Displaying 20 results from an estimated 456 matches for "asreceived".
2008 Mar 27
3
problem about voice when using TDM2400p with VPMADT032 echo canceller module
...urations (zapata.conf)
;
; This is not intended to be a complete zapata.conf. Rather, it is intended
; to be #include-d by /etc/zapata.conf that will include the global settings
;
; Span 1: WCTDM/0 "Wildcard TDM2400P Board 1"
;;; line="1 WCTDM/0/0"
signalling=fxs_ks
callerid=asreceived
group=0
context=from-zaptel
channel => 1
context=default
;;; line="2 WCTDM/0/1"
signalling=fxs_ks
callerid=asreceived
group=0
context=from-zaptel
channel => 2
context=default
;;; line="3 WCTDM/0/2"
signalling=fxs_ks
callerid=asreceived
group=0
context=from-zaptel
chann...
2010 Aug 23
1
Dahdi install gone wrong
...te chan_dahdi.conf. Rather,
it is
* intended
* ; to be #include-d by /etc/chan_dahdi.conf that will include the
global
* settings
* ;
*
* ; Span 1: WCTDM/0 "Wildcard TDM800P Board 1" (MASTER)
* ;;; line="1 WCTDM/0/0 FXSKS (SWEC: MG2)"
* signalling=fxs_ks
* callerid=asreceived
* group=0
* context=from-pstn
* channel => 1
* callerid=
* group=
* context=default
*
* ;;; line="2 WCTDM/0/1 FXSKS (SWEC: MG2)"
* signalling=fxs_ks
* callerid=asreceived
* group=0
* context=from-pstn
* channel => 2
* callerid=
* group=
* context=default
*
* ;;;...
2007 Sep 15
2
Astribank and caller ID from PSTN
...nes connected to the
astribank. When I receive calls on my ipphone I get always Unknown
callerid.
It's is possible to receive the callerid from the lines on the astribank
unit? This is my config:
[channels]
language=es
context=from-zaptel
signalling=fxs_ks
;rxwink=300
usecallerid=yes
callerid=asreceived
;cidsignalling=bell
;cidstart=ring
hidecallerid=no
callwaiting=yes
;usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
;callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
echotraining=yes
echotraining=800
relaxdtmf=yes
rxgain=3.0
txgain=3...
2004 May 07
6
X100P keeping PSTN line Offhook
...no
Pulse phone: no
Echo Cancellation: 128 taps, currently OFF
Actual Confinfo: Num/0, Mode/0x0000
Actual Confmute: No
Actual Hookstate: Offhook
========= zapata.conf ======================
busydetect=no
musiconhold=default
group=1
pickupgroup=1
immediate=no
context=bell
signalling=fxs_ks
callerid=asreceived
channel => 1
pickupgroup=1
immediate=no
signalling=fxs_ks
callerid=asreceived
channel => 2
2005 Aug 27
1
Asterisk ISDN: Problem Setting CallerID as DID Extension Numbers.
...dial numbers as Caller ID when dialing out.
Configration:
capi.conf
---------
[general]
nationalprefix=0
internationalprefix=00
rxgain=0.8
txgain=0.8
[interfaces]
mode=immediate
isdnmode=ptp
msn=BAAAAAA
incomingmsn=*
controller=1
softdtmf=1
accountcode=
context=main-menu
usecallerid=yes
callerid=asreceived
;echosquelch=1
;echocancel=yes
;echotail=64
callgroup=1
pickupgroup=1
devices=2
mode=immediate
isdnmode=ptp
msn=BAAAAAA
incomingmsn=*
controller=2
softdtmf=1
accountcode=
context=main-menu
usecallerid=yes
callerid=asreceived
callgroup=1
pickupgroup=1
devices=2
mode=immediate
isdnmode=ptp
msn=BAAA...
2007 Jan 09
1
Caller Id problem
...s, the CID is transmitted during a Call Waiting, but not during a
normal call. It looks like Asterisk does not send the CID (or send it too soon /
too late) during the first ("normal") call.
Any idea is welcome.
Thanks!
AF.
--
*zapata.conf*
usecallerid=yes
usecallingpres=yes
callerid=asreceived
hidecallerid=no
callwaiting=yes
callwaitingcallerid=yes
treewaycalling=yes
transfer=yes
useincomingcalleridonzaptransfer=yes
...
context=home
signalling=fxo_ks
channel => 1
context=office
signalling=fxo_ks
channel => 2
context=freebox
signalling=fxs_ks
callerid=asreceived
channel => 3...
2005 Aug 19
4
Overriding Caller ID
...nf
;
; Local calls
;
exten => _NXXNXXXXXX,1,CallingPres(32)
exten => _NXXNXXXXXX,2,SetCallerID(2125551234)
exten => _NXXNXXXXXX,3,Dial(${TRUNK_LO}/${EXTEN})
zapata.conf
[channels]
usecallerid=yes
cidsignalling=bell
cidstart=ring
hidecallerid=no
restrictcid=no
usecallingpres=yes
callerid=asreceived
switchtype = dms100
signalling = em_w
group = 1
context=inbound
callerid=asreceived
channel => 1-24
Does anyone have any suggestions?
