thr3ads.net - Xen users - Xen VGA Passthrough Questions [Mar 2012]

If this information is useful, please help other people find it:
Share via:

Teo En Ming (Zhang Enming)

2012-Mar-20 07:39 UTC

Xen VGA Passthrough Questions

Dear David Techer,

I have read through your article on Xen VGA passthrough on 
http://www.davidgis.fr.

It appears that the following command on your blog doesn''t work.

dmesg | grep 01:00.0 | grep BAR

The above command shows nothing at all. Is there an alternative solution?

Thank you very much.

Yours sincerely,

Teo En Ming (Zhang Enming)

David TECHER

2012-Mar-20 09:54 UTC

head link

Re : Xen VGA Passthrough Questions

Hi Teo,

The 3 first lines with pattern ''pci.*mem'' need to be returned


U need to use somethign like 


root@gemini:~# lspci |grep VGA
02:00.0 VGA compatible controller: nVidia Corporation Device 0ca2 (rev a2)
root@gemini:~# dmesg|grep 02:00.0 |grep '' pci [0-9].*mem''|head
-n3
[    0.174458] pci 0000:02:00.0: reg 10: [mem 0xfb000000-0xfbffffff]
[    0.174466] pci 0000:02:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.174475] pci 0000:02:00.0: reg 1c: [mem 0xee000000-0xefffffff 64bit pref]


Kind regards





________________________________
 De : Teo En Ming (Zhang Enming) <singapore.mr.teo.en.ming@gmail.com>
À : "xen-users@lists.xen.org" <xen-users@lists.xen.org>; David
TECHER <davidtecher@yahoo.fr>; Teo En Ming (Zhang Enming)
<singapore.mr.teo.en.ming@gmail.com>
Envoyé le : Mardi 20 mars 2012 8h39
Objet : Xen VGA Passthrough Questions
 
Dear David Techer,

I have read through your article on Xen VGA passthrough on
http://www.davidgis.fr.

It appears that the following command on your blog doesn''t work.

dmesg | grep 01:00.0 | grep BAR

The above command shows nothing at all. Is there an alternative solution?

Thank you very much.

Yours sincerely,

Teo En Ming (Zhang Enming)

_______________________________________________
Xen-users mailing list
Xen-users@lists.xen.org
http://lists.xen.org/xen-users

Teo En Ming (Zhang Enming)

2012-Mar-20 15:02 UTC

head link

Re: Re : Xen VGA Passthrough Questions

David TECHER

2012-Mar-20 15:17 UTC

head link

Re : Re : Xen VGA Passthrough Questions

You''re welcome.

Keep in mind that if you are going to upgrade BIOS for your motherboard, those
values for your card may changed.

I was in this situation last time  BIOS was upgraded.

It does mean that those values will changed each time you upgrade your
motherboad BIOS but having thos values changed after a BIOS upgrade could occur
for a specific upgrade.

Don''t ask me why...I do not know.

So you will be well advised to heck those values for each BIOS upgrade.

Moreover don''t waste your time to test VGA PassThrough for NVIDIA for
Windows  7. For Windows 7 use ATI.


I did my tests for playing with wine 1.4/1.5 on domU Ubuntu Lucid 10.04.4 PV HVM
(game like Crysis 2) and it rocks :)


My configuration:

Manufacturer: MSI / Product Name: H61MU-E35 (MS-7680) 

Bios version: V10.11





________________________________
 De : Teo En Ming (Zhang Enming) <singapore.mr.teo.en.ming@gmail.com>
À : David TECHER <davidtecher@yahoo.fr> 
Cc : "xen-users@lists.xen.org" <xen-users@lists.xen.org>; Teo En
Ming (Zhang Enming) <singapore.mr.teo.en.ming@gmail.com>
Envoyé le : Mardi 20 mars 2012 16h02
Objet : Re: Re : Xen VGA Passthrough Questions
 

Dear David Techer,

Thank you.

