OK, I need to do something like this to io_apic.c - split the hardware
specific parts out under mach-default, so we can override them for other
subarchitectures. It's not finished, needs header file and makefile
work. Would you be willing to take this if I do it? I'm not going to
bother if you're not, such refactorings are a pig to maintain out of
tree.
Frankly, io_apic.c needs a damned good scrubbing anyway, but this seems
like a reasonable first step to me. (we also need to cross-link better
with x86_64 code, but ...not all in one go ;-)).
diff -purN -X /home/mbligh/.diff.exclude virgin/arch/i386/kernel/apic.c
io_apic_split/arch/i386/kernel/apic.c
--- virgin/arch/i386/kernel/apic.c 2005-06-17 12:48:29.000000000 -0700
+++ io_apic_split/arch/i386/kernel/apic.c 2005-08-08 16:00:34.869760704 -0700
@@ -205,22 +205,6 @@ void __init connect_bsp_APIC(void)
enable_apic_mode();
}
-void disconnect_bsp_APIC(void)
-{
- if (pic_mode) {
- /*
- * Put the board back into PIC mode (has an effect
- * only on certain older boards). Note that APIC
- * interrupts, including IPIs, won't work beyond
- * this point! The only exception are INIT IPIs.
- */
- apic_printk(APIC_VERBOSE, "disabling APIC mode, "
- "entering PIC mode.\n");
- outb(0x70, 0x22);
- outb(0x00, 0x23);
- }
-}
-
void disable_local_APIC(void)
{
unsigned long value;
@@ -298,22 +282,6 @@ int __init verify_local_APIC(void)
return 1;
}
-void __init sync_Arb_IDs(void)
-{
- /* Unsupported on P4 - see Intel Dev. Manual Vol. 3, Ch. 8.6.1 */
- unsigned int ver = GET_APIC_VERSION(apic_read(APIC_LVR));
- if (ver >= 0x14) /* P4 or higher */
- return;
- /*
- * Wait for idle.
- */
- apic_wait_icr_idle();
-
- apic_printk(APIC_DEBUG, "Synchronizing Arb IDs.\n");
- apic_write_around(APIC_ICR, APIC_DEST_ALLINC | APIC_INT_LEVELTRIG
- | APIC_DM_INIT);
-}
-
extern void __error_in_apic_c (void);
/*
diff -purN -X /home/mbligh/.diff.exclude virgin/arch/i386/kernel/io_apic.c
io_apic_split/arch/i386/kernel/io_apic.c
--- virgin/arch/i386/kernel/io_apic.c 2005-06-17 12:48:29.000000000 -0700
+++ io_apic_split/arch/i386/kernel/io_apic.c 2005-08-08 16:11:35.786286120 -0700
@@ -107,143 +107,6 @@ static void add_pin_to_irq(unsigned int
entry->pin = pin;
}
-/*
- * Reroute an IRQ to a different pin.
- */
-static void __init replace_pin_at_irq(unsigned int irq,
- int oldapic, int oldpin,
- int newapic, int newpin)
-{
- struct irq_pin_list *entry = irq_2_pin + irq;
-
- while (1) {
- if (entry->apic == oldapic && entry->pin == oldpin) {
- entry->apic = newapic;
- entry->pin = newpin;
- }
- if (!entry->next)
- break;
- entry = irq_2_pin + entry->next;
- }
-}
-
-static void __modify_IO_APIC_irq (unsigned int irq, unsigned long enable,
unsigned long disable)
-{
- struct irq_pin_list *entry = irq_2_pin + irq;
- unsigned int pin, reg;
-
- for (;;) {
- pin = entry->pin;
- if (pin == -1)
- break;
- reg = io_apic_read(entry->apic, 0x10 + pin*2);
- reg &= ~disable;
- reg |= enable;
- io_apic_modify(entry->apic, 0x10 + pin*2, reg);
- if (!entry->next)
- break;
- entry = irq_2_pin + entry->next;
- }
-}
-
-/* mask = 1 */
-static void __mask_IO_APIC_irq (unsigned int irq)
-{
- __modify_IO_APIC_irq(irq, 0x00010000, 0);
-}
-
-/* mask = 0 */
-static void __unmask_IO_APIC_irq (unsigned int irq)
-{
- __modify_IO_APIC_irq(irq, 0, 0x00010000);
-}
-
-/* mask = 1, trigger = 0 */
-static void __mask_and_edge_IO_APIC_irq (unsigned int irq)
-{
- __modify_IO_APIC_irq(irq, 0x00010000, 0x00008000);
-}
-
-/* mask = 0, trigger = 1 */
-static void __unmask_and_level_IO_APIC_irq (unsigned int irq)
-{
- __modify_IO_APIC_irq(irq, 0x00008000, 0x00010000);
-}
-
-static void mask_IO_APIC_irq (unsigned int irq)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&ioapic_lock, flags);
- __mask_IO_APIC_irq(irq);
- spin_unlock_irqrestore(&ioapic_lock, flags);
-}
-
-static void unmask_IO_APIC_irq (unsigned int irq)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&ioapic_lock, flags);
- __unmask_IO_APIC_irq(irq);
- spin_unlock_irqrestore(&ioapic_lock, flags);
-}
-
-static void clear_IO_APIC_pin(unsigned int apic, unsigned int pin)
-{
- struct IO_APIC_route_entry entry;
- unsigned long flags;
-
- /* Check delivery_mode to be sure we're not clearing an SMI pin */
- spin_lock_irqsave(&ioapic_lock, flags);
- *(((int*)&entry) + 0) = io_apic_read(apic, 0x10 + 2 * pin);
- *(((int*)&entry) + 1) = io_apic_read(apic, 0x11 + 2 * pin);
- spin_unlock_irqrestore(&ioapic_lock, flags);
- if (entry.delivery_mode == dest_SMI)
- return;
-
- /*
- * Disable it in the IO-APIC irq-routing table:
- */
- memset(&entry, 0, sizeof(entry));
- entry.mask = 1;
- spin_lock_irqsave(&ioapic_lock, flags);
- io_apic_write(apic, 0x10 + 2 * pin, *(((int *)&entry) + 0));
- io_apic_write(apic, 0x11 + 2 * pin, *(((int *)&entry) + 1));
- spin_unlock_irqrestore(&ioapic_lock, flags);
-}
-
-static void clear_IO_APIC (void)
-{
- int apic, pin;
-
- for (apic = 0; apic < nr_ioapics; apic++)
- for (pin = 0; pin < nr_ioapic_registers[apic]; pin++)
- clear_IO_APIC_pin(apic, pin);
-}
-
-static void set_ioapic_affinity_irq(unsigned int irq, cpumask_t cpumask)
-{
- unsigned long flags;
- int pin;
- struct irq_pin_list *entry = irq_2_pin + irq;
- unsigned int apicid_value;
-
- apicid_value = cpu_mask_to_apicid(cpumask);
- /* Prepare to do the io_apic_write */
- apicid_value = apicid_value << 24;
- spin_lock_irqsave(&ioapic_lock, flags);
- for (;;) {
- pin = entry->pin;
- if (pin == -1)
- break;
- io_apic_write(entry->apic, 0x10 + 1 + pin*2, apicid_value);
- if (!entry->next)
- break;
- entry = irq_2_pin + entry->next;
- }
- spin_unlock_irqrestore(&ioapic_lock, flags);
-}
-
#if defined(CONFIG_IRQBALANCE)
# include <asm/processor.h> /* kernel_thread() */
# include <linux/kernel_stat.h> /* kstat */
@@ -661,24 +524,6 @@ late_initcall(balanced_irq_init);
static inline void move_irq(int irq) { }
#endif /* CONFIG_IRQBALANCE */
-#ifndef CONFIG_SMP
-void fastcall send_IPI_self(int vector)
-{
- unsigned int cfg;
-
- /*
- * Wait for idle.
- */
- apic_wait_icr_idle();
- cfg = APIC_DM_FIXED | APIC_DEST_SELF | vector | APIC_DEST_LOGICAL;
- /*
- * Send the IPI. The write to APIC_ICR fires this off.
- */
- apic_write_around(APIC_ICR, cfg);
-}
-#endif /* !CONFIG_SMP */
-
-
/*
* support for broken MP BIOSs, enables hand-redirection of PIRQ0-7 to
* specific CPU-side IRQs.
@@ -745,29 +590,6 @@ static int find_irq_entry(int apic, int
}
/*
- * Find the pin to which IRQ[irq] (ISA) is connected
- */
-static int find_isa_irq_pin(int irq, int type)
-{
- int i;
-
- for (i = 0; i < mp_irq_entries; i++) {
- int lbus = mp_irqs[i].mpc_srcbus;
-
- if ((mp_bus_id_to_type[lbus] == MP_BUS_ISA ||
- mp_bus_id_to_type[lbus] == MP_BUS_EISA ||
- mp_bus_id_to_type[lbus] == MP_BUS_MCA ||
- mp_bus_id_to_type[lbus] == MP_BUS_NEC98
- ) &&
- (mp_irqs[i].mpc_irqtype == type) &&
- (mp_irqs[i].mpc_srcbusirq == irq))
-
- return mp_irqs[i].mpc_dstirq;
- }
- return -1;
-}
-
-/*
* Find a specific PCI IRQ entry.
* Not an __init, possibly needed by modules
*/
@@ -814,30 +636,6 @@ int IO_APIC_get_PCI_irq_vector(int bus,
}
/*
- * This function currently is only a helper for the i386 smp boot process where
- * we need to reprogram the ioredtbls to cater for the cpus which have come
online
- * so mask in all cases should simply be TARGET_CPUS
- */
-void __init setup_ioapic_dest(void)
-{
- int pin, ioapic, irq, irq_entry;
-
- if (skip_ioapic_setup == 1)
- return;
-
- for (ioapic = 0; ioapic < nr_ioapics; ioapic++) {
- for (pin = 0; pin < nr_ioapic_registers[ioapic]; pin++) {
- irq_entry = find_irq_entry(ioapic, pin, mp_INT);
- if (irq_entry == -1)
- continue;
- irq = pin_2_irq(irq_entry, ioapic, pin);
- set_ioapic_affinity_irq(irq, TARGET_CPUS);
- }
-
- }
-}
-
-/*
* EISA Edge/Level control register, ELCR
*/
static int EISA_ELCR(unsigned int irq)
@@ -1153,32 +951,6 @@ next:
return current_vector;
}
-static struct hw_interrupt_type ioapic_level_type;
-static struct hw_interrupt_type ioapic_edge_type;
-
-#define IOAPIC_AUTO -1
-#define IOAPIC_EDGE 0
-#define IOAPIC_LEVEL 1
-
-static inline void ioapic_register_intr(int irq, int vector, unsigned long
trigger)
-{
- if (use_pci_vector() && !platform_legacy_irq(irq)) {
- if ((trigger == IOAPIC_AUTO && IO_APIC_irq_trigger(irq)) ||
- trigger == IOAPIC_LEVEL)
- irq_desc[vector].handler = &ioapic_level_type;
- else
- irq_desc[vector].handler = &ioapic_edge_type;
- set_intr_gate(vector, interrupt[vector]);
- } else {
- if ((trigger == IOAPIC_AUTO && IO_APIC_irq_trigger(irq)) ||
- trigger == IOAPIC_LEVEL)
- irq_desc[irq].handler = &ioapic_level_type;
- else
- irq_desc[irq].handler = &ioapic_edge_type;
- set_intr_gate(vector, interrupt[irq]);
- }
-}
-
static void __init setup_IO_APIC_irqs(void)
{
struct IO_APIC_route_entry entry;
@@ -1255,203 +1027,6 @@ static void __init setup_IO_APIC_irqs(vo
apic_printk(APIC_VERBOSE, " not connected.\n");
}
-/*
- * Set up the 8259A-master output pin:
- */
-static void __init setup_ExtINT_IRQ0_pin(unsigned int pin, int vector)
-{
- struct IO_APIC_route_entry entry;
- unsigned long flags;
-
- memset(&entry,0,sizeof(entry));
-
- disable_8259A_irq(0);
-
- /* mask LVT0 */
- apic_write_around(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT);
-
- /*
- * We use logical delivery to get the timer IRQ
- * to the first CPU.
