On Wed, 2004-04-21 at 17:31, Mark Phillips wrote:> Hi all,
>
> I have 3 * boxes all running the same OS and software version. Machine A
> has an X100P card, machines B and C do not. They all have the same
> dialplan.
>
> I can dial from machine A to either of the other 2 with no problem. I can
> dial from either of the other 2 to machine A with no problem. I cannot
> dial from B to C or vice versa.
>
> What's really wierd is that I can dial from machine B through machine A
to
> machine C. The IAX2 session then drops machine A from the picture and
> continues directly between B and C. The same happens in reverse.
>
> Why can I not dial directly from B to C? Do B and C require X100P cards
> before IAX2 will work correctly? I don't think this is the case because
> the call can be passed to them after it has been setup via A.
>
> Its really bugging me. Any ideas?
Is B and C registering to each other like they are to A?
--
Steven Critchfield <critch@basesys.com>