I think the following command is sufficient.

dmesg | grep 01:00.0 | grep "pci.*mem"

Yours sincerely,

Teo En Ming (Zhang Enming)

On 20/03/2012 17:54, David TECHER wrote: 
Hi Teo,>
>
>The 3 first lines with pattern ''pci.*mem'' need to be
returned
>
>
>
>U need to use somethign like 
>
>
>
>root@gemini:~# lspci |grep VGA
>02:00.0 VGA compatible controller: nVidia Corporation Device
            0ca2 (rev a2)>root@gemini:~# dmesg|grep 02:00.0 |grep '' pci
            [0-9].*mem''|head -n3>[    0.174458] pci 0000:02:00.0: reg 10: [mem
            0xfb000000-0xfbffffff]>[    0.174466] pci 0000:02:00.0: reg 14: [mem
            0xd0000000-0xdfffffff 64bit pref]>[    0.174475] pci 0000:02:00.0: reg 1c: [mem
            0xee000000-0xefffffff 64bit pref]>
>
>
>Kind regards
>
>
>
>
>
>
>________________________________
> De : Teo En Ming (Zhang Enming) <singapore.mr.teo.en.ming@gmail.com>
>À : "xen-users@lists.xen.org" <xen-users@lists.xen.org>;
David TECHER <davidtecher@yahoo.fr>; Teo En Ming (Zhang Enming)
<singapore.mr.teo.en.ming@gmail.com>
>Envoyé le : Mardi 20 mars 2012 8h39
>Objet : Xen VGA Passthrough Questions
> 
>Dear David Techer,
>
>I have read through your article on Xen VGA passthrough on
http://www.davidgis.fr.
>
>It appears that the following command on your blog doesn''t
            work.>
>dmesg | grep 01:00.0 | grep BAR
>
>The above command shows nothing at all. Is there an
            alternative solution?>
>Thank you very much.
>
>Yours sincerely,
>
>Teo En Ming (Zhang Enming)
>
>
>
_______________________________________________
Xen-users mailing list
Xen-users@lists.xen.org
http://lists.xen.org/xen-users

Teo En Ming (Zhang Enming)

2012-Mar-20 15:39 UTC

head link

Re: Re : Re : Xen VGA Passthrough Questions

Casey DeLorme

2012-Mar-20 16:36 UTC

head link

Re: Re : Re : Xen VGA Passthrough Questions

Hello,

Supposedly both the board & CPU must have VT-d, the E6300 does not:
http://ark.intel.com/products/41493/Intel-Pentium-Processor-E6300-(2M-Cache-2_80-GHz-1066-MHz-FSB)

If pciback was compiled into your kernel (not a module) then you can add
"xen-pciback.hide=(01:00.0)" to the module line in your grub.cfg,
substituting your lspci device names.

nVidia supposedly requires patches and only works in Windows XP, there are
a few Windows 7 success stories, but they seem rare.  Most people have
success without patches using AMD cards.

Best of luck.