- */
- entry.dest_mode = INT_DEST_MODE;
- entry.mask = 0; /* unmask IRQ now */
- entry.dest.logical.logical_dest = cpu_mask_to_apicid(TARGET_CPUS);
- entry.delivery_mode = INT_DELIVERY_MODE;
- entry.polarity = 0;
- entry.trigger = 0;
- entry.vector = vector;
-
- /*
- * The timer IRQ doesn't have to know that behind the
- * scene we have a 8259A-master in AEOI mode ...
- */
- irq_desc[0].handler = &ioapic_edge_type;
-
- /*
- * Add it to the IO-APIC irq-routing table:
- */
- spin_lock_irqsave(&ioapic_lock, flags);
- io_apic_write(0, 0x11+2*pin, *(((int *)&entry)+1));
- io_apic_write(0, 0x10+2*pin, *(((int *)&entry)+0));
- spin_unlock_irqrestore(&ioapic_lock, flags);
-
- enable_8259A_irq(0);
-}
-
-static inline void UNEXPECTED_IO_APIC(void)
-{
-}
-
-void __init print_IO_APIC(void)
-{
- int apic, i;
- union IO_APIC_reg_00 reg_00;
- union IO_APIC_reg_01 reg_01;
- union IO_APIC_reg_02 reg_02;
- union IO_APIC_reg_03 reg_03;
- unsigned long flags;
-
- if (apic_verbosity == APIC_QUIET)
- return;
-
- printk(KERN_DEBUG "number of MP IRQ sources: %d.\n",
mp_irq_entries);
- for (i = 0; i < nr_ioapics; i++)
- printk(KERN_DEBUG "number of IO-APIC #%d registers: %d.\n",
- mp_ioapics[i].mpc_apicid, nr_ioapic_registers[i]);
-
- /*
- * We are a bit conservative about what we expect. We have to
- * know about every hardware change ASAP.
- */
- printk(KERN_INFO "testing the IO APIC.......................\n");
-
- for (apic = 0; apic < nr_ioapics; apic++) {
-
- spin_lock_irqsave(&ioapic_lock, flags);
- reg_00.raw = io_apic_read(apic, 0);
- reg_01.raw = io_apic_read(apic, 1);
- if (reg_01.bits.version >= 0x10)
- reg_02.raw = io_apic_read(apic, 2);
- if (reg_01.bits.version >= 0x20)
- reg_03.raw = io_apic_read(apic, 3);
- spin_unlock_irqrestore(&ioapic_lock, flags);
-
- printk(KERN_DEBUG "IO APIC #%d......\n",
mp_ioapics[apic].mpc_apicid);
- printk(KERN_DEBUG ".... register #00: %08X\n", reg_00.raw);
- printk(KERN_DEBUG "....... : physical APIC id: %02X\n",
reg_00.bits.ID);
- printk(KERN_DEBUG "....... : Delivery Type: %X\n",
reg_00.bits.delivery_type);
- printk(KERN_DEBUG "....... : LTS : %X\n",
reg_00.bits.LTS);
- if (reg_00.bits.ID >= get_physical_broadcast())
- UNEXPECTED_IO_APIC();
- if (reg_00.bits.__reserved_1 || reg_00.bits.__reserved_2)
- UNEXPECTED_IO_APIC();
-
- printk(KERN_DEBUG ".... register #01: %08X\n", reg_01.raw);
- printk(KERN_DEBUG "....... : max redirection entries: %04X\n",
reg_01.bits.entries);
- if ( (reg_01.bits.entries != 0x0f) && /* older (Neptune) boards */
- (reg_01.bits.entries != 0x17) && /* typical ISA+PCI boards */
- (reg_01.bits.entries != 0x1b) && /* Compaq Proliant boards */
- (reg_01.bits.entries != 0x1f) && /* dual Xeon boards */
- (reg_01.bits.entries != 0x22) && /* bigger Xeon boards */
- (reg_01.bits.entries != 0x2E) &&
- (reg_01.bits.entries != 0x3F)
- )
- UNEXPECTED_IO_APIC();
-
- printk(KERN_DEBUG "....... : PRQ implemented: %X\n",
reg_01.bits.PRQ);
- printk(KERN_DEBUG "....... : IO APIC version: %04X\n",
reg_01.bits.version);
- if ( (reg_01.bits.version != 0x01) && /* 82489DX IO-APICs */
- (reg_01.bits.version != 0x10) && /* oldest IO-APICs */
- (reg_01.bits.version != 0x11) && /* Pentium/Pro IO-APICs */
- (reg_01.bits.version != 0x13) && /* Xeon IO-APICs */
- (reg_01.bits.version != 0x20) /* Intel P64H (82806 AA) */
- )
- UNEXPECTED_IO_APIC();
- if (reg_01.bits.__reserved_1 || reg_01.bits.__reserved_2)
- UNEXPECTED_IO_APIC();
-
- /*
- * Some Intel chipsets with IO APIC VERSION of 0x1? don't have reg_02,
- * but the value of reg_02 is read as the previous read register
- * value, so ignore it if reg_02 == reg_01.
- */
- if (reg_01.bits.version >= 0x10 && reg_02.raw != reg_01.raw) {
- printk(KERN_DEBUG ".... register #02: %08X\n", reg_02.raw);
- printk(KERN_DEBUG "....... : arbitration: %02X\n",
reg_02.bits.arbitration);
- if (reg_02.bits.__reserved_1 || reg_02.bits.__reserved_2)
- UNEXPECTED_IO_APIC();
- }
-
- /*
- * Some Intel chipsets with IO APIC VERSION of 0x2? don't have reg_02
- * or reg_03, but the value of reg_0[23] is read as the previous read
- * register value, so ignore it if reg_03 == reg_0[12].
- */
- if (reg_01.bits.version >= 0x20 && reg_03.raw != reg_02.raw
&&
- reg_03.raw != reg_01.raw) {
- printk(KERN_DEBUG ".... register #03: %08X\n", reg_03.raw);
- printk(KERN_DEBUG "....... : Boot DT : %X\n",
reg_03.bits.boot_DT);
- if (reg_03.bits.__reserved_1)
- UNEXPECTED_IO_APIC();
- }
-
- printk(KERN_DEBUG ".... IRQ redirection table:\n");
-
- printk(KERN_DEBUG " NR Log Phy Mask Trig IRR Pol"
- " Stat Dest Deli Vect: \n");
-
- for (i = 0; i <= reg_01.bits.entries; i++) {
- struct IO_APIC_route_entry entry;
-
- spin_lock_irqsave(&ioapic_lock, flags);
- *(((int *)&entry)+0) = io_apic_read(apic, 0x10+i*2);
- *(((int *)&entry)+1) = io_apic_read(apic, 0x11+i*2);
- spin_unlock_irqrestore(&ioapic_lock, flags);
-
- printk(KERN_DEBUG " %02x %03X %02X ",
- i,
- entry.dest.logical.logical_dest,
- entry.dest.physical.physical_dest
- );
-
- printk("%1d %1d %1d %1d %1d %1d %1d %02X\n",
- entry.mask,
- entry.trigger,
- entry.irr,
- entry.polarity,
- entry.delivery_status,
- entry.dest_mode,
- entry.delivery_mode,
- entry.vector
- );
- }
- }
- if (use_pci_vector())
- printk(KERN_INFO "Using vector-based indexing\n");
- printk(KERN_DEBUG "IRQ to pin mappings:\n");
- for (i = 0; i < NR_IRQS; i++) {
- struct irq_pin_list *entry = irq_2_pin + i;
- if (entry->pin < 0)
- continue;
- if (use_pci_vector() && !platform_legacy_irq(i))
- printk(KERN_DEBUG "IRQ%d ", IO_APIC_VECTOR(i));
- else
- printk(KERN_DEBUG "IRQ%d ", i);
- for (;;) {
- printk("-> %d:%d", entry->apic, entry->pin);
- if (!entry->next)
- break;
- entry = irq_2_pin + entry->next;
- }
- printk("\n");
- }
-
- printk(KERN_INFO ".................................... done.\n");
-
- return;
-}
-
#if 0
static void print_APIC_bitfield (int base)
@@ -1641,345 +1216,6 @@ void disable_IO_APIC(void)
disconnect_bsp_APIC();
}
-/*
- * function to set the IO-APIC physical IDs based on the
- * values stored in the MPC table.
- *
- * by Matt Domsch <Matt_Domsch@dell.com> Tue Dec 21 12:25:05 CST 1999
- */
-
-#ifndef CONFIG_X86_NUMAQ
-static void __init setup_ioapic_ids_from_mpc(void)
-{
- union IO_APIC_reg_00 reg_00;
- physid_mask_t phys_id_present_map;
- int apic;
- int i;
- unsigned char old_id;
- unsigned long flags;
-
- /*
- * This is broken; anything with a real cpu count has to
- * circumvent this idiocy regardless.
- */
- phys_id_present_map = ioapic_phys_id_map(phys_cpu_present_map);
-
- /*
- * Set the IOAPIC ID to the value stored in the MPC table.
- */
- for (apic = 0; apic < nr_ioapics; apic++) {
-
- /* Read the register 0 value */
- spin_lock_irqsave(&ioapic_lock, flags);
- reg_00.raw = io_apic_read(apic, 0);
- spin_unlock_irqrestore(&ioapic_lock, flags);
-
- old_id = mp_ioapics[apic].mpc_apicid;
-
- if (mp_ioapics[apic].mpc_apicid >= get_physical_broadcast()) {
- printk(KERN_ERR "BIOS bug, IO-APIC#%d ID is %d in the MPC
table!...\n",
- apic, mp_ioapics[apic].mpc_apicid);
- printk(KERN_ERR "... fixing up to %d. (tell your hw vendor)\n",
- reg_00.bits.ID);
- mp_ioapics[apic].mpc_apicid = reg_00.bits.ID;
- }
-
- /* Don't check I/O APIC IDs for some xAPIC systems. They have
- * no meaning without the serial APIC bus. */
- if (NO_IOAPIC_CHECK)
- continue;
- /*
- * Sanity check, is the ID really free? Every APIC in a
- * system must have a unique ID or we get lots of nice
- * 'stuck on smp_invalidate_needed IPI wait' messages.
- */
- if (check_apicid_used(phys_id_present_map,
- mp_ioapics[apic].mpc_apicid)) {
- printk(KERN_ERR "BIOS bug, IO-APIC#%d ID %d is already
used!...\n",
- apic, mp_ioapics[apic].mpc_apicid);
- for (i = 0; i < get_physical_broadcast(); i++)
- if (!physid_isset(i, phys_id_present_map))
- break;
- if (i >= get_physical_broadcast())
- panic("Max APIC ID exceeded!\n");
- printk(KERN_ERR "... fixing up to %d. (tell your hw vendor)\n",
- i);
- physid_set(i, phys_id_present_map);
- mp_ioapics[apic].mpc_apicid = i;
- } else {
- physid_mask_t tmp;
- tmp = apicid_to_cpu_present(mp_ioapics[apic].mpc_apicid);
- apic_printk(APIC_VERBOSE, "Setting %d in the "
- "phys_id_present_map\n",
- mp_ioapics[apic].mpc_apicid);
- physids_or(phys_id_present_map, phys_id_present_map, tmp);
- }
-
-
- /*
- * We need to adjust the IRQ routing table
- * if the ID changed.
