I am having an issue getting a DomU to boot properly. There is never any
indication of a stop error or kernel panic, it simply hangs after "Starting
crond [ OK ]" and never continues. I''ve included my mkinitrd and
output
from xm create... please help!
##### XENBUS errors #####
XENBUS: Device with no driver: device/vbd/2049
XENBUS: Device with no driver: device/vbd/2050
XENBUS: Device with no driver: device/vif/0
XENBUS: Device with no driver: device/vif/1
####################
##### mkinitrd #####
# mkinitrd --omit-scsi-modules --with=xennet --preload=xenblk /boot/initrd-
2.6.18-53.1.14.el5xen-noscsi.img $(uname -r)
################
##### xm create #####
# xm create /etc/xen/wwwstatic -c
Using config file "/etc/xen/wwwstatic".
Started domain wwwstatic
Bootdata ok (command line is root=/dev/sda1 ro)
Linux version 2.6.18-53.1.14.el5xen (mockbuild@builder6.centos.org) (gcc
version 4.1.2 20070626 (Red Hat 4.1.2-14)) #1 SMP Wed Mar 5 12:08:17 EST
2008
BIOS-provided physical RAM map:
Xen: 0000000000000000 - 0000000010800000 (usable)
No mptable found.
Built 1 zonelists. Total pages: 67584
Kernel command line: root=/dev/sda1 ro
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 16384 bytes)
Xen reported: 2393.994 MHz processor.
Console: colour dummy device 80x25
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
Software IO TLB disabled
Memory: 244960k/270336k available (2358k kernel code, 16872k reserved, 1325k
data, 172k init)
Calibrating delay using timer specific routine.. 5987.10 BogoMIPS
(lpj=11974209)
Security Framework v1.0.0 initialized
SELinux: Initializing.
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 256
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 3
(SMP-)alternatives turned off
Brought up 1 CPUs
checking if image is initramfs... it is
Grant table initialized
NET: Registered protocol family 16
ACPI Exception (utmutex-0262): AE_BAD_PARAMETER, Thread 127A0 could not
acquire Mutex [2] [20060707]
ACPI Exception (utmutex-0262): AE_BAD_PARAMETER, Thread 127A0 could not
acquire Mutex [2] [20060707]
Brought up 1 CPUs
PCI: setting up Xen PCI frontend stub
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI: disabled
xen_mem: Initialising balloon driver.
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: System does not support PCI
PCI: System does not support PCI
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 3, 32768 bytes)
TCP established hash table entries: 16384 (order: 6, 262144 bytes)
TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 16384 bind 8192)
TCP reno registered
audit: initializing netlink socket (disabled)
audit(1205035005.212:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key F8170EB5CF71EF90
- User ID: CentOS (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
rtc: IRQ 8 is not free.
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
Xen virtual console successfully installed as xvc0
Bootdata ok (command line is root=/dev/sda1 ro)
Linux version 2.6.18-53.1.14.el5xen (mockbuild@builder6.centos.org) (gcc
version 4.1.2 20070626 (Red Hat 4.1.2-14)) #1 SMP Wed Mar 5 12:08:17 EST
2008
BIOS-provided physical RAM map:
Xen: 0000000000000000 - 0000000010800000 (usable)
No mptable found.
Built 1 zonelists. Total pages: 67584
Kernel command line: root=/dev/sda1 ro
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 16384 bytes)
Xen reported: 2393.994 MHz processor.
Console: colour dummy device 80x25
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
Software IO TLB disabled
Memory: 244960k/270336k available (2358k kernel code, 16872k reserved, 1325k
data, 172k init)
Calibrating delay using timer specific routine.. 5987.10 BogoMIPS
(lpj=11974209)
Security Framework v1.0.0 initialized
SELinux: Initializing.
