Hallo *!
I have a board SE7501HG2.
- On 2.6.18 ipmitool works succefull.
On Xen-3.1 (2.6.18) ipmitool say:
# ipmitool sensor
WARNING: Unknown SDR repository version 0x00
SDR record id 0x0000: invalid length 0
(see thread [ipmitool-devel] Unknown SDR version)
- On page [4] as written:
ipmitool -> BMC ---> i2c/smbus
''-> SDR
- On Thread [9] was written:
Workaround: disable buggy IPMI/BMC on NetXtreme II
The problem is: i have not NetXtreme, but "Intel(R) PRO/1000"
Is it always still the cause for this problem?
- a previous tests result: ipmi must be running on node 254.
But this is connect to gntdev:
# cat /proc/devices | egrep "ipmi|254"
251 ipmidev
254 gntdev
- gntdev seen match to CONFIG_XEN_GRANT_DEV
What can i do?
Xen version 3.1.0 (root@hrz.mydomain.de) (gcc version 4.1.2 20061115
(prerelease) (Debian 4.1.1-21)) Fri Nov 30 13:20:15 CET 2007
# ipmitool -V
ipmitool version 1.8.8
# lsmod | grep ipmi
ipmi_si 33740 0
ipmi_devintf 7816 0
ipmi_msghandler 31680 2 ipmi_si,ipmi_devintf
# ls /proc/bus
input pci usb
# lspci | grep SMB
00:1f.3 SMBus: Intel Corporation 82801CA/CAM SMBus Controller (rev 02)
[4] http://it-dep-fio-ds.web.cern.ch/it-dep-fio-ds/Presentations/2004/ipmi_serve
r_management.ppt PP Intelligent Platform Management Interface
[9] http://lists.xensource.com/archives/html/xen-users/2006-11/msg00465.html
[Xen-users] Re: Broadcom Corporation NetXtreme II BCM5708 bnx2 bridging
- workaround: dis. IPMI on networkadapter
regards Heiko
LauNOC
_______________________________________________
Xen-users mailing list
Xen-users@lists.xensource.com
http://lists.xensource.com/xen-users
Hi,>- a previous tests result: ipmi must be running on node 254. > But this is connect to gntdev: > > # cat /proc/devices | egrep "ipmi|254" > 251 ipmidev > 254 gntdev >ipmi driver don''t specify the device number. So ipmidev''s number is not always 254. if you want to know the number, you can see by using "ls -l /dev/ipmi0''. FYI, I can use ''ipmitool sensor'' with ipmitool-1.6.0+RHEL5.1. Best Regards, Akio Takebe _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
He, i found it necessary to add the ipmi kernel modules to the initrd, anyway, i was always able to modprobe them by hand without any problems. greetings Stephan Akio Takebe schrieb:> Hi, > >> - a previous tests result: ipmi must be running on node 254. >> But this is connect to gntdev: >> >> # cat /proc/devices | egrep "ipmi|254" >> 251 ipmidev >> 254 gntdev >> > ipmi driver don''t specify the device number. > So ipmidev''s number is not always 254. > if you want to know the number, you can see by using "ls -l /dev/ipmi0''. > > FYI, I can use ''ipmitool sensor'' with ipmitool-1.6.0+RHEL5.1. > > Best Regards, > > Akio Takebe > > > _______________________________________________ > Xen-users mailing list > Xen-users@lists.xensource.com > http://lists.xensource.com/xen-users-- Stephan Seitz Senior System Administrator *netz-haut* e.K. multimediale kommunikation zweierweg 22 97074 würzburg fon: +49 931 2876247 fax: +49 931 2876248 web: www.netz-haut.de <http://www.netz-haut.de/> registriergericht: amtsgericht würzburg, hra 5054 _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users