- */
- if (old_id != mp_ioapics[apic].mpc_apicid)
- for (i = 0; i < mp_irq_entries; i++)
- if (mp_irqs[i].mpc_dstapic == old_id)
- mp_irqs[i].mpc_dstapic
- = mp_ioapics[apic].mpc_apicid;
-
- /*
- * Read the right value from the MPC table and
- * write it into the ID register.
- */
- apic_printk(APIC_VERBOSE, KERN_INFO
- "...changing IO-APIC physical APIC ID to %d ...",
- mp_ioapics[apic].mpc_apicid);
-
- reg_00.bits.ID = mp_ioapics[apic].mpc_apicid;
- spin_lock_irqsave(&ioapic_lock, flags);
- io_apic_write(apic, 0, reg_00.raw);
- spin_unlock_irqrestore(&ioapic_lock, flags);
-
- /*
- * Sanity check
- */
- spin_lock_irqsave(&ioapic_lock, flags);
- reg_00.raw = io_apic_read(apic, 0);
- spin_unlock_irqrestore(&ioapic_lock, flags);
- if (reg_00.bits.ID != mp_ioapics[apic].mpc_apicid)
- printk("could not set ID!\n");
- else
- apic_printk(APIC_VERBOSE, " ok.\n");
- }
-}
-#else
-static void __init setup_ioapic_ids_from_mpc(void) { }
-#endif
-
-/*
- * There is a nasty bug in some older SMP boards, their mptable lies
- * about the timer IRQ. We do the following to work around the situation:
- *
- * - timer IRQ defaults to IO-APIC IRQ
- * - if this function detects that timer IRQs are defunct, then we fall
- * back to ISA timer IRQs
- */
-static int __init timer_irq_works(void)
-{
- unsigned long t1 = jiffies;
-
- local_irq_enable();
- /* Let ten ticks pass... */
- mdelay((10 * 1000) / HZ);
-
- /*
- * Expect a few ticks at least, to be sure some possible
- * glue logic does not lock up after one or two first
- * ticks in a non-ExtINT mode. Also the local APIC
- * might have cached one ExtINT interrupt. Finally, at
- * least one tick may be lost due to delays.
- */
- if (jiffies - t1 > 4)
- return 1;
-
- return 0;
-}
-
-/*
- * In the SMP+IOAPIC case it might happen that there are an unspecified
- * number of pending IRQ events unhandled. These cases are very rare,
- * so we 'resend' these IRQs via IPIs, to the same CPU. It's much
- * better to do it this way as thus we do not have to be aware of
- * 'pending' interrupts in the IRQ path, except at this point.
- */
-/*
- * Edge triggered needs to resend any interrupt
- * that was delayed but this is now handled in the device
- * independent code.
- */
-
-/*
- * Starting up a edge-triggered IO-APIC interrupt is
- * nasty - we need to make sure that we get the edge.
- * If it is already asserted for some reason, we need
- * return 1 to indicate that is was pending.
- *
- * This is not complete - we should be able to fake
- * an edge even if it isn't on the 8259A...
- */
-static unsigned int startup_edge_ioapic_irq(unsigned int irq)
-{
- int was_pending = 0;
- unsigned long flags;
-
- spin_lock_irqsave(&ioapic_lock, flags);
- if (irq < 16) {
- disable_8259A_irq(irq);
- if (i8259A_irq_pending(irq))
- was_pending = 1;
- }
- __unmask_IO_APIC_irq(irq);
- spin_unlock_irqrestore(&ioapic_lock, flags);
-
- return was_pending;
-}
-
-/*
- * Once we have recorded IRQ_PENDING already, we can mask the
- * interrupt for real. This prevents IRQ storms from unhandled
- * devices.
- */
-static void ack_edge_ioapic_irq(unsigned int irq)
-{
- move_irq(irq);
- if ((irq_desc[irq].status & (IRQ_PENDING | IRQ_DISABLED))
- == (IRQ_PENDING | IRQ_DISABLED))
- mask_IO_APIC_irq(irq);
- ack_APIC_irq();
-}
-
-/*
- * Level triggered interrupts can just be masked,
- * and shutting down and starting up the interrupt
- * is the same as enabling and disabling them -- except
- * with a startup need to return a "was pending" value.
- *
- * Level triggered interrupts are special because we
- * do not touch any IO-APIC register while handling
- * them. We ack the APIC in the end-IRQ handler, not
- * in the start-IRQ-handler. Protection against reentrance
- * from the same interrupt is still provided, both by the
- * generic IRQ layer and by the fact that an unacked local
- * APIC does not accept IRQs.
- */
-static unsigned int startup_level_ioapic_irq (unsigned int irq)
-{
- unmask_IO_APIC_irq(irq);
-
- return 0; /* don't check for pending */
-}
-
-static void end_level_ioapic_irq (unsigned int irq)
-{
- unsigned long v;
- int i;
-
- move_irq(irq);
-/*
- * It appears there is an erratum which affects at least version 0x11
- * of I/O APIC (that's the 82093AA and cores integrated into various
- * chipsets). Under certain conditions a level-triggered interrupt is
- * erroneously delivered as edge-triggered one but the respective IRR
- * bit gets set nevertheless. As a result the I/O unit expects an EOI
- * message but it will never arrive and further interrupts are blocked
- * from the source. The exact reason is so far unknown, but the
- * phenomenon was observed when two consecutive interrupt requests
- * from a given source get delivered to the same CPU and the source is
- * temporarily disabled in between.
- *
- * A workaround is to simulate an EOI message manually. We achieve it
- * by setting the trigger mode to edge and then to level when the edge
- * trigger mode gets detected in the TMR of a local APIC for a
- * level-triggered interrupt. We mask the source for the time of the
- * operation to prevent an edge-triggered interrupt escaping meanwhile.
- * The idea is from Manfred Spraul. --macro
- */
- i = IO_APIC_VECTOR(irq);
-
- v = apic_read(APIC_TMR + ((i & ~0x1f) >> 1));
-
- ack_APIC_irq();
-
- if (!(v & (1 << (i & 0x1f)))) {
- atomic_inc(&irq_mis_count);
- spin_lock(&ioapic_lock);
- __mask_and_edge_IO_APIC_irq(irq);
- __unmask_and_level_IO_APIC_irq(irq);
- spin_unlock(&ioapic_lock);
- }
-}
-
-#ifdef CONFIG_PCI_MSI
-static unsigned int startup_edge_ioapic_vector(unsigned int vector)
-{
- int irq = vector_to_irq(vector);
-
- return startup_edge_ioapic_irq(irq);
-}
-
-static void ack_edge_ioapic_vector(unsigned int vector)
-{
- int irq = vector_to_irq(vector);
-
- ack_edge_ioapic_irq(irq);
-}
-
-static unsigned int startup_level_ioapic_vector (unsigned int vector)
-{
- int irq = vector_to_irq(vector);
-
- return startup_level_ioapic_irq (irq);
-}
-
-static void end_level_ioapic_vector (unsigned int vector)
-{
- int irq = vector_to_irq(vector);
-
- end_level_ioapic_irq(irq);
-}
-
-static void mask_IO_APIC_vector (unsigned int vector)
-{
- int irq = vector_to_irq(vector);
-
- mask_IO_APIC_irq(irq);
-}
-
-static void unmask_IO_APIC_vector (unsigned int vector)
-{
- int irq = vector_to_irq(vector);
-
- unmask_IO_APIC_irq(irq);
-}
-
-static void set_ioapic_affinity_vector (unsigned int vector,
- cpumask_t cpu_mask)
-{
- int irq = vector_to_irq(vector);
-
- set_ioapic_affinity_irq(irq, cpu_mask);
-}
-#endif
-
-/*
- * Level and edge triggered IO-APIC interrupts need different handling,
- * so we use two separate IRQ descriptors. Edge triggered IRQs can be
- * handled with the level-triggered descriptor, but that one has slightly
- * more overhead. Level-triggered interrupts cannot be handled with the
- * edge-triggered handler, without risking IRQ storms and other ugly
- * races.
- */
-static struct hw_interrupt_type ioapic_edge_type = {
- .typename = "IO-APIC-edge",
- .startup = startup_edge_ioapic,
- .shutdown = shutdown_edge_ioapic,
- .enable = enable_edge_ioapic,
- .disable = disable_edge_ioapic,
- .ack = ack_edge_ioapic,
- .end = end_edge_ioapic,
- .set_affinity = set_ioapic_affinity,
-};
-
-static struct hw_interrupt_type ioapic_level_type = {
- .typename = "IO-APIC-level",
- .startup = startup_level_ioapic,
- .shutdown = shutdown_level_ioapic,
- .enable = enable_level_ioapic,
- .disable = disable_level_ioapic,
- .ack = mask_and_ack_level_ioapic,
- .end = end_level_ioapic,
- .set_affinity = set_ioapic_affinity,
-};
-
static inline void init_IO_APIC_traps(void)
{
int irq;
@@ -2017,233 +1253,6 @@ static inline void init_IO_APIC_traps(vo
}
}
-static void enable_lapic_irq (unsigned int irq)
-{
- unsigned long v;
-
- v = apic_read(APIC_LVT0);
- apic_write_around(APIC_LVT0, v & ~APIC_LVT_MASKED);
-}
-
-static void disable_lapic_irq (unsigned int irq)
-{
- unsigned long v;
-
- v = apic_read(APIC_LVT0);
- apic_write_around(APIC_LVT0, v | APIC_LVT_MASKED);
-}
-
-static void ack_lapic_irq (unsigned int irq)
-{
- ack_APIC_irq();
-}
-
-static void end_lapic_irq (unsigned int i) { /* nothing */ }
-
-static struct hw_interrupt_type lapic_irq_type = {
- .typename = "local-APIC-edge",
- .startup = NULL, /* startup_irq() not used for IRQ0 */
- .shutdown = NULL, /* shutdown_irq() not used for IRQ0 */
- .enable = enable_lapic_irq,
- .disable = disable_lapic_irq,
- .ack = ack_lapic_irq,
- .end = end_lapic_irq
-};
-
-static void setup_nmi (void)
-{
- /*
- * Dirty trick to enable the NMI watchdog ...
- * We put the 8259A master into AEOI mode and
- * unmask on all local APICs LVT0 as NMI.
- *
- * The idea to use the 8259A in AEOI mode ('8259A Virtual Wire')
- * is from Maciej W. Rozycki - so we do not have to EOI from
- * the NMI handler or the timer interrupt.