Thanks,
Waldo
2005 May 05
3
can't create Zap channel
Before you jump ahead, yes I do have chan_zap.so loaded..
Call Flow: Asterisk 1 --IAX2--> Asterisk 2 ---> PRI
-- Accepting AUTHENTICATED call from 22.22.22.22:
> requested format = ulaw,
> requested prefs = (),
> actual format = ulaw,
> host prefs = (ulaw|alaw|gsm),
> priority = mine
-- Executing
2007 Jun 25
1
Xorcom Bri 4 Port USB
...loadzone = au
defaultzone = au
/etc/asterisk/zapata.conf
[channels]
; echocancel = yes
; transfer = yes
; threewaycalling = yes
#include zapata-channels.conf
/etc/asterisk/zapata-channels.conf
; Span 1: XBUS-00/XPD-00 "Xorcom XPD #0/0: BRI_TE"
callerid=asreceived
group=0
context=from-pstn
switchtype = euroisdn
signalling = bri_cpe
channel => 1-2
callerid=
group=
context=default
; Span 2: XBUS-00/XPD-08 "Xorcom XPD #0/8: BRI_TE"
callerid=asreceived
group=0
context=from-pstn
switchtype = euroisdn
signalling = bri_cpe
channel => 4-5
callerid=...
2014 Jul 08
1
chan_dahdi.conf sintax
..."Digium Wildcard TE110P T1/E1 Card 0"
group=0,11
context=from-pstn
switchtype = euroisdn
signalling = pri_cpe
channel => 1-15,17-31
context = default
group = 63
; Span 2: WCTDM/0 "Wildcard TDM410P" (MASTER)
;;; line="32 WCTDM/0/0 FXSKS"
signalling=fxs_ks
callerid=asreceived
group=0
context=from-pstn
channel => 32
callerid=
group=
context=default
;;; line="33 WCTDM/0/1 FXSKS"
signalling=fxs_ks
callerid=asreceived
group=0
context=from-pstn
channel => 33
callerid=
group=
context=default
;;; line="34 WCTDM/0/2 FXSKS"
signalling=fxs_ks
callerid=...
2010 Jan 19
0
Detecting incoming faxes and forwarding to phone fax machine
...onf. Rather, it is
intended
; to be #include-d by /etc/chan_dahdi.conf that will include the global
settings
;
; Span 1: WCTDM/0 "Wildcard TDM410P Board 1" (MASTER)
; Span 2: WCTDM/1 "Wildcard TDM800P Board 2"
;;; line="5 WCTDM/1/0 FXSKS"
signalling=fxs_ks
callerid=asreceived
faxdetect=incoming
group=0
context=from-zaptel
channel => 5
callerid=
group=
context=default
;AMPLABEL:Channel 5 - Button 1
;AMPWILDCARDLABEL(6):Trunks
;;; line="6 WCTDM/1/1 FXSKS"
signalling=fxs_ks
callerid=asreceived
faxdetect=incoming
group=0
context=from-zaptel
channel => 6
cal...
2005 Sep 28
1
Tiny Echo on PSTN via Zaptel
...om:
echocancel=yes
echocancelwhenbridged=no
echotraining=yes
context=companyA-pstn
txgain=0.0
rxgain=0.0
signalling=fxs_ks
group=1
channel=1-7
context=companyB-pstn
txgain=0.0
rxgain=0.0
signalling=fxs_ks
group=2
channel=11-12
context=internal
txgain=-12.0
rxgain=-8.0
signalling=fxo_ls
callerid=asreceived
group=3
channel=13-48
When the calls are connected, I can use "zap show channel 11" and verify
that the echo cancellation is ON. But I can still hear one.
I've also tried echocancelwhenbridged=yes, but it didn't make any difference.
--
Shaw Terwilliger <sterwill@sourcegear....
2005 Feb 11
2
Question about DID
...1,0,esf,b8zs
bchan=1-23
dchan=24
# PRI to Fax server
span=2,0,0,esf,b8zs
bchan=25-47
dchan=48
zapata.conf
[channels]
context=from-analog
signalling=pri_cpe
switchtype=dms100
group=1
usecallerid=yes
hidecallerid=no
restrictcid=no
usecallingpres=no
useincomingcalleridonzaptransfer=yes
callerid=asreceived
faxdetect=no
musiconhold=default
channel => 1-23
context=from-sip-internal
switchtype=dms100
signalling=pri_net
group=2
overlapdial=yes
usecallerid=yes
hidecallerid=no
restrictcid=no
usecallingpres=no
useincomingcalleridonzaptransfer=yes
callerid=asreceived
faxdetect=no
musiconhold=default
c...