~Casey DeLorme


On Tue, Mar 20, 2012 at 11:39 AM, Teo En Ming (Zhang Enming) <
singapore.mr.teo.en.ming@gmail.com> wrote:
>  Dear David Techer and others,
>
> I thought Intel H61 chipset and MSI motherboards officially don''t
support
> VT-x and VT-d? There is no VT-d enabling option in MSI motherboard BIOS.
>
> I want to test Xen VGA passthrough for Windows 8 Consumer Preview 64-bit
> English HVM domU with my Intel DQ45CB motherboard and Intel Pentium Dual
> Core E6300 2800 MHz.
>
> By the way, I am using Linux kernel 3.3.0 Final. Should I use PCIBACK or
> PCI-STUB? If I use pciback, what arguments should I parse to the kernel
> command line in GRUB2? Please point me to the documentation for kernel
> command line arguments in the linux kernel source tree.
>
> My graphics card: Palit NVIDIA Geforce 8400 GS PCI Express x16 SGD$44
>
>
> Thank you very much.
>
> Yours sincerely,
>
> Teo En Ming (Zhang Enming)
>
>
> On 20/03/2012 23:17, David TECHER wrote:
>
>  You''re welcome.
>
>  Keep in mind that if you are going to upgrade BIOS for your motherboard,
> those values for your card may changed.
>
>  I was in this situation last time  BIOS was upgraded.
>
>  It does mean that those values will changed each time you upgrade your
> motherboad BIOS but having thos values changed after a BIOS upgrade could
> occur for a specific upgrade.
>
>  Don''t ask me why...I do not know.
>
>  So you will be well advised to heck those values for each BIOS upgrade.
>
>  Moreover don''t waste your time to test VGA PassThrough for NVIDIA
for
> Windows  7. For Windows 7 use ATI.
>
>  I did my tests for playing with wine 1.4/1.5 on domU Ubuntu Lucid
> 10.04.4 PV HVM (game like Crysis 2) and it rocks :)
>
>  My configuration:
>
>  Manufacturer: MSI / Product Name: H61MU-E35 (MS-7680)
>  Bios version: V10.11
>
>
>
>    ------------------------------
> *De :* Teo En Ming (Zhang Enming)
<singapore.mr.teo.en.ming@gmail.com><singapore.mr.teo.en.ming@gmail.com>
> *À :* David TECHER <davidtecher@yahoo.fr>
<davidtecher@yahoo.fr>
> *Cc :* "xen-users@lists.xen.org" <xen-users@lists.xen.org>
> <xen-users@lists.xen.org> <xen-users@lists.xen.org>; Teo En
Ming (Zhang
> Enming)
<singapore.mr.teo.en.ming@gmail.com><singapore.mr.teo.en.ming@gmail.com>
> *Envoyé le :* Mardi 20 mars 2012 16h02
> *Objet :* Re: Re : Xen VGA Passthrough Questions
>
>  Dear David Techer,
>
> Thank you.
>
> I think the following command is sufficient.
>
> dmesg | grep 01:00.0 | grep "pci.*mem"
>
> Yours sincerely,
>
> Teo En Ming (Zhang Enming)
>
> On 20/03/2012 17:54, David TECHER wrote:
>
>  Hi Teo,
>
>  The 3 first lines with pattern ''pci.*mem'' need to be
returned
>
>  U need to use somethign like
>
>  root@gemini:~# lspci |grep VGA
> 02:00.0 VGA compatible controller: nVidia Corporation Device 0ca2 (rev a2)
> root@gemini:~# dmesg|grep 02:00.0 |grep '' pci
[0-9].*mem''|head -n3
> [    0.174458] pci 0000:02:00.0: reg 10: [mem 0xfb000000-0xfbffffff]
> [    0.174466] pci 0000:02:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit
> pref]
> [    0.174475] pci 0000:02:00.0: reg 1c: [mem 0xee000000-0xefffffff 64bit
> pref]
>
>  Kind regards
>
>
>    ------------------------------
> *De :* Teo En Ming (Zhang Enming)
<singapore.mr.teo.en.ming@gmail.com><singapore.mr.teo.en.ming@gmail.com>
> *À :* "xen-users@lists.xen.org" <xen-users@lists.xen.org>
> <xen-users@lists.xen.org> <xen-users@lists.xen.org>; David
TECHER
> <davidtecher@yahoo.fr> <davidtecher@yahoo.fr>; Teo En Ming
(Zhang Enming)
> <singapore.mr.teo.en.ming@gmail.com>
<singapore.mr.teo.en.ming@gmail.com>
> *Envoyé le :* Mardi 20 mars 2012 8h39
> *Objet :* Xen VGA Passthrough Questions
>
> Dear David Techer,
>
> I have read through your article on Xen VGA passthrough on
> http://www.davidgis.fr.
>
> It appears that the following command on your blog doesn''t work.
>
> dmesg | grep 01:00.0 | grep BAR
>
> The above command shows nothing at all. Is there an alternative solution?
>
> Thank you very much.
>
> Yours sincerely,
>
> Teo En Ming (Zhang Enming)
>
>
>
>
>
>
>
> _______________________________________________
> Xen-users mailing list
> Xen-users@lists.xen.org
> http://lists.xen.org/xen-users
>

_______________________________________________
Xen-users mailing list
Xen-users@lists.xen.org
http://lists.xen.org/xen-users

Teo En Ming (Zhang Enming)

2012-Mar-21 04:06 UTC

head link

Re: Re : Re : Xen VGA Passthrough Questions

Teo En Ming (Zhang Enming)