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 256
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 3
(SMP-)alternatives turned off
Brought up 1 CPUs
checking if image is initramfs... it is
Grant table initialized
NET: Registered protocol family 16
ACPI Exception (utmutex-0262): AE_BAD_PARAMETER, Thread 127A0 could not
acquire Mutex [2] [20060707]
ACPI Exception (utmutex-0262): AE_BAD_PARAMETER, Thread 127A0 could not
acquire Mutex [2] [20060707]
Brought up 1 CPUs
PCI: setting up Xen PCI frontend stub
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI: disabled
xen_mem: Initialising balloon driver.
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: System does not support PCI
PCI: System does not support PCI
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 3, 32768 bytes)
TCP established hash table entries: 16384 (order: 6, 262144 bytes)
TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 16384 bind 8192)
TCP reno registered
audit: initializing netlink socket (disabled)
audit(1205035005.212:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key F8170EB5CF71EF90
- User ID: CentOS (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
rtc: IRQ 8 is not free.
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
Xen virtual console successfully installed as xvc0
Event-channel device installed.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: No PS/2 controller found. Probing ports directly.
i8042.c: No controller found.
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
XENBUS: Device with no driver: device/vbd/2049
XENBUS: Device with no driver: device/vbd/2050
XENBUS: Device with no driver: device/vif/0
XENBUS: Device with no driver: device/vif/1
Write protecting the kernel read-only data: 445k
Red Hat nash version 5.1.19.6 starting
Mounting proc filesystem
Mounting sysfs filesystem
Creating /dev
Creating initial device nodes
Setting up hotplug.
Creating block device nodes.
Loading xenblk.ko module
Registering block device major 8
Loading uhci-hcd.ko module
USB Universal Host Controller Interface driver v3.0
Loading ohci-hcd.ko module
Loading ehci-hcd.ko module
Loading jbd.ko module
Loading ext3.ko module
Loading scsi_mod.ko module
SCSI subsystem initialized
Loading libata.ko module
Loading ata_piix.ko module
Loading dm-mod.ko module
device-mapper: ioctl: 4.11.0-ioctl (2006-09-14) initialised:
dm-devel@redhat.com
Loading dm-mirror.ko module
Loading dm-zero.ko module
Loading dm-snapshot.ko module
Loading xennet.ko module
netfront: Initialising virtual ethernet driver.
netfront: device eth0 has flipping receive path.
netfront: device eth1 has flipping receive path.
Waiting for driver initialization.
Scanning and configuring dmraid supported devices
Creating root device.
Mounting root filesystem.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Setting up other filesystems.
Setting up new root fs
no fstab.sys, mounting internal defaults
Switching to new root and running init.
unmounting old /dev
unmounting old /proc
unmounting old /sys
INIT: version 2.86 booting
Welcome to CentOS release 5 (Final)
Press ''I'' to enter interactive startup.
Setting clock : Sat Mar 8 22:56:56 EST 2008 [ OK ]
Starting udev: [ OK ]
Setting hostname localhost.localdomain: [ OK ]
DM multipath kernel driver not loaded
No devices found
Setting up Logical Volume Management: No volume groups found
[ OK ]
Checking filesystems
Checking all file systems.