- */
- apic_printk(APIC_VERBOSE, KERN_INFO "activating NMI Watchdog ...");
-
- on_each_cpu(enable_NMI_through_LVT0, NULL, 1, 1);
-
- apic_printk(APIC_VERBOSE, " done.\n");
-}
-
-/*
- * This looks a bit hackish but it's about the only one way of sending
- * a few INTA cycles to 8259As and any associated glue logic. ICR does
- * not support the ExtINT mode, unfortunately. We need to send these
- * cycles as some i82489DX-based boards have glue logic that keeps the
- * 8259A interrupt line asserted until INTA. --macro
- */
-static inline void unlock_ExtINT_logic(void)
-{
- int pin, i;
- struct IO_APIC_route_entry entry0, entry1;
- unsigned char save_control, save_freq_select;
- unsigned long flags;
-
- pin = find_isa_irq_pin(8, mp_INT);
- if (pin == -1)
- return;
-
- spin_lock_irqsave(&ioapic_lock, flags);
- *(((int *)&entry0) + 1) = io_apic_read(0, 0x11 + 2 * pin);
- *(((int *)&entry0) + 0) = io_apic_read(0, 0x10 + 2 * pin);
- spin_unlock_irqrestore(&ioapic_lock, flags);
- clear_IO_APIC_pin(0, pin);
-
- memset(&entry1, 0, sizeof(entry1));
-
- entry1.dest_mode = 0; /* physical delivery */
- entry1.mask = 0; /* unmask IRQ now */
- entry1.dest.physical.physical_dest = hard_smp_processor_id();
- entry1.delivery_mode = dest_ExtINT;
- entry1.polarity = entry0.polarity;
- entry1.trigger = 0;
- entry1.vector = 0;
-
- spin_lock_irqsave(&ioapic_lock, flags);
- io_apic_write(0, 0x11 + 2 * pin, *(((int *)&entry1) + 1));
- io_apic_write(0, 0x10 + 2 * pin, *(((int *)&entry1) + 0));
- spin_unlock_irqrestore(&ioapic_lock, flags);
-
- save_control = CMOS_READ(RTC_CONTROL);
- save_freq_select = CMOS_READ(RTC_FREQ_SELECT);
- CMOS_WRITE((save_freq_select & ~RTC_RATE_SELECT) | 0x6,
- RTC_FREQ_SELECT);
- CMOS_WRITE(save_control | RTC_PIE, RTC_CONTROL);
-
- i = 100;
- while (i-- > 0) {
- mdelay(10);
- if ((CMOS_READ(RTC_INTR_FLAGS) & RTC_PF) == RTC_PF)
- i -= 10;
- }
-
- CMOS_WRITE(save_control, RTC_CONTROL);
- CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT);
- clear_IO_APIC_pin(0, pin);
-
- spin_lock_irqsave(&ioapic_lock, flags);
- io_apic_write(0, 0x11 + 2 * pin, *(((int *)&entry0) + 1));
- io_apic_write(0, 0x10 + 2 * pin, *(((int *)&entry0) + 0));
- spin_unlock_irqrestore(&ioapic_lock, flags);
-}
-
-/*
- * This code may look a bit paranoid, but it's supposed to cooperate with
- * a wide range of boards and BIOS bugs. Fortunately only the timer IRQ
- * is so screwy. Thanks to Brian Perkins for testing/hacking this beast
- * fanatically on his truly buggy board.
- */
-static inline void check_timer(void)
-{
- int pin1, pin2;
- int vector;
-
- /*
- * get/set the timer IRQ vector:
- */
- disable_8259A_irq(0);
- vector = assign_irq_vector(0);
- set_intr_gate(vector, interrupt[0]);
-
- /*
- * Subtle, code in do_timer_interrupt() expects an AEOI
- * mode for the 8259A whenever interrupts are routed
- * through I/O APICs. Also IRQ0 has to be enabled in
- * the 8259A which implies the virtual wire has to be
- * disabled in the local APIC.
- */
- apic_write_around(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT);
- init_8259A(1);
- timer_ack = 1;
- enable_8259A_irq(0);
-
- pin1 = find_isa_irq_pin(0, mp_INT);
- pin2 = find_isa_irq_pin(0, mp_ExtINT);
-
- printk(KERN_INFO "..TIMER: vector=0x%02X pin1=%d pin2=%d\n", vector,
pin1, pin2);
-
- if (pin1 != -1) {
- /*
- * Ok, does IRQ0 through the IOAPIC work?
- */
- unmask_IO_APIC_irq(0);
- if (timer_irq_works()) {
- if (nmi_watchdog == NMI_IO_APIC) {
- disable_8259A_irq(0);
- setup_nmi();
- enable_8259A_irq(0);
- }
- return;
- }
- clear_IO_APIC_pin(0, pin1);
- printk(KERN_ERR "..MP-BIOS bug: 8254 timer not connected to
IO-APIC\n");
- }
-
- printk(KERN_INFO "...trying to set up timer (IRQ0) through the 8259A ...
");
- if (pin2 != -1) {
- printk("\n..... (found pin %d) ...", pin2);
- /*
- * legacy devices should be connected to IO APIC #0
- */
- setup_ExtINT_IRQ0_pin(pin2, vector);
- if (timer_irq_works()) {
- printk("works.\n");
- if (pin1 != -1)
- replace_pin_at_irq(0, 0, pin1, 0, pin2);
- else
- add_pin_to_irq(0, 0, pin2);
- if (nmi_watchdog == NMI_IO_APIC) {
- setup_nmi();
- }
- return;
- }
- /*
- * Cleanup, just in case ...
- */
- clear_IO_APIC_pin(0, pin2);
- }
- printk(" failed.\n");
-
- if (nmi_watchdog == NMI_IO_APIC) {
- printk(KERN_WARNING "timer doesn't work through the IO-APIC -
disabling NMI Watchdog!\n");
- nmi_watchdog = 0;
- }
-
- printk(KERN_INFO "...trying to set up timer as Virtual Wire
IRQ...");
-
- disable_8259A_irq(0);
- irq_desc[0].handler = &lapic_irq_type;
- apic_write_around(APIC_LVT0, APIC_DM_FIXED | vector); /* Fixed mode */
- enable_8259A_irq(0);
-
- if (timer_irq_works()) {
- printk(" works.\n");
- return;
- }
- apic_write_around(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_FIXED | vector);
- printk(" failed.\n");
-
- printk(KERN_INFO "...trying to set up timer as ExtINT IRQ...");
-
- timer_ack = 0;
- init_8259A(0);
- make_8259A_irq(0);
- apic_write_around(APIC_LVT0, APIC_DM_EXTINT);
-
- unlock_ExtINT_logic();
-
- if (timer_irq_works()) {
- printk(" works.\n");
- return;
- }
- printk(" failed :(.\n");
- panic("IO-APIC + timer doesn't work! Boot with apic=debug and send a
"
- "report. Then try booting with the 'noapic' option");
-}
-
/*
*
* IRQ's that are handled by the PIC in the MPS IOAPIC case.
@@ -2389,79 +1398,6 @@ device_initcall(ioapic_init_sysfs);
#ifdef CONFIG_ACPI_BOOT
-int __init io_apic_get_unique_id (int ioapic, int apic_id)
-{
- union IO_APIC_reg_00 reg_00;
- static physid_mask_t apic_id_map = PHYSID_MASK_NONE;
- physid_mask_t tmp;
- unsigned long flags;
- int i = 0;
-
- /*
- * The P4 platform supports up to 256 APIC IDs on two separate APIC
- * buses (one for LAPICs, one for IOAPICs), where predecessors only
- * supports up to 16 on one shared APIC bus.
- *
- * TBD: Expand LAPIC/IOAPIC support on P4-class systems to take full
- * advantage of new APIC bus architecture.
- */
-
- if (physids_empty(apic_id_map))
- apic_id_map = ioapic_phys_id_map(phys_cpu_present_map);
-
- spin_lock_irqsave(&ioapic_lock, flags);
- reg_00.raw = io_apic_read(ioapic, 0);
- spin_unlock_irqrestore(&ioapic_lock, flags);
-
- if (apic_id >= get_physical_broadcast()) {
- printk(KERN_WARNING "IOAPIC[%d]: Invalid apic_id %d, trying "
- "%d\n", ioapic, apic_id, reg_00.bits.ID);
- apic_id = reg_00.bits.ID;
- }
-
- /*
- * Every APIC in a system must have a unique ID or we get lots of nice
- * 'stuck on smp_invalidate_needed IPI wait' messages.
- */
- if (check_apicid_used(apic_id_map, apic_id)) {
-
- for (i = 0; i < get_physical_broadcast(); i++) {
- if (!check_apicid_used(apic_id_map, i))
- break;
- }
-
- if (i == get_physical_broadcast())
- panic("Max apic_id exceeded!\n");
-
- printk(KERN_WARNING "IOAPIC[%d]: apic_id %d already used, "
- "trying %d\n", ioapic, apic_id, i);
-
- apic_id = i;
- }
-
- tmp = apicid_to_cpu_present(apic_id);
- physids_or(apic_id_map, apic_id_map, tmp);
-
- if (reg_00.bits.ID != apic_id) {
- reg_00.bits.ID = apic_id;
-
- spin_lock_irqsave(&ioapic_lock, flags);
- io_apic_write(ioapic, 0, reg_00.raw);
- reg_00.raw = io_apic_read(ioapic, 0);
- spin_unlock_irqrestore(&ioapic_lock, flags);
-
- /* Sanity check */
- if (reg_00.bits.ID != apic_id)
- panic("IOAPIC[%d]: Unable change apic_id!\n", ioapic);
- }
-
- apic_printk(APIC_VERBOSE, KERN_INFO
- "IOAPIC[%d]: Assigned apic_id %d\n", ioapic, apic_id);
-
- return apic_id;
-}
-
-
int __init io_apic_get_version (int ioapic)
{
union IO_APIC_reg_01 reg_01;
diff -purN -X /home/mbligh/.diff.exclude virgin/arch/i386/mach-default/apic.c
io_apic_split/arch/i386/mach-default/apic.c
--- virgin/arch/i386/mach-default/apic.c 1969-12-31 16:00:00.000000000 -0800
+++ io_apic_split/arch/i386/mach-default/apic.c 2005-08-08 16:02:55.803335544
-0700
@@ -0,0 +1,57 @@
+#include <linux/config.h>
+#include <linux/init.h>
+
+#include <linux/mm.h>
+#include <linux/irq.h>
+#include <linux/delay.h>
+#include <linux/bootmem.h>
+#include <linux/smp_lock.h>
+#include <linux/interrupt.h>
+#include <linux/mc146818rtc.h>
+#include <linux/kernel_stat.h>
+#include <linux/sysdev.h>
+
+#include <asm/atomic.h>
+#include <asm/smp.h>
+#include <asm/mtrr.h>
+#include <asm/mpspec.h>
+#include <asm/desc.h>
+#include <asm/arch_hooks.h>
+#include <asm/hpet.h>
+
+#include <mach_apic.h>
+
+#include "io_ports.h"
+
+void disconnect_bsp_APIC(void)
+{
+ if (pic_mode) {
+ /*
+ * Put the board back into PIC mode (has an effect
+ * only on certain older boards). Note that APIC
+ * interrupts, including IPIs, won't work beyond
+ * this point! The only exception are INIT IPIs.
+ */
+ apic_printk(APIC_VERBOSE, "disabling APIC mode, "
+ "entering PIC mode.\n");
+ outb(0x70, 0x22);
+ outb(0x00, 0x23);
+ }
+}
+
+void __init sync_Arb_IDs(void)
+{
+ /* Unsupported on P4 - see Intel Dev. Manual Vol. 3, Ch. 8.6.1 */
+ unsigned int ver = GET_APIC_VERSION(apic_read(APIC_LVR));
+ if (ver >= 0x14) /* P4 or higher */
+ return;
+ /*
+ * Wait for idle.
+ */
+ apic_wait_icr_idle();
+
+ apic_printk(APIC_DEBUG, "Synchronizing Arb IDs.\n");
+ apic_write_around(APIC_ICR, APIC_DEST_ALLINC | APIC_INT_LEVELTRIG
+ | APIC_DM_INIT);
+}
+
diff -purN -X /home/mbligh/.diff.exclude virgin/arch/i386/mach-default/io_apic.c
io_apic_split/arch/i386/mach-default/io_apic.c
--- virgin/arch/i386/mach-default/io_apic.c 1969-12-31 16:00:00.000000000 -0800
+++ io_apic_split/arch/i386/mach-default/io_apic.c 2005-08-08 16:23:20.275187528
-0700
@@ -0,0 +1,1106 @@
+/*
+ * Intel IO-APIC support for multi-Pentium hosts.
+ *
+ * Copyright (C) 1997, 1998, 1999, 2000 Ingo Molnar, Hajnalka Szabo
+ *
+ * Many thanks to Stig Venaas for trying out countless experimental
+ * patches and reporting/debugging problems patiently!