2012-Mar-21 04:17 UTC

head link

How to Stop lightdm Display Manager and X.org X Server in UBUNTU 11.10 and Unload nouveau Kernel Module? (Xen VGA Passthrough)

David TECHER

2012-Mar-21 09:25 UTC

head link

Re : Re : Re : Xen VGA Passthrough Questions

You need to add nouveau.blacklist=1 in the grub.cfg of your domU

Have access to partition table of your domU using kpartx

kpart -va /dev/path/to/your/LVM/domU

mount /dev/mapper/.../....       /path/where/to/mount

vim //path/where/to/mount/boot/grub/grub.cfg

add nouveau.blacklist=1 to the module line.

Umount  /path/where/to/mount

kpart -vd /dev/path/to/your/LVM/domU

boot your domU

Install NVIDIA driver.






________________________________
 De : Teo En Ming (Zhang Enming) <singapore.mr.teo.en.ming@gmail.com>
À : Casey DeLorme <cdelorme@gmail.com> 
Cc : David TECHER <davidtecher@yahoo.fr>;
"xen-users@lists.xen.org" <xen-users@lists.xen.org>; Teo En Ming
(Zhang Enming) <singapore.mr.teo.en.ming@gmail.com>
Envoyé le : Mercredi 21 mars 2012 5h06
Objet : Re: [Xen-users] Re : Re : Xen VGA Passthrough Questions
 

Hi,

How do I stop lightdm display manager and X.org server in Ubuntu
    11.10 and unload the nouveau vga driver?

I can run "sudo killall lightdm" and lightdm and X.org X server will
    be terminated successfully, but I cannot force nouveau to unload at
    all. It always say nouveau module is in use even if I use "sudo
    modprobe --force --remove nouveau".

I need to unload the following kernel modules for successful Xen VGA
    passthrough.

rmmod nouveau rmmod ttm rmmod drm_kms_helper rmmod drm Please read Deactivating
KMS and unloading Nouveau at
http://nouveau.freedesktop.org/wiki/KernelModeSetting
But setting "echo 0 > /sys/class/vtconsole/vtcon1/bind" causes the
display to hang and I can''t do anything more at all.

