I've put a t100p in our * server and I'm having trouble configuring
it. It is directly connected to an Adtran TA 750 channel bank with two
FXO cards (8 analog incoming lines total). I'm able to insmod and
modprobe both zaptel and wct1xxp with no trouble, but when I start *
with /usb/sbin/asterisk -c I get the following output:
[root@rosella root]# /usr/sbin/asterisk -c
Asterisk CVS-HEAD-05/28/04-08:04:00, Copyright (C) 1999-2004 Digium.
Written by Mark Spencer <markster@digium.com
<mailto:markster@digium.com>>
========================================================================[
Booting............ -- SIP Seeding 'phone1' at
phone1@192.168.0.158:5060 for 3600
-- SIP Seeding 'phone2' at phone2@192.168.0.176:5060 for 3600
-- SIP Seeding 'phone3' at phone3@192.168.0.167:5060 for 3600
.......Jun 29 11:56:33 WARNING[-1084538752]: chan_skinny.c:2541
reload_config: Unable to get our IP address, Skinny disabled
..Jun 29 11:56:33 WARNING[-1084538752]: chan_zap.c:704 zt_open: Unable
to specify channel 1: No such device or address
Jun 29 11:56:33 ERROR[-1084538752]: chan_zap.c:5499 mkintf: Unable to
open channel 1: No such device or address
here = 0, tmp->channel = 1, channel = 1
Jun 29 11:56:33 ERROR[-1084538752]: chan_zap.c:7652 setup_zap: Unable
to register channel '1-24'
Jun 29 11:56:33 WARNING[-1084538752]: loader.c:326 ast_load_resource:
chan_zap.so: load_module failed, returning -1
Segmentation fault
I followed the instructions from
digium.com/downloads/hw_article
<digium.com/downloads/hw_article>, so I'm unsure what to do
next. My configs:
[root@rosella root]# cat /etc/asterisk/zaptel.conf
span=1,0,0,esf,b8zs
fxoks=1-24
[root@rosella root]# cat /etc/asterisk/zapata.conf
[channels]
signalling=fxo_ls
context=default
group=1
channel => 1-24
[root@rosella root]#
=======================I'm really excited to get this system going, so any
advice anyone
could offer would be very much appreciated.
-paul
--
Paul Concepcion
HelpCan Computer Technical Services, Inc.