Hi All This may be a silly question but... I have this dahdi_genconf generated file: ; Autogenerated by /usr/sbin/dahdi_genconf on Fri Jul 4 22:05:29 2014 ; If you edit this file and execute /usr/sbin/dahdi_genconf again, ; your manual changes will be LOST. ; Dahdi Channels Configurations (chan_dahdi.conf) ; ; This is not intended to be a complete chan_dahdi.conf. Rather, it is intended ; to be #include-d by /etc/chan_dahdi.conf that will include the global settings ; ; Span 1: WCT1/0 "Digium Wildcard TE110P T1/E1 Card 0" group=0,11 context=from-pstn switchtype = euroisdn signalling = pri_cpe channel => 1-15,17-31 context = default group = 63 ; Span 2: WCTDM/0 "Wildcard TDM410P" (MASTER) ;;; line="32 WCTDM/0/0 FXSKS" signalling=fxs_ks callerid=asreceived group=0 context=from-pstn channel => 32 calleridgroupcontext=default ;;; line="33 WCTDM/0/1 FXSKS" signalling=fxs_ks callerid=asreceived group=0 context=from-pstn channel => 33 calleridgroupcontext=default ;;; line="34 WCTDM/0/2 FXSKS" signalling=fxs_ks callerid=asreceived group=0 context=from-pstn channel => 34 calleridgroupcontext=default ;;; line="35 WCTDM/0/3 FXSKS" signalling=fxs_ks callerid=asreceived group=0 context=from-pstn channel => 35 calleridgroupcontext=default I can see, for instance, 5 "signalling=" lines. How can I tell which signalling refer to which channel? How chan_dadhi.conf groups the config options for each channel? What indicates the end of the configuration of one dahdi channel and starts another channel? It is very confusing to me. Reagards Ethy
Once set, settings apply to all following channel => lines until the setting is changed. -----Original Message----- From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Ethy H. Brito Sent: Tuesday, July 08, 2014 1:30 PM To: asterisk-users at lists.digium.com Subject: [asterisk-users] chan_dahdi.conf sintax Hi All This may be a silly question but... I have this dahdi_genconf generated file: ; Autogenerated by /usr/sbin/dahdi_genconf on Fri Jul 4 22:05:29 2014 ; If you edit this file and execute /usr/sbin/dahdi_genconf again, ; your manual changes will be LOST. ; Dahdi Channels Configurations (chan_dahdi.conf) ; ; This is not intended to be a complete chan_dahdi.conf. Rather, it is intended ; to be #include-d by /etc/chan_dahdi.conf that will include the global settings ; ; Span 1: WCT1/0 "Digium Wildcard TE110P T1/E1 Card 0" group=0,11 context=from-pstn switchtype = euroisdn signalling = pri_cpe channel => 1-15,17-31 context = default ; only applies to channel lines AFTER this point group = 63 ; only applies to channel lines AFTER this point ; Span 2: WCTDM/0 "Wildcard TDM410P" (MASTER) ;;; line="32 WCTDM/0/0 FXSKS" signalling=fxs_ks callerid=asreceived group=0 context=from-pstn channel => 32 callerid= ; only applies to channel lines AFTER this point group= ; only applies to channel lines AFTER this point context=default ; only applies to channel lines AFTER this point