I can''t force nouveau,ttm,drm_kms_helper,drm kernel modules to unload.
Help!!! Also, if I add xen-pciback.hide=(01:00.0) to the module line in GRUB2,
the display turns blank while booting and I can''t do anything at all.
Any ideas? Thank you very much. Yours sincerely, Teo En Ming (Zhang Enming)
On 21/03/2012 00:36, Casey DeLorme wrote: 
Hello,>
>
>Supposedly both the board & CPU must have VT-d, the E6300 does not:
>http://ark.intel.com/products/41493/Intel-Pentium-Processor-E6300-(2M-Cache-2_80-GHz-1066-MHz-FSB)
>
>
>If pciback was compiled into your kernel (not a module) then you can add
"xen-pciback.hide=(01:00.0)" to the module line in your grub.cfg,
substituting your lspci device names.
>
>
>nVidia supposedly requires patches and only works in Windows XP, there are a
few Windows 7 success stories, but they seem rare.  Most people have success
without patches using AMD cards.
>
>
>Best of luck.
>
>
>~Casey DeLorme
>
>
>
>
>On Tue, Mar 20, 2012 at 11:39 AM, Teo En Ming (Zhang Enming)
<singapore.mr.teo.en.ming@gmail.com> wrote:
>
>Dear David Techer and others,
>>
>>I thought Intel H61 chipset and MSI motherboards              officially don''t support VT-x and VT-d? There is no VT-d
              enabling option in MSI motherboard BIOS.>>
>>I want to test Xen VGA passthrough for Windows 8 Consumer              Preview 64-bit English HVM domU with my Intel DQ45CB
              motherboard and Intel Pentium Dual Core E6300 2800
MHz.>>
>>By the way, I am using Linux kernel 3.3.0 Final. Should I              use PCIBACK or PCI-STUB? If I use pciback, what arguments
              should I parse to the kernel command line in GRUB2? Please
              point me to the documentation for kernel command line
              arguments in the linux kernel source tree.>>
>>My graphics card: Palit NVIDIA Geforce 8400 GS PCI Express
              x16 SGD$44 >>
>>
>>Thank you very much.
>>
>>Yours sincerely,
>>
>>Teo En Ming (Zhang Enming)
>>
>>
>>
>>On 20/03/2012 23:17, David TECHER wrote: 
>>You''re welcome.
>>>
>>>
>>>Keep in mind that if you are going to upgrade BIOS for your
motherboard, those values for your card may changed.
>>>
>>>
>>>I was in this situation last time  BIOS was upgraded.
>>>
>>>
>>>It does mean that those values will changed each time you upgrade
your motherboad BIOS but having thos values changed after a BIOS upgrade could
occur for a specific upgrade.
>>>
>>>
>>>Don''t ask me why...I do not know.
>>>
>>>
>>>So you will be well advised to heck those values for each BIOS
upgrade.
>>>
>>>
>>>Moreover don''t waste your time to test VGA PassThrough for
NVIDIA for Windows  7. For Windows 7 use ATI.
>>>
>>>
>>>
>>>I did my tests for playing with wine 1.4/1.5 on domU Ubuntu Lucid
10.04.4 PV HVM (game like Crysis 2) and it rocks :)
>>>
>>>
>>>
>>>My configuration:
>>>
>>>
>>>Manufacturer: MSI / Product Name: H61MU-E35 (MS-7680) 
>>>
>>>Bios version: V10.11
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>________________________________
>>> De : Teo En Ming (Zhang Enming)
<singapore.mr.teo.en.ming@gmail.com>
>>>À : David TECHER <davidtecher@yahoo.fr> 
>>>Cc : "xen-users@lists.xen.org"
<xen-users@lists.xen.org>; Teo En Ming (Zhang Enming)
<singapore.mr.teo.en.ming@gmail.com>
>>>Envoyé le : Mardi 20 mars 2012 16h02
>>>Objet : Re: Re : Xen VGA Passthrough Questions
>>> 
>>>
>>>Dear David Techer,
>>>
>>>Thank you.
>>>
>>>I think the following command is
                              sufficient.>>>
>>>dmesg | grep 01:00.0 | grep "pci.*mem"
>>>
>>>Yours sincerely,
>>>
>>>Teo En Ming (Zhang Enming)
>>>
>>>On 20/03/2012 17:54, David TECHER wrote: 
>>>Hi Teo,
>>>>
>>>>
>>>>The 3 first lines with pattern ''pci.*mem'' need
to be returned
>>>>
>>>>
>>>>
>>>>U need to use somethign like 
>>>>
>>>>
>>>>
>>>>root@gemini:~# lspci |grep VGA
>>>>02:00.0 VGA compatible controller:                                      nVidia Corporation Device 0ca2
                                      (rev a2)>>>>root@gemini:~# dmesg|grep 02:00.0                                      |grep '' pci
[0-9].*mem''|head -n3>>>>[    0.174458] pci 0000:02:00.0:                                      reg 10: [mem
                                     
0xfb000000-0xfbffffff]>>>>[    0.174466] pci 0000:02:00.0:                                      reg 14: [mem 0xd0000000-0xdfffffff
                                      64bit pref]>>>>[    0.174475] pci 0000:02:00.0:                                      reg 1c: [mem 0xee000000-0xefffffff
                                      64bit pref]>>>>
>>>>
>>>>
>>>>Kind regards
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>________________________________
>>>> De : Teo En Ming (Zhang Enming)
<singapore.mr.teo.en.ming@gmail.com>
>>>>À : "xen-users@lists.xen.org"
<xen-users@lists.xen.org>; David TECHER <davidtecher@yahoo.fr>; Teo
En Ming (Zhang Enming) <singapore.mr.teo.en.ming@gmail.com>
>>>>Envoyé le : Mardi 20 mars 2012 8h39
>>>>Objet : Xen VGA Passthrough Questions
>>>> 
>>>>Dear David Techer,
>>>>
>>>>I have read through your article                                      on Xen VGA passthrough on
http://www.davidgis.fr.>>>>
>>>>It appears that the following                                      command on your blog doesn''t
work.>>>>
>>>>dmesg | grep 01:00.0 | grep BAR
>>>>
>>>>The above command shows nothing at                                      all. Is there an alternative
                                      solution?>>>>
>>>>Thank you very much.
>>>>
>>>>Yours sincerely,
>>>>
>>>>Teo En Ming (Zhang Enming)
>>>>
>>>>
>>>>
>>>
>>>
>>>
>>
>>_______________________________________________
>>Xen-users mailing list
>>Xen-users@lists.xen.org
>>http://lists.xen.org/xen-users
>>
>
_______________________________________________
Xen-users mailing list
Xen-users@lists.xen.org
http://lists.xen.org/xen-users

