search for: capi4linux

...with Asterisk. For testing I am using a HFC-ISDN passive PCI-card, in production a Digium Dual T1/E1 PCI-card will be used. I run CentOS 5.5 (Kernel 2.6.18) and Asterisk 1.4 (but I also can use 1.8) but did not find any solution where I think "that's it". What are you using? mISDN, CAPI4linux, HylaFAX, IAXmodem, chan_misdn, ... ? Can you point me to the correct direction, may be there are some more or less current howto's (more current than the ones from 2007 and earlier you find everywhere in the net)? Thanks a lot, -- Chau y hasta luego, Thorolf

...installed and working - on a dumb eicon card. It seems in order to get DTMF out of the BRI (for business banking - etc) - I should change from i4l drivers to capi drivers. wiki help seems to be for the Fritz card only...??? I have ticked the suggested boxes in 'menuconfig', explored the capi4linux websites - etc... but am missing some magic. I've "modprobe capi", if I don't "modprobe hisax type=11" to get- HiSax: Card 1 Protocol EDSS1 Id=HiSax (0) HiSax: Eicon.Diehl Diva driver Rev. 1.1.4.2 ... then whet am I meant to do instead? Obviously no *.... (load_module...

...BYEXTENSION ;============================================================ mode=immediate ;isdnmode=ptp ;msn=55512 ;controller=2 ;devices=30 --- The messege "CAPI not installed" is weird because CAPI *is* installed: --- pbx:~ # rpm -qa | grep capi avmfritzcapi-1.0-194 capisuite-0.4.3-52 capi4linux-2003.9.17-7 --- In this sense: do I need any other special package? TIA, Martin

...3.9.20060704-1 libraries for CAPI support ii libcapi20-dev 3.9.20060704-1 libraries for CAPI support ii avm-fritz-firmware-2.6.17-10 3.11+2.6.17.7-10.1 Firmware for AVM Fritz! ISDN hardware* and downloaded firmaware from * ftp://ftp.in-berlin.de/pub/capi4linux/firmware/b1/ .*My capi.conf is: *b1pci /usr/share/isdn/b1.t4 DSS1 - - - - P2P* Then I exec command capiinit start, I have noting on output, but it load modules: *root@asterisk:~# lsmod Module Size Used by b1pci 10624 0 b1...

I know this has come up before but... Has anyone done anything to get an IAX client built on Windows? I thought someone had started one, but I haven't heard anything about it since - and that was months ago? Anyone have any idea what the status is? -- Ron Gage - Saginaw, Michigan I am looking for work - resume at http://www.rongage.org/resume.doc Electrical Engineering, Linux Programming,

...users to review my plans and check whether my ambitions are feasible. The configuration that I would like to setup has the following characteristics: a. Pentium 166 (am I pushing it ?) based Asterisk box running Linux (what flavour ?) b. Hooked up to ISDN PBX using an ISDN4Linux (chan_modem ?) or CAPI4Linux (chan_capi ?) compatible ISDN controller. c. Asterisk accepting external calls from MSN's configured in PBX and transferred to Asterisk box (trivial !) d. Custom IVR application (module or AGI based ?) presenting caller with usual IVR stuff according to our needs and transfering (chan_modem or...

...users-admin@lists.digium.com [mailto:asterisk-users-admin@lists.digium.com] On Behalf Of Julian Pawlowski Sent: 07 June 2004 11:10 To: asterisk-users@lists.digium.com Subject: [Asterisk-Users] Updated: Advanced German Configuration Hi Folks, just updated my current Dialplan available on http://capi4linux.thepenguin.de/download/asterisk/config/ It now heavily uses ODBC database (MySQL) to hold most of the data like extensions and incoming connection numbers. An example databasefile is also included. The denylist has also been updated for future and current settings of the german telecom regulator....

Hello, list a have a problem i can start asterisk, i get the fowlling error: [chan_capi.so] => (Common ISDN API for Asterisk) == Parsing '/etc/asterisk/capi.conf': Found Feb 11 13:50:36 NOTICE[2535]: chan_capi.c:2636 load_module: CAPI not installed! Feb 11 13:50:36 WARNING[2535]: loader.c:345 ast_load_resource: chan_capi.so: load_module failed, returning -1 Feb 11 13:50:36

Hello all, I would like to know about the support for this ISDN passive card AVM Fritz-PCI v2.0 with Asterisk: 1. which drive should I use with Asterisk: isdn4linux or capi4linux from AVM (I read some messages on the asterisk-users archives but I didn't find the answer) 2. if the drive is isdn4linux then HiSAX support (for passive cards) is enough ? and the device /dev/ttyI0 (for the first card) is needed to define in modem.conf ? 3. if the drive is capi (fc...