[/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a /dev/sda1
/dev/sda1: clean, 19473/655360 files, 157996/1310720 blocks
[ OK ]
Remounting root filesystem in read-write mode: [ OK ]
Mounting local filesystems: [ OK ]
Enabling /etc/fstab swaps: [ OK ]
INIT: Entering runlevel: 3
Entering non-interactive startup
Bringing up loopback interface: [ OK ]
Bringing up interface eth0: [ OK ]
Starting system logger: [ OK ]
Starting kernel logger: [ OK ]
Starting sshd: [ OK ]
Starting crond: [ OK ]
#########################
_______________________________________________
Xen-users mailing list
Xen-users@lists.xensource.com
http://lists.xensource.com/xen-users
I am having an issue getting a DomU to boot properly. There is never any indication of a stop error or kernel panic, it simply hangs after "Starting crond [ OK ]" and never continues. I''ve included my mkinitrd and output from xm create... please help! ##### XENBUS errors ##### XENBUS: Device with no driver: device/vbd/2049 XENBUS: Device with no driver: device/vbd/2050 XENBUS: Device with no driver: device/vif/0 XENBUS: Device with no driver: device/vif/1 #################### ##### mkinitrd ##### # mkinitrd --omit-scsi-modules --with=xennet --preload=xenblk /boot/initrd- 2.6.18-53.1.14.el5xen-noscsi.img $(uname -r) ################ ##### xm create ##### # xm create /etc/xen/wwwstatic -c Using config file "/etc/xen/wwwstatic". Started domain wwwstatic Bootdata ok (command line is root=/dev/sda1 ro) Linux version 2.6.18-53.1.14.el5xen (mockbuild@builder6.centos.org) (gcc version 4.1.2 20070626 (Red Hat 4.1.2-14)) #1 SMP Wed Mar 5 12:08:17 EST 2008 BIOS-provided physical RAM map: Xen: 0000000000000000 - 0000000010800000 (usable) No mptable found. Built 1 zonelists. Total pages: 67584 Kernel command line: root=/dev/sda1 ro Initializing CPU#0 PID hash table entries: 2048 (order: 11, 16384 bytes) Xen reported: 2393.994 MHz processor. Console: colour dummy device 80x25 Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) Software IO TLB disabled Memory: 244960k/270336k available (2358k kernel code, 16872k reserved, 1325k data, 172k init) Calibrating delay using timer specific routine.. 5987.10 BogoMIPS (lpj=11974209) Security Framework v1.0.0 initialized SELinux: Initializing. selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 256 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 3 (SMP-)alternatives turned off Brought up 1 CPUs checking if image is initramfs... it is Grant table initialized NET: Registered protocol family 16 ACPI Exception (utmutex-0262): AE_BAD_PARAMETER, Thread 127A0 could not acquire Mutex [2] [20060707] ACPI Exception (utmutex-0262): AE_BAD_PARAMETER, Thread 127A0 could not acquire Mutex [2] [20060707] Brought up 1 CPUs PCI: setting up Xen PCI frontend stub ACPI: Interpreter disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI: disabled xen_mem: Initialising balloon driver. usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: System does not support PCI PCI: System does not support PCI NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 3, 32768 bytes) TCP established hash table entries: 16384 (order: 6, 262144 bytes) TCP bind hash table entries: 8192 (order: 5, 131072 bytes) TCP: Hash tables configured (established 16384 bind 8192) TCP reno registered audit: initializing netlink socket (disabled) audit(1205035005.212:1): initialized VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) Initializing Cryptographic API ksign: Installing public key data Loading keyring - Added public key F8170EB5CF71EF90 - User ID: CentOS (Kernel Module GPG key) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 rtc: IRQ 8 is not free. Non-volatile memory driver v1.2 Linux agpgart interface v0.101 (c) Dave Jones RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize Xen virtual console successfully installed as xvc0 Bootdata ok (command line is root=/dev/sda1 ro) Linux version 2.6.18-53.1.14.el5xen (mockbuild@builder6.centos.org) (gcc version 4.1.2 20070626 (Red Hat 4.1.2-14)) #1 SMP Wed Mar 5 12:08:17 EST 2008 BIOS-provided physical RAM map: Xen: 0000000000000000 - 0000000010800000 (usable) No mptable found. Built 1 zonelists. Total pages: 67584 Kernel command line: root=/dev/sda1 ro Initializing CPU#0 PID hash table entries: 2048 (order: 11, 16384 bytes) Xen reported: 2393.994 MHz processor. Console: colour dummy device 80x25 Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) Software IO TLB disabled Memory: 244960k/270336k available (2358k kernel code, 16872k reserved, 1325k data, 172k init) Calibrating delay using timer specific routine.. 