David TECHER

2012-Mar-21 09:56 UTC

head link

Re : Re : Re : Xen VGA Passthrough Questions

You need to add nouveau.blacklist=1 in the module line of grub.cfg


To do for a domU
===========

Have access to partition table of your domU using kpartx

kpart -va /dev/path/to/your/LVM/domU

mount /dev/mapper/.../....       /path/where/to/mount

vim //path/where/to/mount/boot/grub/grub.cfg

add nouveau.blacklist=1 to the module line.

Umount  /path/where/to/mount

kpart -vd /dev/path/to/your/LVM/domU

boot your domU

Install NVIDIA driver.


________________________________
 De : David TECHER <davidtecher@yahoo.fr>
À : Teo En Ming (Zhang Enming) <singapore.mr.teo.en.ming@gmail.com>; Casey
DeLorme <cdelorme@gmail.com>
Cc : "xen-users@lists.xen.org" <xen-users@lists.xen.org> 
Envoyé le : Mercredi 21 mars 2012 10h25
Objet : Re : [Xen-users] Re : Re : Xen VGA Passthrough Questions
 

You need to add nouveau.blacklist=1 in the grub.cfg of your domU

Have access to partition table of your domU using kpartx

kpart -va /dev/path/to/your/LVM/domU

mount /dev/mapper/.../....       /path/where/to/mount

vim //path/where/to/mount/boot/grub/grub.cfg

add nouveau.blacklist=1 to the module line.

Umount  /path/where/to/mount

kpart -vd /dev/path/to/your/LVM/domU

boot your domU

Install NVIDIA driver.






________________________________
 De : Teo En Ming (Zhang Enming) <singapore.mr.teo.en.ming@gmail.com>
À : Casey DeLorme <cdelorme@gmail.com> 
Cc : David TECHER <davidtecher@yahoo.fr>;
"xen-users@lists.xen.org" <xen-users@lists.xen.org>; Teo En Ming
(Zhang Enming) <singapore.mr.teo.en.ming@gmail.com>
Envoyé le : Mercredi 21 mars 2012 5h06
Objet : Re: [Xen-users] Re : Re : Xen VGA Passthrough Questions
 

Hi,

How do I stop lightdm display manager and X.org server in Ubuntu
    11.10 and unload the nouveau vga driver?

I can run "sudo killall lightdm" and lightdm and X.org X server will
    be terminated successfully, but I cannot force nouveau to unload at
    all. It always say nouveau module is in use even if I use "sudo
    modprobe --force --remove nouveau".

I need to unload the following kernel modules for successful Xen VGA
    passthrough.

rmmod nouveau rmmod ttm rmmod drm_kms_helper rmmod drm Please read Deactivating
KMS and unloading Nouveau at
http://nouveau.freedesktop.org/wiki/KernelModeSetting
But setting "echo 0 > /sys/class/vtconsole/vtcon1/bind" causes the
display to hang and I can''t do anything more at all.