2010 May 28
3
DAHDI Help (made a cardinal sin :()
...echocan_mg2: Registered echo canceler 'MG2'
dahdi: Registered tone zone 4 (United Kingdom)
/etc/asterisk/chan_dahdi.conf
-----------------------------
[channels]
language=en
usecallerid=yes
cidsignalling=v23
sendcalleridafter = 2
rxgain=2.0
txgain=3.0
progzone=uk
signalling=fxo_ks
callerid=asreceived
group=0
context=inbound-dahdi
channel => 1
callerid=
group=
context=inbound-dahdi
/etc/asterisk/dahdi-channels.conf
---------------------------------
; Autogenerated by /usr/sbin/dahdi_genconf on Thu May 27 13:25:14 2010
; If you edit this file and execute /usr/sbin/dahdi_genconf again,
; your...
2006 Feb 27
0
TE411P problem-- probably stupid.
...,0,esf,b8zs
bchan=25-47
dchan=48
span=3,0,0,esf,b8zs
bchan=49-71
dchan=72
span=4,0,0,esf,b8zs
bchan=73-95
dchan=96
loadzone=us
defaultzone=us
========================
zapata.conf
;
; Zapata telephony interface
;
; Configuration file
[channels]
busydetect=1
busycount=7
relaxdtmf=yes
callerid=asreceived
context=default
signalling=pri_cpe
usecallerid=yes
transfer=yes
echocancel=yes
echocancelwhenbridged=yes
switchtype=dms100
rxgain=0.0
txgain=0.0
immediate=no
signalling=pri_cpe
group=1
context=default
channel => 1-23
busydetect=1
busycount=7
relaxdtmf=yes
callerid=asreceived
context...
2007 Aug 19
1
Someone please explain FXO/FXS module/channel relationships in Zaptel configuration to me
...talled -- AUTO FXS/DPO
Module 1: Installed -- AUTO FXO (FCC mode)
Module 2: Not installed
Module 3: Not installed
Found a Wildcard TDM: Wildcard TDM400P REV I (2 modules)
% cat /etc/zaptel.conf
fxoks=1
fxsks=2
% cat zapata.conf
...
signalling=fxo_ks
context=outgoing-analog
echocancel=yes
callerid=asreceived
channel => 1
signalling=fxs_ks
context=incoming-analog
echocancel=yes
callerid=asreceived
channel => 2
2010 Aug 29
1
asterisk-users Digest, Vol 73, Issue 63
...context as I want, but the other
> channel is stuck going to the default "from-pstn" context no matter what
> I do.
>
> Can anyone see what I've missed?
>
>>From dahdi-channels.conf:
> ;;; line="3 WCTDM/4/2 FXSKS"
> signalling=fxs_ks
> callerid=asreceived
> group=0
> context=from-pstn-3
> channel => 3
> callerid=
> group=
> context=default
>
> ;;; line="4 WCTDM/4/3 FXSKS"
> signalling=fxs_ks
> callerid=asreceived
> group=0
> context=from-pstn-4
> channel => 4
> callerid=
> group=
> cont...
2003 Nov 12
1
X100P random hangups.
...uld be looking at?
My zap config looks like.
context = inbound-work
include => extensions
signalling = fxs_ks
group = 1
callgroup = 1
pickupgroup = 1
usecallerid = yes
callerid = asreceived
hidecallerid = no
callwaiting = yes
callwaitingcallerid = yes
threewaycalling = yes
transfer = yes
echocancel = yes
echocancelwhenbridged = yes
rxgain = 0.6
txgain = 0.6
immediate = no
b...
2005 Jun 19
0
Zaptel and Zapata Conf's
...; This T1 is attached to in-house CUST 3 System
;
language=en
rxwink=300
usecallerid=yes
hidecallerid=no
callwaiting=no
usecallingpres=yes
echocancel=yes
echocancelwhenbridged=no
echotraining=800
rxgain=0.0
txgain=0.0
immediate=no
busydetect=no
busycount=15
callprogress=no
;relaxdtmf=yes
;callerid=asreceived
faxdetect=incoming
signalling =>em_w
group = 2
channel => 1-24
; Span 2: TE4/0/2 "TE410P (PCI) Card 0 Span 2"
; This T1 is attached to inhouse CUST 10 System
;
language=en
rxwink=300
usecallerid=yes
hidecallerid=no
callwaiting=no
usecallingpres=yes
echocancel=yes
echocancelwhenbri...
2004 May 28
1
Zap callgroup/pickupgroup question
...s
hidecallerid=no
threewaycalling=no
transfer=no
cancallforward=no
callreturn=no
echocancel=32
echocancelwhenbridged=no
echotraining=yes
relaxdtmf=no
group=1
callgroup=1
pickupgroup=1,3
immediate=no
callerid="Benshaw VOIP" <(256) 848-5432>
channel => 1-16
context=fxo
callerid=asreceived
signalling=fxs_ks
transfer=no
group=2
callgroup=2
pickupgroup=2
echocancel=128
echocancelwhenbridged=yes
echotraining=yes
callprogress=no
channel => 17-23
context=in_1234567
callerid=asreceived
group=3
callgroup=3
pickupgroup=3
callprogress=no
channel => 24
---------------8<-------------...