Hi, I'm having trouble configuring and E1 link , I know the E1 is a PRI and the switchtype is 5ess. The problem is that everytime I try to dial I got and error saying that it was unable to open the zap channel . Devices are created in the /dev/zap directory and I can open them with a cat /dev/zap/1. I can also see the channels in /proc/zaptel/1. Thanks in advance [zaptel.conf] span=1,1,0,cas,ami bchan=1-15,17-31 dchan=16 loadzone = us defaultzone=us [zapata.conf] trunkgroup => 1,16 spanmap => 1,1 [channels] switchtype=5ess context = default signalling = pri_cpe group = 1 channel => 1-15,17-31 cat /proc/zaptel/1 Span 1: WCT1/0 "Digium Wildcard E100P E1/PRA Card 0" AMI/ RED 1 WCT1/0/1 Clear 2 WCT1/0/2 Clear 3 WCT1/0/3 Clear 4 WCT1/0/4 Clear 5 WCT1/0/5 Clear 6 WCT1/0/6 Clear 7 WCT1/0/7 Clear 8 WCT1/0/8 Clear 9 WCT1/0/9 Clear 10 WCT1/0/10 Clear 11 WCT1/0/11 Clear 12 WCT1/0/12 Clear 13 WCT1/0/13 Clear 14 WCT1/0/14 Clear 15 WCT1/0/15 Clear 16 WCT1/0/16 HDLCFCS 17 WCT1/0/17 Clear 18 WCT1/0/18 Clear 19 WCT1/0/19 Clear 20 WCT1/0/20 Clear 21 WCT1/0/21 Clear 22 WCT1/0/22 Clear 23 WCT1/0/23 Clear 24 WCT1/0/24 Clear 25 WCT1/0/25 Clear 26 WCT1/0/26 Clear 27 WCT1/0/27 Clear 28 WCT1/0/28 Clear 29 WCT1/0/29 Clear 30 WCT1/0/30 Clear 31 WCT1/0/31 Clear
Marcelo Rodriguez wrote:> Hi, > I'm having trouble configuring and E1 link , I know the E1 is a PRI > and the switchtype is 5ess. The problem is that everytime I try to dial > I got and error saying that it was unable to open the zap channel . > Devices are created in the /dev/zap directory and I can open them with a > cat /dev/zap/1. I can also see the channels in /proc/zaptel/1.> cat /proc/zaptel/1 > Span 1: WCT1/0 "Digium Wildcard E100P E1/PRA Card 0" AMI/ REDYou've got a red alarm - looks like there's a connection problem somewhere. -- Jon Stockill lists@stockill.net
Hi everyone, I'm having some problem trying to set up an IAX connection between two * servers. The scenario is : serverA has an X100p card and will direct all calls from the X100p over IAX to a specific extension on serverB which is at the other end of an unfirewalled VPN connection. At the moment serverA tries to redirect the call to serverB but recieves this message (it appears on both servers) : -- Executing Dial("Zap/1-1", "IAX2/test:test@192.168.1.250/cardiff") in new stack -- Called test:test@192.168.1.250/cardiff Tx-Frame Retry[000] -- OSeqno: 000 ISeqno: 000 Type: IAX Subclass: NEW Timestamp: 00006ms SCall: 00001 DCall: 00000 [192.168.1.250:4569] VERSION : 2 CALLED NUMBER : cardiff LANGUAGE : en USERNAME : test FORMAT : 2 CAPABILITY : 65283 ADSICPE : 2 DATE TIME : 151287361 Rx-Frame Retry[No] -- OSeqno: 000 ISeqno: 001 Type: IAX Subclass: REJECT Timestamp: 00001ms SCall: 00001 DCall: 00001 [192.168.1.250:4569] CAUSE : No authority found Aug 4 14:50:02 WARNING[147465]: chan_iax2.c:5339 socket_read: Call rejected by 192.168.1.250: No authority found Tx-Frame Retry[-01] -- OSeqno: 001 ISeqno: 001 Type: IAX Subclass: ACK Timestamp: 00001ms SCall: 00001 DCall: 00001 [192.168.1.250:4569] -- Hungup 'IAX2/192.168.1.250:4569/1' == No one is available to answer at this time Here are excerpts from the config files : ServerA: extensions.conf [incoming] exten => s,1,Dial(IAX2/test:test@192.168.1.250/cardiff) ServerB: iax.conf [cardiff] type=friend username=test secret=test context=sipfonescard extensions.conf [sipfonescard] exten => cardiff,1,Dial(SIP/1101) Has anyone got any suggestions on what might be the solution to the 'no authority found' problem, I'm convinced that it must be something pretty simple that I'm missing but I can't find any tips to point me in the right direction. Any suggestions would be appreciated, Thanks, Simon Ward