+ *
+ * (c) 1999, Multiple IO-APIC support, developed by
+ * Ken-ichi Yaku <yaku@css1.kbnes.nec.co.jp> and
+ * Hidemi Kishimoto <kisimoto@css1.kbnes.nec.co.jp>,
+ * further tested and cleaned up by Zach Brown <zab@redhat.com>
+ * and Ingo Molnar <mingo@redhat.com>
+ *
+ * Fixes
+ * Maciej W. Rozycki : Bits for genuine 82489DX APICs;
+ * thanks to Eric Gilmore
+ * and Rolf G. Tews
+ * for testing these extensively
+ * Paul Diefenbaugh : Added full ACPI support
+ */
+
+#include <linux/mm.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/sched.h>
+#include <linux/config.h>
+#include <linux/smp_lock.h>
+#include <linux/mc146818rtc.h>
+#include <linux/compiler.h>
+#include <linux/acpi.h>
+
+#include <linux/sysdev.h>
+#include <asm/io.h>
+#include <asm/smp.h>
+#include <asm/desc.h>
+#include <asm/timer.h>
+
+#include <mach_apic.h>
+
+#include "io_ports.h"
+
+/*
+ * Reroute an IRQ to a different pin.
+ */
+static void __init replace_pin_at_irq(unsigned int irq,
+ int oldapic, int oldpin,
+ int newapic, int newpin)
+{
+ struct irq_pin_list *entry = irq_2_pin + irq;
+
+ while (1) {
+ if (entry->apic == oldapic && entry->pin == oldpin) {
+ entry->apic = newapic;
+ entry->pin = newpin;
+ }
+ if (!entry->next)
+ break;
+ entry = irq_2_pin + entry->next;
+ }
+}
+
+static void __modify_IO_APIC_irq (unsigned int irq, unsigned long enable,
unsigned long disable)
+{
+ struct irq_pin_list *entry = irq_2_pin + irq;
+ unsigned int pin, reg;
+
+ for (;;) {
+ pin = entry->pin;
+ if (pin == -1)
+ break;
+ reg = io_apic_read(entry->apic, 0x10 + pin*2);
+ reg &= ~disable;
+ reg |= enable;
+ io_apic_modify(entry->apic, 0x10 + pin*2, reg);
+ if (!entry->next)
+ break;
+ entry = irq_2_pin + entry->next;
+ }
+}
+
+/* mask = 1 */
+static void __mask_IO_APIC_irq (unsigned int irq)
+{
+ __modify_IO_APIC_irq(irq, 0x00010000, 0);
+}
+
+/* mask = 0 */
+static void __unmask_IO_APIC_irq (unsigned int irq)
+{
+ __modify_IO_APIC_irq(irq, 0, 0x00010000);
+}
+
+/* mask = 1, trigger = 0 */
+static void __mask_and_edge_IO_APIC_irq (unsigned int irq)
+{
+ __modify_IO_APIC_irq(irq, 0x00010000, 0x00008000);
+}
+
+/* mask = 0, trigger = 1 */
+static void __unmask_and_level_IO_APIC_irq (unsigned int irq)
+{
+ __modify_IO_APIC_irq(irq, 0x00008000, 0x00010000);
+}
+
+static void mask_IO_APIC_irq (unsigned int irq)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&ioapic_lock, flags);
+ __mask_IO_APIC_irq(irq);
+ spin_unlock_irqrestore(&ioapic_lock, flags);
+}
+
+static void unmask_IO_APIC_irq (unsigned int irq)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&ioapic_lock, flags);
+ __unmask_IO_APIC_irq(irq);
+ spin_unlock_irqrestore(&ioapic_lock, flags);
+}
+
+static void clear_IO_APIC_pin(unsigned int apic, unsigned int pin)
+{
+ struct IO_APIC_route_entry entry;
+ unsigned long flags;
+
+ /* Check delivery_mode to be sure we're not clearing an SMI pin */
+ spin_lock_irqsave(&ioapic_lock, flags);
+ *(((int*)&entry) + 0) = io_apic_read(apic, 0x10 + 2 * pin);
+ *(((int*)&entry) + 1) = io_apic_read(apic, 0x11 + 2 * pin);
+ spin_unlock_irqrestore(&ioapic_lock, flags);
+ if (entry.delivery_mode == dest_SMI)
+ return;
+
+ /*
+ * Disable it in the IO-APIC irq-routing table:
+ */
+ memset(&entry, 0, sizeof(entry));
+ entry.mask = 1;
+ spin_lock_irqsave(&ioapic_lock, flags);
+ io_apic_write(apic, 0x10 + 2 * pin, *(((int *)&entry) + 0));
+ io_apic_write(apic, 0x11 + 2 * pin, *(((int *)&entry) + 1));
+ spin_unlock_irqrestore(&ioapic_lock, flags);
+}
+
+static void clear_IO_APIC (void)
+{
+ int apic, pin;
+
+ for (apic = 0; apic < nr_ioapics; apic++)
+ for (pin = 0; pin < nr_ioapic_registers[apic]; pin++)
+ clear_IO_APIC_pin(apic, pin);
+}
+
+static void set_ioapic_affinity_irq(unsigned int irq, cpumask_t cpumask)
+{
+ unsigned long flags;
+ int pin;
+ struct irq_pin_list *entry = irq_2_pin + irq;
+ unsigned int apicid_value;
+
+ apicid_value = cpu_mask_to_apicid(cpumask);
+ /* Prepare to do the io_apic_write */
+ apicid_value = apicid_value << 24;
+ spin_lock_irqsave(&ioapic_lock, flags);
+ for (;;) {
+ pin = entry->pin;
+ if (pin == -1)
+ break;
+ io_apic_write(entry->apic, 0x10 + 1 + pin*2, apicid_value);
+ if (!entry->next)
+ break;
+ entry = irq_2_pin + entry->next;
+ }
+ spin_unlock_irqrestore(&ioapic_lock, flags);
+}
+
+#ifndef CONFIG_SMP
+void fastcall send_IPI_self(int vector)
+{
+ unsigned int cfg;
+
+ /*
+ * Wait for idle.
+ */
+ apic_wait_icr_idle();
+ cfg = APIC_DM_FIXED | APIC_DEST_SELF | vector | APIC_DEST_LOGICAL;
+ /*
+ * Send the IPI. The write to APIC_ICR fires this off.
+ */
+ apic_write_around(APIC_ICR, cfg);
+}
+#endif /* !CONFIG_SMP */
+
+/*
+ * Find the pin to which IRQ[irq] (ISA) is connected
+ */
+static int find_isa_irq_pin(int irq, int type)
+{
+ int i;
+
+ for (i = 0; i < mp_irq_entries; i++) {
+ int lbus = mp_irqs[i].mpc_srcbus;
+
+ if ((mp_bus_id_to_type[lbus] == MP_BUS_ISA ||
+ mp_bus_id_to_type[lbus] == MP_BUS_EISA ||
+ mp_bus_id_to_type[lbus] == MP_BUS_MCA ||
+ mp_bus_id_to_type[lbus] == MP_BUS_NEC98
+ ) &&
+ (mp_irqs[i].mpc_irqtype == type) &&
+ (mp_irqs[i].mpc_srcbusirq == irq))
+
+ return mp_irqs[i].mpc_dstirq;
+ }
+ return -1;
+}
+
+/*
+ * This function currently is only a helper for the i386 smp boot process where
+ * we need to reprogram the ioredtbls to cater for the cpus which have come
online
+ * so mask in all cases should simply be TARGET_CPUS
+ */
+void __init setup_ioapic_dest(void)
+{
+ int pin, ioapic, irq, irq_entry;
+
+ if (skip_ioapic_setup == 1)
+ return;
+
+ for (ioapic = 0; ioapic < nr_ioapics; ioapic++) {
+ for (pin = 0; pin < nr_ioapic_registers[ioapic]; pin++) {
+ irq_entry = find_irq_entry(ioapic, pin, mp_INT);
+ if (irq_entry == -1)
+ continue;
+ irq = pin_2_irq(irq_entry, ioapic, pin);
+ set_ioapic_affinity_irq(irq, TARGET_CPUS);
+ }
+
+ }
+}
+
+static struct hw_interrupt_type ioapic_level_type;
+static struct hw_interrupt_type ioapic_edge_type;
+
+#define IOAPIC_AUTO -1
+#define IOAPIC_EDGE 0
+#define IOAPIC_LEVEL 1
+
+static inline void ioapic_register_intr(int irq, int vector, unsigned long
trigger)
+{
+ if (use_pci_vector() && !platform_legacy_irq(irq)) {
+ if ((trigger == IOAPIC_AUTO && IO_APIC_irq_trigger(irq)) ||
+ trigger == IOAPIC_LEVEL)
+ irq_desc[vector].handler = &ioapic_level_type;
+ else
+ irq_desc[vector].handler = &ioapic_edge_type;
+ set_intr_gate(vector, interrupt[vector]);
+ } else {
+ if ((trigger == IOAPIC_AUTO && IO_APIC_irq_trigger(irq)) ||
+ trigger == IOAPIC_LEVEL)
+ irq_desc[irq].handler = &ioapic_level_type;
+ else
+ irq_desc[irq].handler = &ioapic_edge_type;
+ set_intr_gate(vector, interrupt[irq]);
+ }
+}
+
+/*
+ * Set up the 8259A-master output pin:
+ */
+static void __init setup_ExtINT_IRQ0_pin(unsigned int pin, int vector)
+{
+ struct IO_APIC_route_entry entry;
+ unsigned long flags;
+
+ memset(&entry,0,sizeof(entry));
+
+ disable_8259A_irq(0);
+
+ /* mask LVT0 */
+ apic_write_around(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT);
+
+ /*
+ * We use logical delivery to get the timer IRQ
+ * to the first CPU.
+ */
+ entry.dest_mode = INT_DEST_MODE;
+ entry.mask = 0; /* unmask IRQ now */
+ entry.dest.logical.logical_dest = cpu_mask_to_apicid(TARGET_CPUS);
+ entry.delivery_mode = INT_DELIVERY_MODE;
+ entry.polarity = 0;
+ entry.trigger = 0;
+ entry.vector = vector;
+
+ /*
+ * The timer IRQ doesn't have to know that behind the
+ * scene we have a 8259A-master in AEOI mode ...
+ */
+ irq_desc[0].handler = &ioapic_edge_type;
+
+ /*
+ * Add it to the IO-APIC irq-routing table:
+ */
+ spin_lock_irqsave(&ioapic_lock, flags);
+ io_apic_write(0, 0x11+2*pin, *(((int *)&entry)+1));
+ io_apic_write(0, 0x10+2*pin, *(((int *)&entry)+0));
+ spin_unlock_irqrestore(&ioapic_lock, flags);
+
+ enable_8259A_irq(0);
+}
+
+static inline void UNEXPECTED_IO_APIC(void)
+{
+}
+
+void __init print_IO_APIC(void)
+{
+ int apic, i;
+ union IO_APIC_reg_00 reg_00;
+ union IO_APIC_reg_01 reg_01;
+ union IO_APIC_reg_02 reg_02;
+ union IO_APIC_reg_03 reg_03;
+ unsigned long flags;
+
+ if (apic_verbosity == APIC_QUIET)
+ return;
+
+ printk(KERN_DEBUG "number of MP IRQ sources: %d.\n",
mp_irq_entries);
+ for (i = 0; i < nr_ioapics; i++)
+ printk(KERN_DEBUG "number of IO-APIC #%d registers: %d.\n",
+ mp_ioapics[i].mpc_apicid, nr_ioapic_registers[i]);
+
+ /*
+ * We are a bit conservative about what we expect. We have to
+ * know about every hardware change ASAP.