5987.10 BogoMIPS (lpj=11974209) Security Framework v1.0.0 initialized SELinux: Initializing. selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 256 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 3 (SMP-)alternatives turned off Brought up 1 CPUs checking if image is initramfs... it is Grant table initialized NET: Registered protocol family 16 ACPI Exception (utmutex-0262): AE_BAD_PARAMETER, Thread 127A0 could not acquire Mutex [2] [20060707] ACPI Exception (utmutex-0262): AE_BAD_PARAMETER, Thread 127A0 could not acquire Mutex [2] [20060707] Brought up 1 CPUs PCI: setting up Xen PCI frontend stub ACPI: Interpreter disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI: disabled xen_mem: Initialising balloon driver. usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: System does not support PCI PCI: System does not support PCI NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 3, 32768 bytes) TCP established hash table entries: 16384 (order: 6, 262144 bytes) TCP bind hash table entries: 8192 (order: 5, 131072 bytes) TCP: Hash tables configured (established 16384 bind 8192) TCP reno registered audit: initializing netlink socket (disabled) audit(1205035005.212:1): initialized VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) Initializing Cryptographic API ksign: Installing public key data Loading keyring - Added public key F8170EB5CF71EF90 - User ID: CentOS (Kernel Module GPG key) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 rtc: IRQ 8 is not free. Non-volatile memory driver v1.2 Linux agpgart interface v0.101 (c) Dave Jones RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize Xen virtual console successfully installed as xvc0 Event-channel device installed. Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx ide-floppy driver 0.99.newide usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver PNP: No PS/2 controller found. Probing ports directly. i8042.c: No controller found. mice: PS/2 mouse device common for all mice md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 TCP bic registered Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 XENBUS: Device with no driver: device/vbd/2049 XENBUS: Device with no driver: device/vbd/2050 XENBUS: Device with no driver: device/vif/0 XENBUS: Device with no driver: device/vif/1 Write protecting the kernel read-only data: 445k Red Hat nash version 5.1.19.6 starting Mounting proc filesystem Mounting sysfs filesystem Creating /dev Creating initial device nodes Setting up hotplug. Creating block device nodes. Loading xenblk.ko module Registering block device major 8 Loading uhci-hcd.ko module USB Universal Host Controller Interface driver v3.0 Loading ohci-hcd.ko module Loading ehci-hcd.ko module Loading jbd.ko module Loading ext3.ko module Loading scsi_mod.ko module SCSI subsystem initialized Loading libata.ko module Loading ata_piix.ko module Loading dm-mod.ko module device-mapper: ioctl: 4.11.0-ioctl (2006-09-14) initialised: dm-devel@redhat.com Loading dm-mirror.ko module Loading dm-zero.ko module Loading dm-snapshot.ko module Loading xennet.ko module netfront: Initialising virtual ethernet driver. netfront: device eth0 has flipping receive path. netfront: device eth1 has flipping receive path. Waiting for driver initialization. Scanning and configuring dmraid supported devices Creating root device. Mounting root filesystem. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. Setting up other filesystems. Setting up new root fs no fstab.sys, mounting internal defaults Switching to new root and running init. unmounting old /dev unmounting old /proc unmounting old /sys INIT: version 2.86 booting Welcome to CentOS release 5 (Final) Press ''I'' to enter interactive startup. Setting clock : Sat Mar 8 22:56:56 EST 2008 [ OK ] Starting udev: [ OK ] Setting hostname localhost.localdomain: [ OK ] DM multipath kernel driver not loaded No devices found Setting up Logical Volume Management: No volume groups found [ OK ] Checking filesystems Checking all file systems. [/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a /dev/sda1 /dev/sda1: clean, 19473/655360 files, 157996/1310720 blocks [ OK ] Remounting root filesystem in read-write mode: [ OK ] Mounting local filesystems: [ OK ] Enabling /etc/fstab swaps: [ OK ] INIT: Entering runlevel: 3 Entering non-interactive startup Bringing up loopback interface: [ OK ] Bringing up interface eth0: [ OK ] Starting system logger: [ OK ] Starting kernel logger: [ OK ] Starting sshd: [ OK ] Starting crond: [ OK ] ######################### _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
Possibly Parallel Threads
- my domU from jailtime.org using latests xen kernel freezees
- RE: RedHat DomU hanging
- RH domU doesn''t see disk?
- CentOS 4.4 Xen VM/VPS install on CentOS 5 (xen kernel) issues
- 64bit guest on top of 64bit hypervisor+dom0 does not boot with virsh while it does with xm command