I have an old A1 ISDN card that we used to use in the mid 1990's for the delivery of data to our ISP I have seen some users have been using them, with respect to doing web searches. Can someone please let me know what drivers I require to use this card under debian and with asterix, and what the limitations are of using this card. I dont want to make calls but do inbound using it. The

Hi folks, I just wanted to use Klaus-Peter Junghanns' great bri-stuf to work with the actual cvs head (26.05.2004). You can download my modified patched version of it under http://capi4linux.thepenguin.de/download/asterisk/ I think it works fine at the moment but I'm not sure if it's all perfect *g* ;-) Regards, Julian Pawlowski

Hi there, I just finished work on my current PBX dialplan configuration. I didn't find anything compareable yet so I think it might be interesting for someone else too. Short overview: - seperation of the numbers in blocks (just definded) - error/cause handling - advanced access control (even vor ISDN Zap clients) - access levels - denylist with national number blocks (for Germany) -

Hi Folks, just updated my current Dialplan available on http://capi4linux.thepenguin.de/download/asterisk/config/ It now heavily uses ODBC database (MySQL) to hold most of the data like extensions and incoming connection numbers. An example databasefile is also included. The denylist has also been updated for future and current settings of the german telecom regulator....

Hi ! I've fetched a spare AVM B1 card from the cellar, and installed it. After "modprobe b1pci" I did "capiinit" and capiinit moaned about a missing t1.b4. So I search the web and found one at http://www.avm.de/ftp/cardware/b1/x_misc/ddi/. When I now look at the controller, I finally see p2p-mode: # cat /proc/capi/controllers/1 name b1pciv4-a400 io

> If you can't wait you can use the patch from someone who merged the > bristuff patch with a more recent version of cvs head... > > This one: > http://capi4linux.thepenguin.de/download/asterisk/bri-stuff-0. > 0.2a-pp.tar.gz Thanks for that pointer, I'll give it a try. Bye, martin

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hello everyone, I've got an old AVM all-in-one ISDN box lying around. Currently, it's attached to my server via USB and CAPI4Linux and additionally has an analog DECT phone attached to one of its TAE ports. As I'm planning to switch to VOIP via cable internet, I'm now thinking about the following setup: [Internet] -> Cablemodem -> Computer w/ Asterisk -> AVM box -> Phone Two questions remain: 1. Is this...

Hello, I'm trying to install CAPI Driver for Suse 9.2 and I found the documentation for this pretty old since It refers to Suse 8.2 ( http://www.voip-info.org/wiki-Asterisk+AVM+Fritz+CAPI+Driver+Install ). This is especially apparent when I look at the section of these instructions for altering "src.drv/makefile" to replace the occurance of "CARD_PATH". I tried to

Hello I want to setup an Asterisk in several offices with 4 BRI ISDN. I am looking for recommendations on hardware. Criteria would be ease of setup, reliability and cost. The Eicon 4 BRI cards seem fairly pricey. Shame Digium don't do a ISDN BRI card. Angus -------------- next part -------------- An HTML attachment was scrubbed... URL:

...2.0 support in kernel 2.6.7 step 2. modprobe c4 to insmoded kernel module then: "You may need firmware in /usr/lib/isdn/ and a suitably configured /etc/capi.conf " i googled around for a suitable firmware (c4.bin) but the only one i was able to find is this: ftp://ftp.in-berlin.de/pub/capi4linux/firmware/c4/3-11-04 i cannot say if this one is ok or something other should be found & installed then i apt-got capi utils to have capiinit and capiinfo; you need capiinit to install firmware; using my knwoledge, the only way to have /usr/lib/isdn/c4.bin is installling suse 9, but this is...

I've got Zaphfc working running Asterisk v. 0.7.2 Then I have tried with Asterisk V. 1.0 and the latest from CVS - with no succes. Has anybody got zaphfc working with newer version than 0.7.2 ? NR -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040616/32481fca/attachment.htm