In zaptel.conf, I think the line should be: span=1,1,0,ccs,hdb3 With an optional ",crc4" at the end. This works for my E1 card. The code you're using sounds like for a T1. Regards Scott M. Stingel President, Emerging Voice Technology, Inc. Palo Alto California & London England www.evtmedia.com -----Original Message----- From: asterisk-users-admin@lists.digium.com [mailto:asterisk-users-admin@lists.digium.com] On Behalf Of Marcelo Rodriguez Sent: Wednesday, August 04, 2004 6:47 AM To: asterisk-users@lists.digium.com Subject: [Asterisk-Users] Problems with E100P Hi, I'm having trouble configuring and E1 link , I know the E1 is a PRI and the switchtype is 5ess. The problem is that everytime I try to dial I got and error saying that it was unable to open the zap channel . Devices are created in the /dev/zap directory and I can open them with a cat /dev/zap/1. I can also see the channels in /proc/zaptel/1. Thanks in advance [zaptel.conf] span=1,1,0,cas,ami bchan=1-15,17-31 dchan=16 loadzone = us defaultzone=us [zapata.conf] trunkgroup => 1,16 spanmap => 1,1 [channels] switchtype=5ess context = default signalling = pri_cpe group = 1 channel => 1-15,17-31 cat /proc/zaptel/1 Span 1: WCT1/0 "Digium Wildcard E100P E1/PRA Card 0" AMI/ RED 1 WCT1/0/1 Clear 2 WCT1/0/2 Clear 3 WCT1/0/3 Clear 4 WCT1/0/4 Clear 5 WCT1/0/5 Clear 6 WCT1/0/6 Clear 7 WCT1/0/7 Clear 8 WCT1/0/8 Clear 9 WCT1/0/9 Clear 10 WCT1/0/10 Clear 11 WCT1/0/11 Clear 12 WCT1/0/12 Clear 13 WCT1/0/13 Clear 14 WCT1/0/14 Clear 15 WCT1/0/15 Clear 16 WCT1/0/16 HDLCFCS 17 WCT1/0/17 Clear 18 WCT1/0/18 Clear 19 WCT1/0/19 Clear 20 WCT1/0/20 Clear 21 WCT1/0/21 Clear 22 WCT1/0/22 Clear 23 WCT1/0/23 Clear 24 WCT1/0/24 Clear 25 WCT1/0/25 Clear 26 WCT1/0/26 Clear 27 WCT1/0/27 Clear 28 WCT1/0/28 Clear 29 WCT1/0/29 Clear 30 WCT1/0/30 Clear 31 WCT1/0/31 Clear _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Well I turn on the pri intense debuging and the only message that I could find was this: [ 00 01 7f ] Unnumbered frame: SAPI: 00 C/R: 0 EA: 0 TEI: 000 EA: 1 M3: 3 P/F: 1 M2: 3 11: 3 [ SABME (set asynchronous balanced mode extended) ] 0 bytes of data Sending Set Asynchronous Balanced Mode Extended Also Scott was right I was using the wrong setting , changes the zaptel.conf file with this span=1,1,0.ccs,hdb3 the /proc/zaptel/1 now shows this : Span 1: WCT1/0 "Digium Wildcard E100P E1/PRA Card 0" HDB3/CCS ClockSource But I can't still get the Zap channel to dial , any other thoughts? Thanks in advance Marcelo Rodriguez On Wed, 2004-08-04 at 09:58, Horacio J. Pe?a wrote:> > Well as you sugested I changed to ccs, hdb3 and nothing happen. Well the > > message on /proc/zaptel/1 changes to > > Span 1: WCT1/0 "Digium Wildcard E100P E1/PRA Card 0" HDB3/CCS YELLOW > > ClockSource > > But at the end when I try to dial I still have the same errors > > > Any thoughts? > > I'm very new to asterisk, so take my words with a grain of salt. > > First, you should ask your provider what signalling type you should use (ami/hdb3, > cas/ccs, crc4/nocrc) Then configure that on zaptel.conf > > On asterisk, "pri intense debug span 1" will let