Got some solutions myself. LAG is caused by : NETDEV WATCHDOG eth0 timeout this is caused bacause of problems with rtl8139 network card in kernel 2.6.x Solutions : 1.add in lilo.conf : append="noapic" 2.turn apic off in bios 3.if u have 2 rtl8139 cards, then exchange one with some other card type (chipset) btw. all above was found in various polish forums, but none has worked for me. im switching kernel back to 2.4.22, and will report later . _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Switching back to older kernel won''t do much. I''ve had this problem much earlier when using two NICs of the same type. I couldn''t figure out why, but there ARE problems is many ways when using two cards of the same type. I had problems with sharing, with routing, etc. etc. Best solution is to use different NICs... don''t ask me why... I just found out that this will solve the problems... -----Ursprüngliche Nachricht----- Von: lartc-admin@mailman.ds9a.nl [mailto:lartc-admin@mailman.ds9a.nl] Im Auftrag von Hariett Jones Gesendet: Mittwoch, 13. Oktober 2004 22:13 An: lartc@mailman.ds9a.nl Betreff: [Fwd: Re: [LARTC] ssh and cs LAG] Got some solutions myself. LAG is caused by : NETDEV WATCHDOG eth0 timeout this is caused bacause of problems with rtl8139 network card in kernel 2.6.x Solutions : 1.add in lilo.conf : append="noapic" 2.turn apic off in bios 3.if u have 2 rtl8139 cards, then exchange one with some other card type (chipset) btw. all above was found in various polish forums, but none has worked for me. im switching kernel back to 2.4.22, and will report later . _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/ _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
On Wednesday 13 October 2004 17:34, Stephan M. Ott wrote:> Switching back to older kernel won''t do much. > I''ve had this problem much earlier when using two NICs of the same type. > I couldn''t figure out why, but there ARE problems is many ways when > using two cards of the same type. I had problems with sharing, with > routing, etc. etc. > Best solution is to use different NICs... don''t ask me why... I just > found out that this will solve the problems... >It''s probably the machine. I have three rtl8139 based cards in a box and it''s been working flawlessly for six months. I''ve used 2.4 series kernels and 2.6 series kernels on the box in question. -- Jason Boxman Perl Programmer / *NIX Systems Administrator Shimberg Center for Affordable Housing | University of Florida http://edseek.com/ - Linux and FOSS stuff _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Hariett, Switching to the 2.4 kernel is not an option as this is a production server. The machine has a dual Intel PRO/1000 NIC. The machine usies grub, not lilo, but that doesn''t really matter. Not sure if APIC is an issue or not. Thanks for your help. Mike Hariett Jones wrote:> Got some solutions myself. > > LAG is caused by : > NETDEV WATCHDOG eth0 timeout > > this is caused bacause of problems with rtl8139 network card in kernel > 2.6.x > > Solutions : > 1.add in lilo.conf : append="noapic" > 2.turn apic off in bios > 3.if u have 2 rtl8139 cards, then exchange one with some other card > type (chipset) > > btw. all above was found in various polish forums, but none has worked > for me. im switching kernel back to 2.4.22, and will report later . > > > > _______________________________________________ > LARTC mailing list / LARTC@mailman.ds9a.nl > http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/ >_______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Hariett Jones wrote:> Got some solutions myself. > > LAG is caused by : > NETDEV WATCHDOG eth0 timeout > > this is caused bacause of problems with rtl8139 network card in kernel > 2.6.xI had to unselect SMP in kernel config to get my rtl8139 + PCI modem to work with 2.6.8.1 Andy.> Solutions : > 1.add in lilo.conf : append="noapic" > 2.turn apic off in bios > 3.if u have 2 rtl8139 cards, then exchange one with some other card type > (chipset) > > btw. all above was found in various polish forums, but none has worked > for me. im switching kernel back to 2.4.22, and will report later . > > > > _______________________________________________ > LARTC mailing list / LARTC@mailman.ds9a.nl > http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/ >_______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
We had no problems with smp on 2.6.8.3, and since this cpu supports hyperthreading we enjoy a *big* power boost using smp. :) Mike Andy Furniss wrote:> Hariett Jones wrote: > >> Got some solutions myself. >> >> LAG is caused by : >> NETDEV WATCHDOG eth0 timeout >> >> this is caused bacause of problems with rtl8139 network card in >> kernel 2.6.x > > > I had to unselect SMP in kernel config to get my rtl8139 + PCI modem > to work with 2.6.8.1 > > Andy. > >> Solutions : >> 1.add in lilo.conf : append="noapic" >> 2.turn apic off in bios >> 3.if u have 2 rtl8139 cards, then exchange one with some other card >> type (chipset) >> >> btw. all above was found in various polish forums, but none has >> worked for me. im switching kernel back to 2.4.22, and will report >> later . >> >> >> >> _______________________________________________ >> LARTC mailing list / LARTC@mailman.ds9a.nl >> http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/ >> > > > _______________________________________________ > LARTC mailing list / LARTC@mailman.ds9a.nl > http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/ >_______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Mike Slinn wrote:> We had no problems with smp on 2.6.8.3, and since this cpu supports > hyperthreading we enjoy a *big* power boost using smp. :)I think it''s this box(via p200) + rtl8139 that''s the problem - it''s always been a bit flakey. I have the same card in a PII350 intel440bx and it has always been OK. Andy. _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/