+ */
+ printk(KERN_INFO "testing the IO APIC.......................\n");
+
+ for (apic = 0; apic < nr_ioapics; apic++) {
+
+ spin_lock_irqsave(&ioapic_lock, flags);
+ reg_00.raw = io_apic_read(apic, 0);
+ reg_01.raw = io_apic_read(apic, 1);
+ if (reg_01.bits.version >= 0x10)
+ reg_02.raw = io_apic_read(apic, 2);
+ if (reg_01.bits.version >= 0x20)
+ reg_03.raw = io_apic_read(apic, 3);
+ spin_unlock_irqrestore(&ioapic_lock, flags);
+
+ printk(KERN_DEBUG "IO APIC #%d......\n",
mp_ioapics[apic].mpc_apicid);
+ printk(KERN_DEBUG ".... register #00: %08X\n", reg_00.raw);
+ printk(KERN_DEBUG "....... : physical APIC id: %02X\n",
reg_00.bits.ID);
+ printk(KERN_DEBUG "....... : Delivery Type: %X\n",
reg_00.bits.delivery_type);
+ printk(KERN_DEBUG "....... : LTS : %X\n",
reg_00.bits.LTS);
+ if (reg_00.bits.ID >= get_physical_broadcast())
+ UNEXPECTED_IO_APIC();
+ if (reg_00.bits.__reserved_1 || reg_00.bits.__reserved_2)
+ UNEXPECTED_IO_APIC();
+
+ printk(KERN_DEBUG ".... register #01: %08X\n", reg_01.raw);
+ printk(KERN_DEBUG "....... : max redirection entries: %04X\n",
reg_01.bits.entries);
+ if ( (reg_01.bits.entries != 0x0f) && /* older (Neptune) boards */
+ (reg_01.bits.entries != 0x17) && /* typical ISA+PCI boards */
+ (reg_01.bits.entries != 0x1b) && /* Compaq Proliant boards */
+ (reg_01.bits.entries != 0x1f) && /* dual Xeon boards */
+ (reg_01.bits.entries != 0x22) && /* bigger Xeon boards */
+ (reg_01.bits.entries != 0x2E) &&
+ (reg_01.bits.entries != 0x3F)
+ )
+ UNEXPECTED_IO_APIC();
+
+ printk(KERN_DEBUG "....... : PRQ implemented: %X\n",
reg_01.bits.PRQ);
+ printk(KERN_DEBUG "....... : IO APIC version: %04X\n",
reg_01.bits.version);
+ if ( (reg_01.bits.version != 0x01) && /* 82489DX IO-APICs */
+ (reg_01.bits.version != 0x10) && /* oldest IO-APICs */
+ (reg_01.bits.version != 0x11) && /* Pentium/Pro IO-APICs */
+ (reg_01.bits.version != 0x13) && /* Xeon IO-APICs */
+ (reg_01.bits.version != 0x20) /* Intel P64H (82806 AA) */
+ )
+ UNEXPECTED_IO_APIC();
+ if (reg_01.bits.__reserved_1 || reg_01.bits.__reserved_2)
+ UNEXPECTED_IO_APIC();
+
+ /*
+ * Some Intel chipsets with IO APIC VERSION of 0x1? don't have reg_02,
+ * but the value of reg_02 is read as the previous read register
+ * value, so ignore it if reg_02 == reg_01.
+ */
+ if (reg_01.bits.version >= 0x10 && reg_02.raw != reg_01.raw) {
+ printk(KERN_DEBUG ".... register #02: %08X\n", reg_02.raw);
+ printk(KERN_DEBUG "....... : arbitration: %02X\n",
reg_02.bits.arbitration);
+ if (reg_02.bits.__reserved_1 || reg_02.bits.__reserved_2)
+ UNEXPECTED_IO_APIC();
+ }
+
+ /*
+ * Some Intel chipsets with IO APIC VERSION of 0x2? don't have reg_02
+ * or reg_03, but the value of reg_0[23] is read as the previous read
+ * register value, so ignore it if reg_03 == reg_0[12].
+ */
+ if (reg_01.bits.version >= 0x20 && reg_03.raw != reg_02.raw
&&
+ reg_03.raw != reg_01.raw) {
+ printk(KERN_DEBUG ".... register #03: %08X\n", reg_03.raw);
+ printk(KERN_DEBUG "....... : Boot DT : %X\n",
reg_03.bits.boot_DT);
+ if (reg_03.bits.__reserved_1)
+ UNEXPECTED_IO_APIC();
+ }
+
+ printk(KERN_DEBUG ".... IRQ redirection table:\n");
+
+ printk(KERN_DEBUG " NR Log Phy Mask Trig IRR Pol"
+ " Stat Dest Deli Vect: \n");
+
+ for (i = 0; i <= reg_01.bits.entries; i++) {
+ struct IO_APIC_route_entry entry;
+
+ spin_lock_irqsave(&ioapic_lock, flags);
+ *(((int *)&entry)+0) = io_apic_read(apic, 0x10+i*2);
+ *(((int *)&entry)+1) = io_apic_read(apic, 0x11+i*2);
+ spin_unlock_irqrestore(&ioapic_lock, flags);
+
+ printk(KERN_DEBUG " %02x %03X %02X ",
+ i,
+ entry.dest.logical.logical_dest,
+ entry.dest.physical.physical_dest
+ );
+
+ printk("%1d %1d %1d %1d %1d %1d %1d %02X\n",
+ entry.mask,
+ entry.trigger,
+ entry.irr,
+ entry.polarity,
+ entry.delivery_status,
+ entry.dest_mode,
+ entry.delivery_mode,
+ entry.vector
+ );
+ }
+ }
+ if (use_pci_vector())
+ printk(KERN_INFO "Using vector-based indexing\n");
+ printk(KERN_DEBUG "IRQ to pin mappings:\n");
+ for (i = 0; i < NR_IRQS; i++) {
+ struct irq_pin_list *entry = irq_2_pin + i;
+ if (entry->pin < 0)
+ continue;
+ if (use_pci_vector() && !platform_legacy_irq(i))
+ printk(KERN_DEBUG "IRQ%d ", IO_APIC_VECTOR(i));
+ else
+ printk(KERN_DEBUG "IRQ%d ", i);
+ for (;;) {
+ printk("-> %d:%d", entry->apic, entry->pin);
+ if (!entry->next)
+ break;
+ entry = irq_2_pin + entry->next;
+ }
+ printk("\n");
+ }
+
+ printk(KERN_INFO ".................................... done.\n");
+
+ return;
+}
+
+/*
+ * function to set the IO-APIC physical IDs based on the
+ * values stored in the MPC table.
+ *
+ * by Matt Domsch <Matt_Domsch@dell.com> Tue Dec 21 12:25:05 CST 1999
+ */
+
+#ifdef CONFIG_X86_NUMAQ
+static void __init setup_ioapic_ids_from_mpc(void) { }
+#else
+static void __init setup_ioapic_ids_from_mpc(void)
+{
+ union IO_APIC_reg_00 reg_00;
+ physid_mask_t phys_id_present_map;
+ int apic;
+ int i;
+ unsigned char old_id;
+ unsigned long flags;
+
+ /*
+ * This is broken; anything with a real cpu count has to
+ * circumvent this idiocy regardless.
+ */
+ phys_id_present_map = ioapic_phys_id_map(phys_cpu_present_map);
+
+ /*
+ * Set the IOAPIC ID to the value stored in the MPC table.
+ */
+ for (apic = 0; apic < nr_ioapics; apic++) {
+
+ /* Read the register 0 value */
+ spin_lock_irqsave(&ioapic_lock, flags);
+ reg_00.raw = io_apic_read(apic, 0);
+ spin_unlock_irqrestore(&ioapic_lock, flags);
+
+ old_id = mp_ioapics[apic].mpc_apicid;
+
+ if (mp_ioapics[apic].mpc_apicid >= get_physical_broadcast()) {
+ printk(KERN_ERR "BIOS bug, IO-APIC#%d ID is %d in the MPC
table!...\n",
+ apic, mp_ioapics[apic].mpc_apicid);
+ printk(KERN_ERR "... fixing up to %d. (tell your hw vendor)\n",
+ reg_00.bits.ID);
+ mp_ioapics[apic].mpc_apicid = reg_00.bits.ID;
+ }
+
+ /* Don't check I/O APIC IDs for some xAPIC systems. They have
+ * no meaning without the serial APIC bus. */
+ if (NO_IOAPIC_CHECK)
+ continue;
+ /*
+ * Sanity check, is the ID really free? Every APIC in a
+ * system must have a unique ID or we get lots of nice
+ * 'stuck on smp_invalidate_needed IPI wait' messages.
+ */
+ if (check_apicid_used(phys_id_present_map,
+ mp_ioapics[apic].mpc_apicid)) {
+ printk(KERN_ERR "BIOS bug, IO-APIC#%d ID %d is already
used!...\n",
+ apic, mp_ioapics[apic].mpc_apicid);
+ for (i = 0; i < get_physical_broadcast(); i++)
+ if (!physid_isset(i, phys_id_present_map))
+ break;
+ if (i >= get_physical_broadcast())
+ panic("Max APIC ID exceeded!\n");
+ printk(KERN_ERR "... fixing up to %d. (tell your hw vendor)\n",
+ i);
+ physid_set(i, phys_id_present_map);
+ mp_ioapics[apic].mpc_apicid = i;
+ } else {
+ physid_mask_t tmp;
+ tmp = apicid_to_cpu_present(mp_ioapics[apic].mpc_apicid);
+ apic_printk(APIC_VERBOSE, "Setting %d in the "
+ "phys_id_present_map\n",
+ mp_ioapics[apic].mpc_apicid);
+ physids_or(phys_id_present_map, phys_id_present_map, tmp);
+ }
+
+
+ /*
+ * We need to adjust the IRQ routing table
+ * if the ID changed.
+ */
+ if (old_id != mp_ioapics[apic].mpc_apicid)
+ for (i = 0; i < mp_irq_entries; i++)
+ if (mp_irqs[i].mpc_dstapic == old_id)
+ mp_irqs[i].mpc_dstapic
+ = mp_ioapics[apic].mpc_apicid;
+
+ /*
+ * Read the right value from the MPC table and
+ * write it into the ID register.
+ */
+ apic_printk(APIC_VERBOSE, KERN_INFO
+ "...changing IO-APIC physical APIC ID to %d ...",
+ mp_ioapics[apic].mpc_apicid);
+
+ reg_00.bits.ID = mp_ioapics[apic].mpc_apicid;
+ spin_lock_irqsave(&ioapic_lock, flags);
+ io_apic_write(apic, 0, reg_00.raw);
+ spin_unlock_irqrestore(&ioapic_lock, flags);
+
+ /*
+ * Sanity check
+ */
+ spin_lock_irqsave(&ioapic_lock, flags);
+ reg_00.raw = io_apic_read(apic, 0);
+ spin_unlock_irqrestore(&ioapic_lock, flags);
+ if (reg_00.bits.ID != mp_ioapics[apic].mpc_apicid)
+ printk("could not set ID!\n");
+ else
+ apic_printk(APIC_VERBOSE, " ok.\n");
+ }
+}
+#endif /* !CONFIG_NUMAQ */
+
+/*
+ * There is a nasty bug in some older SMP boards, their mptable lies
+ * about the timer IRQ. We do the following to work around the situation:
+ *
+ * - timer IRQ defaults to IO-APIC IRQ
+ * - if this function detects that timer IRQs are defunct, then we fall
+ * back to ISA timer IRQs
+ */
+static int __init timer_irq_works(void)
+{
+ unsigned long t1 = jiffies;
+
+ local_irq_enable();
+ /* Let ten ticks pass... */
+ mdelay((10 * 1000) / HZ);
+
+ /*
+ * Expect a few ticks at least, to be sure some possible
+ * glue logic does not lock up after one or two first
+ * ticks in a non-ExtINT mode. Also the local APIC
+ * might have cached one ExtINT interrupt. Finally, at
+ * least one tick may be lost due to delays.
