Robinson Tim-W10277
2004-Jun-07 04:58 UTC
[Asterisk-Users] Zaphfc and BRI problems in Portugal...
Hi - Anyone using zaphfc cards (bri-stuff-0.0.2) on a Portugal Telecom BRI service? I am getting loads of errors and the audio is very distorted all the time. System is a Dell PIII/933 MHZ with SCSI. Here in the UK we have perfect audio with a Compaq PIII/500 MHZ SCSI system. Files are identical in both systems as below: Is there anything magic about Portuguese ISDN? The PCI bus in the Portuguese system does seem to be sharing interrupts but I am not convinced this is the cause of the problem, as zttool reports no missed interrupts, and looking at /proc/interrupts seems to indicate approx 8000 per second. [Zaptel.conf] span=1,1,3,ccs,ami bchan=1-2 dchan=3 [zapata.conf] switchtype = euroisdn signalling = bri_cpe nationalprefix=0 internationalprefix=00 pridialplan=unknown echocancel=yes overlapdial=no ;callprogress=yes immediate=no group = 1 context=inboundpstn channel => 1-2 Jun 7 12:29:50 localhost kernel: zaphfc: bchan rx fifo not enough bytes to receive! (z1=7719, z2=7712) Jun 7 12:29:50 localhost kernel: zaphfc: bchan rx fifo not enough bytes to receive! (z1=8072, z2=8065) Jun 7 12:29:50 localhost kernel: zaphfc: bchan rx fifo not enough bytes to receive! (z1=1253, z2=1246) Jun 7 12:38:57 localhost kernel: zaphfc: bchan rx fifo not enough bytes to receive! (z1=8142, z2=8135) Help! Rgds Tim Robinson -----Original Message----- From: asterisk-users-admin@lists.digium.com [mailto:asterisk-users-admin@lists.digium.com] On Behalf Of Julian Pawlowski Sent: 07 June 2004 11:10 To: asterisk-users@lists.digium.com Subject: [Asterisk-Users] Updated: Advanced German Configuration Hi Folks, just updated my current Dialplan available on http://capi4linux.thepenguin.de/download/asterisk/config/ It now heavily uses ODBC database (MySQL) to hold most of the data like extensions and incoming connection numbers. An example databasefile is also included. The denylist has also been updated for future and current settings of the german telecom regulator. Again I added many comfortable features (vertical service codes). The following features are supported to be dialed from phone until now: - language setting - follow me - Call Forward Unconditional - Call Forward on No Answer - Call Forward on Busy - Individual Speed Dialing - Break Call Forward - Phone Lock - Redial last called external number - Reset Phone Settings There are much more features. You will notice them by reading the dialplan yourself. It is fairly good commented so gifted people won't have any problems. Comments and proposals appreciated. Regards, Julian Pawlowski ________________________________________________________________ Verschicken Sie romantische, coole und witzige Bilder per SMS! Jetzt neu bei WEB.DE FreeMail: http://freemail.web.de/?mc=021193 _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Flávio Eduardo de Andrade Gonçalves
2004-Jun-10 03:08 UTC
[Asterisk-Users] Zaphfc and BRI problems in Portugal...
I have configured several ISDN cards in Brazil in Cisco Routers. There is a configuration called compand-type (ulaw alaw) (Cisco). They are different between US and Brazil. The sound is very distorted when in the wrong configuration. The difference is between 56 bit and 64 bit ISDN. Maybe that s your problem between Portugal and England. I hope it helps. best regards, Fl?vio Gon?alves>>> Tim.Robinson@motorola.com 06/07 8:58 am >>>Hi - Anyone using zaphfc cards (bri-stuff-0.0.2) on a Portugal Telecom BRI service? I am getting loads of errors and the audio is very distorted all the time. System is a Dell PIII/933 MHZ with SCSI. Here in the UK we have perfect audio with a Compaq PIII/500 MHZ SCSI system. Files are identical in both systems as below: Is there anything magic about Portuguese ISDN? The PCI bus in the Portuguese system does seem to be sharing interrupts but I am not convinced this is the cause of the problem, as zttool reports no missed interrupts, and looking at /proc/interrupts seems to indicate approx 8000 per second. [Zaptel.conf] span=1,1,3,ccs,ami bchan=1-2 dchan=3 [zapata.conf] switchtype = euroisdn signalling = bri_cpe nationalprefix=0 internationalprefix=00 pridialplan=unknown echocancel=yes overlapdial=no ;callprogress=yes immediate=no group = 1 context=inboundpstn channel => 1-2 Jun 7 12:29:50 localhost kernel: zaphfc: bchan rx fifo not enough bytes to receive! (z1=7719, z2=7712) Jun 7 12:29:50 localhost kernel: zaphfc: bchan rx fifo not enough bytes to receive! (z1=8072, z2=8065) Jun 7 12:29:50 localhost kernel: zaphfc: bchan rx fifo not enough bytes to receive! (z1=1253, z2=1246) Jun 7 12:38:57 localhost kernel: zaphfc: bchan rx fifo not enough bytes to receive! (z1=8142, z2=8135) Help! Rgds Tim Robinson -----Original Message----- From: asterisk-users-admin@lists.digium.com [mailto:asterisk-users-admin@lists.digium.com] On Behalf Of Julian Pawlowski Sent: 07 June 2004 11:10 To: asterisk-users@lists.digium.com Subject: [Asterisk-Users] Updated: Advanced German Configuration Hi Folks, just updated my current Dialplan available on http://capi4linux.thepenguin.de/download/asterisk/config/ It now heavily uses ODBC database (MySQL) to hold most of the data like extensions and incoming connection numbers. An example databasefile is also included. The denylist has also been updated for future and current settings of the german telecom regulator. Again I added many comfortable features (vertical service codes). The following features are supported to be dialed from phone until now: - language setting - follow me - Call Forward Unconditional - Call Forward on No Answer - Call Forward on Busy - Individual Speed Dialing - Break Call Forward - Phone Lock - Redial last called external number - Reset Phone Settings There are much more features. You will notice them by reading the dialplan yourself. It is fairly good commented so gifted people won't have any problems. Comments and proposals appreciated. Regards, Julian Pawlowski ________________________________________________________________ Verschicken Sie romantische, coole und witzige Bilder per SMS! Jetzt neu bei WEB.DE FreeMail: http://freemail.web.de/?mc=021193 _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users