search for: hariett

Got some solutions myself. LAG is caused by : NETDEV WATCHDOG eth0 timeout this is caused bacause of problems with rtl8139 network card in kernel 2.6.x Solutions : 1.add in lilo.conf : append="noapic" 2.turn apic off in bios 3.if u have 2 rtl8139 cards, then exchange one with some other card type (chipset) btw. all above was found in various polish forums, but none has worked for

Hello, i have a server (486sx and 16ram). My pc is providing internet to 12 other computers. Ethernet cards are realteks 8139 (drivers builtin to the kernel 2.6.8). It gives me this error : NETDEVICE WATCHDOG eth1 : ...timeout. I checked in many places for solutions. Even wrote to this mailinglist. But lately i recived information, that too much upload may mix my adsl modem up. So..... my

tc class add dev $DEV parent 1: classid 1:1 htb rate ${UPLINK}kbit burst 6k tc qdisc add dev $DEV handle ffff: ingress tc filter add dev $DEV parent ffff: protocol ip prio 50 u32 match ip src \ 0.0.0.0/0 police rate ${DOWNLINK}kbit burst 10k drop flowid :1 why does the download is being sent to class 1 which is limited by uplink ? why the rate is being mentioned in filter and in class ?

Server : eth0 - internet DSL eth1 - LAN wlan0 - wireles LAN I want server to share bandwith from eth0 evenly for users on eth1 and wlan0. How can i make it ? Is it possible ? As far as i know htb splits outgoing bandwith on one device only. ---------------------------------------------------- Grypa? Damy radę! Sprawdź jak jej zapowbiegać, a jeśli już za późno ...jak leczyć - grypa.wp.pl

Hello, i have a server (486sx and 16ram). It gives me this error : NETDEVICE WATCHDOG eth1 : ...timeout. I checked in many places for solutions. Even wrote to this mailinglist. But lately i recived information, that too much upload may mix my adsl modem up. So..... my question is how should my script look while the situation is : eth0 - connected to adsl modem and thus to internet eth1 -

Bernard Łabno wrote: > Hello, > What does this line mean : > > HTB: quantum of class 10200 is small. Consider r2q change. > > > And how should I fix it ? I have dsl 1mb connection and 2 cards > (realtek-8139C and realtek-8100B/8139D) > > Could the above line cause this ? : > NETDEV WATCHDOG: eth0: transmit timed out > eth0: Transmit timeout, status 0c 0005

I have htb on 486 sx with 16mb ram. Slackware 9.1. Connection : dsl 1Mbit. 486 works as router and trafic shaper for network made of 12 pc''s. it does the job quite well, but when i play Counter-Strike or connect to my 486 via ssh (on lan), i get huge lag every 11-20 sec. when i connect to 486 via ssh and run iptraf program i see all the trafic, and after a while when lag comes the