+ */
+ if (jiffies - t1 > 4)
+ return 1;
+
+ return 0;
+}
+
+/*
+ * In the SMP+IOAPIC case it might happen that there are an unspecified
+ * number of pending IRQ events unhandled. These cases are very rare,
+ * so we 'resend' these IRQs via IPIs, to the same CPU. It's much
+ * better to do it this way as thus we do not have to be aware of
+ * 'pending' interrupts in the IRQ path, except at this point.
+ */
+/*
+ * Edge triggered needs to resend any interrupt
+ * that was delayed but this is now handled in the device
+ * independent code.
+ */
+
+/*
+ * Starting up a edge-triggered IO-APIC interrupt is
+ * nasty - we need to make sure that we get the edge.
+ * If it is already asserted for some reason, we need
+ * return 1 to indicate that is was pending.
+ *
+ * This is not complete - we should be able to fake
+ * an edge even if it isn't on the 8259A...
+ */
+static unsigned int startup_edge_ioapic_irq(unsigned int irq)
+{
+ int was_pending = 0;
+ unsigned long flags;
+
+ spin_lock_irqsave(&ioapic_lock, flags);
+ if (irq < 16) {
+ disable_8259A_irq(irq);
+ if (i8259A_irq_pending(irq))
+ was_pending = 1;
+ }
+ __unmask_IO_APIC_irq(irq);
+ spin_unlock_irqrestore(&ioapic_lock, flags);
+
+ return was_pending;
+}
+
+/*
+ * Once we have recorded IRQ_PENDING already, we can mask the
+ * interrupt for real. This prevents IRQ storms from unhandled
+ * devices.
+ */
+static void ack_edge_ioapic_irq(unsigned int irq)
+{
+ move_irq(irq);
+ if ((irq_desc[irq].status & (IRQ_PENDING | IRQ_DISABLED))
+ == (IRQ_PENDING | IRQ_DISABLED))
+ mask_IO_APIC_irq(irq);
+ ack_APIC_irq();
+}
+
+/*
+ * Level triggered interrupts can just be masked,
+ * and shutting down and starting up the interrupt
+ * is the same as enabling and disabling them -- except
+ * with a startup need to return a "was pending" value.
+ *
+ * Level triggered interrupts are special because we
+ * do not touch any IO-APIC register while handling
+ * them. We ack the APIC in the end-IRQ handler, not
+ * in the start-IRQ-handler. Protection against reentrance
+ * from the same interrupt is still provided, both by the
+ * generic IRQ layer and by the fact that an unacked local
+ * APIC does not accept IRQs.
+ */
+static unsigned int startup_level_ioapic_irq (unsigned int irq)
+{
+ unmask_IO_APIC_irq(irq);
+
+ return 0; /* don't check for pending */
+}
+
+static void end_level_ioapic_irq (unsigned int irq)
+{
+ unsigned long v;
+ int i;
+
+ move_irq(irq);
+/*
+ * It appears there is an erratum which affects at least version 0x11
+ * of I/O APIC (that's the 82093AA and cores integrated into various
+ * chipsets). Under certain conditions a level-triggered interrupt is
+ * erroneously delivered as edge-triggered one but the respective IRR
+ * bit gets set nevertheless. As a result the I/O unit expects an EOI
+ * message but it will never arrive and further interrupts are blocked
+ * from the source. The exact reason is so far unknown, but the
+ * phenomenon was observed when two consecutive interrupt requests
+ * from a given source get delivered to the same CPU and the source is
+ * temporarily disabled in between.
+ *
+ * A workaround is to simulate an EOI message manually. We achieve it
+ * by setting the trigger mode to edge and then to level when the edge
+ * trigger mode gets detected in the TMR of a local APIC for a
+ * level-triggered interrupt. We mask the source for the time of the
+ * operation to prevent an edge-triggered interrupt escaping meanwhile.
+ * The idea is from Manfred Spraul. --macro
+ */
+ i = IO_APIC_VECTOR(irq);
+
+ v = apic_read(APIC_TMR + ((i & ~0x1f) >> 1));
+
+ ack_APIC_irq();
+
+ if (!(v & (1 << (i & 0x1f)))) {
+ atomic_inc(&irq_mis_count);
+ spin_lock(&ioapic_lock);
+ __mask_and_edge_IO_APIC_irq(irq);
+ __unmask_and_level_IO_APIC_irq(irq);
+ spin_unlock(&ioapic_lock);
+ }
+}
+
+#ifdef CONFIG_PCI_MSI
+static unsigned int startup_edge_ioapic_vector(unsigned int vector)
+{
+ int irq = vector_to_irq(vector);
+
+ return startup_edge_ioapic_irq(irq);
+}
+
+static void ack_edge_ioapic_vector(unsigned int vector)
+{
+ int irq = vector_to_irq(vector);
+
+ ack_edge_ioapic_irq(irq);
+}
+
+static unsigned int startup_level_ioapic_vector (unsigned int vector)
+{
+ int irq = vector_to_irq(vector);
+
+ return startup_level_ioapic_irq (irq);
+}
+
+static void end_level_ioapic_vector (unsigned int vector)
+{
+ int irq = vector_to_irq(vector);
+
+ end_level_ioapic_irq(irq);
+}
+
+static void mask_IO_APIC_vector (unsigned int vector)
+{
+ int irq = vector_to_irq(vector);
+
+ mask_IO_APIC_irq(irq);
+}
+
+static void unmask_IO_APIC_vector (unsigned int vector)
+{
+ int irq = vector_to_irq(vector);
+
+ unmask_IO_APIC_irq(irq);
+}
+
+static void set_ioapic_affinity_vector (unsigned int vector,
+ cpumask_t cpu_mask)
+{
+ int irq = vector_to_irq(vector);
+
+ set_ioapic_affinity_irq(irq, cpu_mask);
+}
+#endif
+
+/*
+ * Level and edge triggered IO-APIC interrupts need different handling,
+ * so we use two separate IRQ descriptors. Edge triggered IRQs can be
+ * handled with the level-triggered descriptor, but that one has slightly
+ * more overhead. Level-triggered interrupts cannot be handled with the
+ * edge-triggered handler, without risking IRQ storms and other ugly
+ * races.
+ */
+static struct hw_interrupt_type ioapic_edge_type = {
+ .typename = "IO-APIC-edge",
+ .startup = startup_edge_ioapic,
+ .shutdown = shutdown_edge_ioapic,
+ .enable = enable_edge_ioapic,
+ .disable = disable_edge_ioapic,
+ .ack = ack_edge_ioapic,
+ .end = end_edge_ioapic,
+ .set_affinity = set_ioapic_affinity,
+};
+
+static struct hw_interrupt_type ioapic_level_type = {
+ .typename = "IO-APIC-level",
+ .startup = startup_level_ioapic,
+ .shutdown = shutdown_level_ioapic,
+ .enable = enable_level_ioapic,
+ .disable = disable_level_ioapic,
+ .ack = mask_and_ack_level_ioapic,
+ .end = end_level_ioapic,
+ .set_affinity = set_ioapic_affinity,
+};
+
+static void enable_lapic_irq (unsigned int irq)
+{
+ unsigned long v;
+
+ v = apic_read(APIC_LVT0);
+ apic_write_around(APIC_LVT0, v & ~APIC_LVT_MASKED);
+}
+
+static void disable_lapic_irq (unsigned int irq)
+{
+ unsigned long v;
+
+ v = apic_read(APIC_LVT0);
+ apic_write_around(APIC_LVT0, v | APIC_LVT_MASKED);
+}
+
+static void ack_lapic_irq (unsigned int irq)
+{
+ ack_APIC_irq();
+}
+
+static void end_lapic_irq (unsigned int i) { /* nothing */ }
+
+static struct hw_interrupt_type lapic_irq_type = {
+ .typename = "local-APIC-edge",
+ .startup = NULL, /* startup_irq() not used for IRQ0 */
+ .shutdown = NULL, /* shutdown_irq() not used for IRQ0 */
+ .enable = enable_lapic_irq,
+ .disable = disable_lapic_irq,
+ .ack = ack_lapic_irq,
+ .end = end_lapic_irq
+};
+
+static void setup_nmi (void)
+{
+ /*
+ * Dirty trick to enable the NMI watchdog ...
+ * We put the 8259A master into AEOI mode and
+ * unmask on all local APICs LVT0 as NMI.
+ *
+ * The idea to use the 8259A in AEOI mode ('8259A Virtual Wire')
+ * is from Maciej W. Rozycki - so we do not have to EOI from
+ * the NMI handler or the timer interrupt.
+ */
+ apic_printk(APIC_VERBOSE, KERN_INFO "activating NMI Watchdog ...");
+
+ on_each_cpu(enable_NMI_through_LVT0, NULL, 1, 1);
+
+ apic_printk(APIC_VERBOSE, " done.\n");
+}
+
+/*
+ * This looks a bit hackish but it's about the only one way of sending
+ * a few INTA cycles to 8259As and any associated glue logic. ICR does
+ * not support the ExtINT mode, unfortunately. We need to send these
+ * cycles as some i82489DX-based boards have glue logic that keeps the
+ * 8259A interrupt line asserted until INTA. --macro
+ */
+static inline void unlock_ExtINT_logic(void)
+{
+ int pin, i;
+ struct IO_APIC_route_entry entry0, entry1;
+ unsigned char save_control, save_freq_select;
+ unsigned long flags;
+
+ pin = find_isa_irq_pin(8, mp_INT);
+ if (pin == -1)
+ return;
+
+ spin_lock_irqsave(&ioapic_lock, flags);
+ *(((int *)&entry0) + 1) = io_apic_read(0, 0x11 + 2 * pin);
+ *(((int *)&entry0) + 0) = io_apic_read(0, 0x10 + 2 * pin);
+ spin_unlock_irqrestore(&ioapic_lock, flags);
+ clear_IO_APIC_pin(0, pin);
+
+ memset(&entry1, 0, sizeof(entry1));
+
+ entry1.dest_mode = 0; /* physical delivery */
+ entry1.mask = 0; /* unmask IRQ now */
+ entry1.dest.physical.physical_dest = hard_smp_processor_id();
+ entry1.delivery_mode = dest_ExtINT;
+ entry1.polarity = entry0.polarity;
+ entry1.trigger = 0;
+ entry1.vector = 0;
+
+ spin_lock_irqsave(&ioapic_lock, flags);
+ io_apic_write(0, 0x11 + 2 * pin, *(((int *)&entry1) + 1));
+ io_apic_write(0, 0x10 + 2 * pin, *(((int *)&entry1) + 0));
+ spin_unlock_irqrestore(&ioapic_lock, flags);
+
+ save_control = CMOS_READ(RTC_CONTROL);
+ save_freq_select = CMOS_READ(RTC_FREQ_SELECT);
+ CMOS_WRITE((save_freq_select & ~RTC_RATE_SELECT) | 0x6,
+ RTC_FREQ_SELECT);
+ CMOS_WRITE(save_control | RTC_PIE, RTC_CONTROL);
+
+ i = 100;
+ while (i-- > 0) {
+ mdelay(10);
+ if ((CMOS_READ(RTC_INTR_FLAGS) & RTC_PF) == RTC_PF)
+ i -= 10;
+ }
+
+ CMOS_WRITE(save_control, RTC_CONTROL);
+ CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT);
+ clear_IO_APIC_pin(0, pin);
+
+ spin_lock_irqsave(&ioapic_lock, flags);
+ io_apic_write(0, 0x11 + 2 * pin, *(((int *)&entry0) + 1));
+ io_apic_write(0, 0x10 + 2 * pin, *(((int *)&entry0) + 0));
+ spin_unlock_irqrestore(&ioapic_lock, flags);
+}
+
+/*
+ * This code may look a bit paranoid, but it's supposed to cooperate with
+ * a wide range of boards and BIOS bugs. Fortunately only the timer IRQ
+ * is so screwy. Thanks to Brian Perkins for testing/hacking this beast
+ * fanatically on his truly buggy board.