you see anything that is > happening over the E1. > > > Saludos>! > > Saludos? Si hablas castellano no nos gastemos en usar ingles :-) > > > Aug 4 09:40:51 DEBUG[1217602880]: pbx.c:1255 pbx_extension_helper: > > Launching 'Dial' > > Aug 4 09:40:51 DEBUG[1217602880]: chan_zap.c:6535 zt_request: Using > > channel 1 > > Aug 4 09:40:51 DEBUG[1217602880]: chan_zap.c:6535 zt_request: Using > > channel 2 > > Aug 4 09:40:51 DEBUG[1217602880]: chan_zap.c:6535 zt_request: Using > > channel 3 > > Aug 4 09:40:51 DEBUG[1217602880]: chan_zap.c:6535 zt_request: Using > > channel 4 > > Aug 4 09:40:51 DEBUG[1217602880]: chan_zap.c:6535 zt_request: Using > > channel 5 > > Aug 4 09:40:51 DEBUG[1217602880]: chan_zap.c:6535 zt_request: Using > > channel 6 > > Aug 4 09:40:51 DEBUG[1217602880]: chan_zap.c:6535 zt_request: Using > > channel 7 > > Aug 4 09:40:51 DEBUG[1217602880]: chan_zap.c:6535 zt_request: Using > > channel 8 > > Aug 4 09:40:51 DEBUG[1217602880]: chan_zap.c:6535 zt_request: Using > > channel 9 > > Aug 4 09:40:51 DEBUG[1217602880]: chan_zap.c:6535 zt_request: Using > > channel 10 > > Aug 4 09:40:51 DEBUG[1217602880]: chan_zap.c:6535 zt_request: Using > > channel 11 > > Aug 4 09:40:51 DEBUG[1217602880]: chan_zap.c:6535 zt_request: Using > > channel 12 > > Aug 4 09:40:51 DEBUG[1217602880]: chan_zap.c:6535 zt_request: Using > > channel 13 > > Aug 4 09:40:51 DEBUG[1217602880]: chan_zap.c:6535 zt_request: Using > > channel 14 > > Aug 4 09:40:51 DEBUG[1217602880]: chan_zap.c:6535 zt_request: Using > > channel 15 > > Aug 4 09:40:51 DEBUG[1217602880]: chan_zap.c:6535 zt_request: Using > > channel 17 > > Aug 4 09:40:51 DEBUG[1217602880]: chan_zap.c:6535 zt_request: Using > > channel 18 > > Aug 4 09:40:51 DEBUG[1217602880]: chan_zap.c:6535 zt_request: Using > > channel 19 > > Aug 4 09:40:51 DEBUG[1217602880]: chan_zap.c:6535 zt_request: Using > > channel 20 > > Aug 4 09:40:51 DEBUG[1217602880]: chan_zap.c:6535 zt_request: Using > > channel 21 > > Aug 4 09:40:51 DEBUG[1217602880]: chan_zap.c:6535 zt_request: Using > > channel 22 > > Aug 4 09:40:51 DEBUG[1217602880]: chan_zap.c:6535 zt_request: Using > > channel 23 > > Aug 4 09:40:51 DEBUG[1217602880]: chan_zap.c:6535 zt_request: Using > > channel 24 > > Aug 4 09:40:51 DEBUG[1217602880]: chan_zap.c:6535 zt_request: Using > > channel 25 > > Aug 4 09:40:51 DEBUG[1217602880]: chan_zap.c:6535 zt_request: Using > > channel 26 > > Aug 4 09:40:51 DEBUG[1217602880]: chan_zap.c:6535 zt_request: Using > > channel 27 > > Aug 4 09:40:51 DEBUG[1217602880]: chan_zap.c:6535 zt_request: Using > > channel 28 > > Aug 4 09:40:51 DEBUG[1217602880]: chan_zap.c:6535 zt_request: Using > > channel 29 > > Aug 4 09:40:51 DEBUG[1217602880]: chan_zap.c:6535 zt_request: Using > > channel 30 > > Aug 4 09:40:51 DEBUG[1217602880]: chan_zap.c:6535 zt_request: Using > > channel 31 > > Aug 4 09:40:51 NOTICE[1217602880]: app_dial.c:714 dial_exec: Unable to > > create channel of type 'Zap' > > == Everyone is busy/congested at this time > > Aug 4 09:40:51 DEBUG[1217602880]: app_dial.c:974 dial_exec: Exiting > > with DIALSTATUS=CHANUNAVAIL. > > > > > > > > > > > > On Wed, 2004-08-04 at 09:28, Horacio J. Pe?a wrote: > > > > [zaptel.conf] > > > > span=1,1,0,cas,ami > > > > > > Are you sure that "cas,ami" is correct? I'm using "ccs,hdb3" > > > > > > Saludos, > > > HoraPe > > > --- > > > Horacio J. Pe?a > > > horape@compendium.com.ar > > > horape@uninet.edu