 dchan=28 --------------------------------------- ZAPATA.CONF (excerpt) switchtype = euroisdn ; p2mp TE mode (for connecting ISDN lines in point-to-multipoint mode) signalling = bri_cpe_ptmp ; define 4 BRI's:...

...l pridialplan=unknown group=1 channel=>1-15 channel=>17-31 group = 2 channel => 32-46 channel => 48-62 group = 3 channel => 63-77 channel => 79-93 group = 4 channel => 94-108 channel => 110-124 ------------------------ zaptel.conf span=1,1,0,ccs,hdb3,crc4 bchan=1-15 dchan=16 bchan=17-31 span=2,1,0,ccs,hdb3,crc4 bchan=32-46 dchan=47 bchan=48-62 span=3,1,0,ccs,hdb3,crc4 bchan=63-77 dchan=78 bchan=79-93 span=4,1,0,ccs,hdb3,crc4 bchan=94-108 dchan=109 bchan=110-124 -------------------------- extensions.conf [default] include => from-sip [from-sip] exten => 2001,...

...know what I do wrong? To be complete These are the configuration files: [zaptel.conf] loadzone=nl defaultzone=nl # qozap span definitions # most of the values should be bogus because we are not really zaptel span=1,1,3,ccs,ami span=2,0,3,ccs,ami span=3,0,3,ccs,ami span=4,0,3,ccs,ami bchan=1,2 dchan=3 bchan=4,5 dchan=6 bchan=7,8 dchan=9 bchan=10,11 dchan=12 [zapatel.conf] [channels] ; ; ISDN quadBRI interfaces ; switchtype = euroisdn signalling = bri_cpe_ptmp pridialplan = local group = 1 context=to-pstn channel => 1-2 switchtype = euroisdn signalling = bri_cpe_ptmp pridialplan = loc...

...96 channels. The question is how do i get the zaptel module to recognize the card as Quad E1 and not Quad T1. My current /etc/zaptel.conf goes as follows: ----------------------- span=1,0,0,ccs,hdb3,crc4 span=2,0,0,ccs,hdb3,crc4 span=3,0,0,ccs,hdb3,crc4 span=4,0,0,ccs,hdb3,crc4 bchan=1-15,17-31 dchan=16 bchan=32-46,48-62 dchan=47 bchan=63-77,79-93 dchan=78 bchan=94-108,110-124 dchan=109 loadzone = us defaultzone = us ----------EOF------- Thanks, Rahul -- Rahul Arvind Jadhav Sr. Software Engineer (VoIP) NetYantra India Pvt. Ltd --------------------------

...,1,Dial(ZAP/g1/${EXTEN:1},30,t) [isdn-ingresso] exten =>27380773,1,Dial(SIP/116,20,t) exten => s,1,Answer exten => s,2,Playback(pbx-invalid) exten => s,3,Hangup zapata.conf: loadzone=nl defaultzone=nl span=1,1,3,ccs,ami span=2,0,3,ccs,ami span=3,0,3,ccs,ami span=4,0,3,ccs,ami bchan=1,2 dchan=3 bchan=4,5 dchan=6 bchan=7,8 dchan=9 bchan=10,11 dchan=12 zaptel.conf: switchtype = euroisdn echocancel=yes echocancelwhenbridged=yes echotraining=yes rxgain=8.2 txgain=-1.0 signalling = bri_cpe_ptmp pridialplan = local prilocaldialplan = local switchtype = euroisdn signalling = bri_cpe_ptmp p...