+ */
+static inline void check_timer(void)
+{
+ int pin1, pin2;
+ int vector;
+
+ /*
+ * get/set the timer IRQ vector:
+ */
+ disable_8259A_irq(0);
+ vector = assign_irq_vector(0);
+ set_intr_gate(vector, interrupt[0]);
+
+ /*
+ * Subtle, code in do_timer_interrupt() expects an AEOI
+ * mode for the 8259A whenever interrupts are routed
+ * through I/O APICs. Also IRQ0 has to be enabled in
+ * the 8259A which implies the virtual wire has to be
+ * disabled in the local APIC.
+ */
+ apic_write_around(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT);
+ init_8259A(1);
+ timer_ack = 1;
+ enable_8259A_irq(0);
+
+ pin1 = find_isa_irq_pin(0, mp_INT);
+ pin2 = find_isa_irq_pin(0, mp_ExtINT);
+
+ printk(KERN_INFO "..TIMER: vector=0x%02X pin1=%d pin2=%d\n", vector,
pin1, pin2);
+
+ if (pin1 != -1) {
+ /*
+ * Ok, does IRQ0 through the IOAPIC work?
+ */
+ unmask_IO_APIC_irq(0);
+ if (timer_irq_works()) {
+ if (nmi_watchdog == NMI_IO_APIC) {
+ disable_8259A_irq(0);
+ setup_nmi();
+ enable_8259A_irq(0);
+ }
+ return;
+ }
+ clear_IO_APIC_pin(0, pin1);
+ printk(KERN_ERR "..MP-BIOS bug: 8254 timer not connected to
IO-APIC\n");
+ }
+
+ printk(KERN_INFO "...trying to set up timer (IRQ0) through the 8259A ...
");
+ if (pin2 != -1) {
+ printk("\n..... (found pin %d) ...", pin2);
+ /*
+ * legacy devices should be connected to IO APIC #0
+ */
+ setup_ExtINT_IRQ0_pin(pin2, vector);
+ if (timer_irq_works()) {
+ printk("works.\n");
+ if (pin1 != -1)
+ replace_pin_at_irq(0, 0, pin1, 0, pin2);
+ else
+ add_pin_to_irq(0, 0, pin2);
+ if (nmi_watchdog == NMI_IO_APIC) {
+ setup_nmi();
+ }
+ return;
+ }
+ /*
+ * Cleanup, just in case ...
+ */
+ clear_IO_APIC_pin(0, pin2);
+ }
+ printk(" failed.\n");
+
+ if (nmi_watchdog == NMI_IO_APIC) {
+ printk(KERN_WARNING "timer doesn't work through the IO-APIC -
disabling NMI Watchdog!\n");
+ nmi_watchdog = 0;
+ }
+
+ printk(KERN_INFO "...trying to set up timer as Virtual Wire
IRQ...");
+
+ disable_8259A_irq(0);
+ irq_desc[0].handler = &lapic_irq_type;
+ apic_write_around(APIC_LVT0, APIC_DM_FIXED | vector); /* Fixed mode */
+ enable_8259A_irq(0);
+
+ if (timer_irq_works()) {
+ printk(" works.\n");
+ return;
+ }
+ apic_write_around(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_FIXED | vector);
+ printk(" failed.\n");
+
+ printk(KERN_INFO "...trying to set up timer as ExtINT IRQ...");
+
+ timer_ack = 0;
+ init_8259A(0);
+ make_8259A_irq(0);
+ apic_write_around(APIC_LVT0, APIC_DM_EXTINT);
+
+ unlock_ExtINT_logic();
+
+ if (timer_irq_works()) {
+ printk(" works.\n");
+ return;
+ }
+ printk(" failed :(.\n");
+ panic("IO-APIC + timer doesn't work! Boot with apic=debug and send a
"
+ "report. Then try booting with the 'noapic' option");
+}
+
+int __init io_apic_get_unique_id (int ioapic, int apic_id)
+{
+ union IO_APIC_reg_00 reg_00;
+ static physid_mask_t apic_id_map = PHYSID_MASK_NONE;
+ physid_mask_t tmp;
+ unsigned long flags;
+ int i = 0;
+
+ /*
+ * The P4 platform supports up to 256 APIC IDs on two separate APIC
+ * buses (one for LAPICs, one for IOAPICs), where predecessors only
+ * supports up to 16 on one shared APIC bus.
+ *
+ * TBD: Expand LAPIC/IOAPIC support on P4-class systems to take full
+ * advantage of new APIC bus architecture.
+ */
+
+ if (physids_empty(apic_id_map))
+ apic_id_map = ioapic_phys_id_map(phys_cpu_present_map);
+
+ spin_lock_irqsave(&ioapic_lock, flags);
+ reg_00.raw = io_apic_read(ioapic, 0);
+ spin_unlock_irqrestore(&ioapic_lock, flags);
+
+ if (apic_id >= get_physical_broadcast()) {
+ printk(KERN_WARNING "IOAPIC[%d]: Invalid apic_id %d, trying "
+ "%d\n", ioapic, apic_id, reg_00.bits.ID);
+ apic_id = reg_00.bits.ID;
+ }
+
+ /*
+ * Every APIC in a system must have a unique ID or we get lots of nice
+ * 'stuck on smp_invalidate_needed IPI wait' messages.
+ */
+ if (check_apicid_used(apic_id_map, apic_id)) {
+
+ for (i = 0; i < get_physical_broadcast(); i++) {
+ if (!check_apicid_used(apic_id_map, i))
+ break;
+ }
+
+ if (i == get_physical_broadcast())
+ panic("Max apic_id exceeded!\n");
+
+ printk(KERN_WARNING "IOAPIC[%d]: apic_id %d already used, "
+ "trying %d\n", ioapic, apic_id, i);
+
+ apic_id = i;
+ }
+
+ tmp = apicid_to_cpu_present(apic_id);
+ physids_or(apic_id_map, apic_id_map, tmp);
+
+ if (reg_00.bits.ID != apic_id) {
+ reg_00.bits.ID = apic_id;
+
+ spin_lock_irqsave(&ioapic_lock, flags);
+ io_apic_write(ioapic, 0, reg_00.raw);
+ reg_00.raw = io_apic_read(ioapic, 0);
+ spin_unlock_irqrestore(&ioapic_lock, flags);
+
+ /* Sanity check */
+ if (reg_00.bits.ID != apic_id)
+ panic("IOAPIC[%d]: Unable change apic_id!\n", ioapic);
+ }
+
+ apic_printk(APIC_VERBOSE, KERN_INFO
+ "IOAPIC[%d]: Assigned apic_id %d\n", ioapic, apic_id);
+
+ return apic_id;
+}
+
diff -purN -X /home/mbligh/.diff.exclude virgin/arch/i386/mach-xen/apic.c
io_apic_split/arch/i386/mach-xen/apic.c
--- virgin/arch/i386/mach-xen/apic.c 1969-12-31 16:00:00.000000000 -0800
+++ io_apic_split/arch/i386/mach-xen/apic.c 2005-08-08 16:03:56.490109752 -0700
@@ -0,0 +1,28 @@
+#include <linux/config.h>
+#include <linux/init.h>
+
+#include <linux/mm.h>
+#include <linux/irq.h>
+#include <linux/delay.h>
+#include <linux/bootmem.h>
+#include <linux/smp_lock.h>
+#include <linux/interrupt.h>
+#include <linux/mc146818rtc.h>
+#include <linux/kernel_stat.h>
+#include <linux/sysdev.h>
+
+#include <asm/atomic.h>
+#include <asm/smp.h>
+#include <asm/mtrr.h>
+#include <asm/mpspec.h>
+#include <asm/desc.h>
+#include <asm/arch_hooks.h>
+#include <asm/hpet.h>
+
+#include <mach_apic.h>
+
+#include "io_ports.h"
+
+void disconnect_bsp_APIC(void) {}
+
+void __init sync_Arb_IDs(void) {}
diff -purN -X /home/mbligh/.diff.exclude virgin/arch/i386/mach-xen/io_apic.c
io_apic_split/arch/i386/mach-xen/io_apic.c
--- virgin/arch/i386/mach-xen/io_apic.c 1969-12-31 16:00:00.000000000 -0800
+++ io_apic_split/arch/i386/mach-xen/io_apic.c 2005-08-08 16:17:11.857195576
-0700
@@ -0,0 +1,62 @@
+/*
+ * Intel IO-APIC support for multi-Pentium hosts.
+ *
+ * Copyright (C) 1997, 1998, 1999, 2000 Ingo Molnar, Hajnalka Szabo
+ *
+ * Many thanks to Stig Venaas for trying out countless experimental
+ * patches and reporting/debugging problems patiently!
+ *
+ * (c) 1999, Multiple IO-APIC support, developed by
+ * Ken-ichi Yaku <yaku@css1.kbnes.nec.co.jp> and
+ * Hidemi Kishimoto <kisimoto@css1.kbnes.nec.co.jp>,
+ * further tested and cleaned up by Zach Brown <zab@redhat.com>
+ * and Ingo Molnar <mingo@redhat.com>
+ *
+ * Fixes
+ * Maciej W. Rozycki : Bits for genuine 82489DX APICs;
+ * thanks to Eric Gilmore
+ * and Rolf G. Tews
+ * for testing these extensively
+ * Paul Diefenbaugh : Added full ACPI support
+ */
+
+#include <linux/mm.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/sched.h>
+#include <linux/config.h>
+#include <linux/smp_lock.h>
+#include <linux/mc146818rtc.h>
+#include <linux/compiler.h>
+#include <linux/acpi.h>
+
+#include <linux/sysdev.h>
+#include <asm/io.h>
+#include <asm/smp.h>
+#include <asm/desc.h>
+#include <asm/timer.h>
+
+#include <mach_apic.h>
+
+#include "io_ports.h"
+
+#define clear_IO_APIC() ((void)0)
+
+static inline void ioapic_register_intr(int irq, int vector, unsigned long
trigger)
+{
+}
+
+void __init print_IO_APIC(void) { }
+
+static void __init setup_ioapic_ids_from_mpc(void) { }
+
+#define check_timer() ((void)0)
+
+int __init io_apic_get_unique_id (int ioapic, int apic_id)
+{
+ return apic_id;
+}
+
+
diff -purN -X /home/mbligh/.diff.exclude virgin/include/asm-i386/hw_irq.h
io_apic_split/include/asm-i386/hw_irq.h
--- virgin/include/asm-i386/hw_irq.h 2005-06-17 12:48:29.000000000 -0700
+++ io_apic_split/include/asm-i386/hw_irq.h 2005-08-08 15:57:25.821500408 -0700
@@ -66,7 +66,7 @@ extern atomic_t irq_mis_count;
#define IO_APIC_IRQ(x) (((x) >= 16) || ((1<<(x)) & io_apic_irqs))
-#if defined(CONFIG_X86_IO_APIC)
+#if defined(CONFIG_X86_IO_APIC) && !defined(CONFIG_XEN)
static inline void hw_resend_irq(struct hw_interrupt_type *h, unsigned int i)
{
if (IO_APIC_IRQ(i))
---------- End Forwarded Message ----------