I can''t force nouveau,ttm,drm_kms_helper,drm kernel modules to unload.
Help!!! Also, if I add xen-pciback.hide=(01:00.0) to the module line in GRUB2,
the display turns blank while booting and I can''t do anything at all.
Any ideas? Thank you very much. Yours sincerely, Teo En Ming (Zhang Enming)
On 21/03/2012 00:36, Casey DeLorme wrote: 
Hello,>
>
>Supposedly both the board & CPU must have VT-d, the E6300 does not:
>http://ark.intel.com/products/41493/Intel-Pentium-Processor-E6300-(2M-Cache-2_80-GHz-1066-MHz-FSB)
>
>
>If pciback was compiled into your kernel (not a module) then you can add
"xen-pciback.hide=(01:00.0)" to the module line in your grub.cfg,
substituting your lspci device names.
>
>
>nVidia supposedly requires patches and only works in Windows XP, there are a
few Windows 7 success stories, but they seem rare.  Most people have success
without patches using AMD cards.
>
>
>Best of luck.
>
>
>~Casey DeLorme
>
>
>
>
>On Tue, Mar 20, 2012 at 11:39 AM, Teo En Ming (Zhang Enming)
<singapore.mr.teo.en.ming@gmail.com> wrote:
>
>Dear David Techer and others,
>>
>>I thought Intel H61 chipset and MSI motherboards              officially don''t support VT-x and VT-d? There is no VT-d
              enabling option in MSI motherboard BIOS.>>
>>I want to test Xen VGA passthrough for Windows 8 Consumer              Preview 64-bit English HVM domU with my Intel DQ45CB
              motherboard and Intel Pentium Dual Core E6300 2800
MHz.>>
>>By the way, I am using Linux kernel 3.3.0 Final. Should I              use PCIBACK or PCI-STUB? If I use pciback, what arguments
              should I parse to the kernel command line in GRUB2? Please
              point me to the documentation for kernel command line
              arguments in the linux kernel source tree.>>
>>My graphics card: Palit NVIDIA Geforce 8400 GS PCI Express
              x16 SGD$44 >>
>>
>>Thank you very much.
>>
>>Yours sincerely,
>>
>>Teo En Ming (Zhang Enming)
>>
>>
>>
>>On 20/03/2012 23:17, David TECHER wrote: 
>>You''re welcome.
>>>
>>>
>>>Keep in mind that if you are going to upgrade BIOS for your
motherboard, those values for your card may changed.
>>>
>>>
>>>I was in this situation last time  BIOS was upgraded.
>>>
>>>
>>>It does mean that those values will changed each time you upgrade
your motherboad BIOS but having thos values changed after a BIOS upgrade could
occur for a specific upgrade.
>>>
>>>
>>>Don''t ask me why...I do not know.
>>>
>>>
>>>So you will be well advised to heck those values for each BIOS
upgrade.
>>>
>>>
>>>Moreover don''t waste your time to test VGA PassThrough for
NVIDIA for Windows  7. For Windows 7 use ATI.
>>>
>>>
>>>
>>>I did my tests for playing with wine 1.4/1.5 on domU Ubuntu Lucid
10.04.4 PV HVM (game like Crysis 2) and it rocks :)
>>>
>>>
>>>
>>>My configuration:
>>>
>>>
>>>Manufacturer: MSI / Product Name: H61MU-E35 (MS-7680) 
>>>
>>>Bios version: V10.11
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>________________________________
>>> De : Teo En Ming (Zhang Enming)
<singapore.mr.teo.en.ming@gmail.com>
>>>À : David TECHER <davidtecher@yahoo.fr> 
>>>Cc : "xen-users@lists.xen.org"
<xen-users@lists.xen.org>; Teo En Ming (Zhang Enming)
<singapore.mr.teo.en.ming@gmail.com>
>>>Envoyé le : Mardi 20 mars 2012 16h02
>>>Objet : Re: Re : Xen VGA Passthrough Questions
>>> 
>>>
>>>Dear David Techer,
>>>
>>>Thank you.
>>>
>>>I think the following command is
                              sufficient.>>>
>>>dmesg | grep 01:00.0 | grep "pci.*mem"
>>>
>>>Yours sincerely,
>>>
>>>Teo En Ming (Zhang Enming)
>>>
>>>On 20/03/2012 17:54, David TECHER wrote: 
>>>Hi Teo,
>>>>
>>>>
>>>>The 3 first lines with pattern ''pci.*mem'' need
to be returned
>>>>
>>>>
>>>>
>>>>U need to use somethign like 
>>>>
>>>>
>>>>
>>>>root@gemini:~# lspci |grep VGA
>>>>02:00.0 VGA compatible controller:                                      nVidia Corporation Device 0ca2
                                      (rev a2)>>>>root@gemini:~# dmesg|grep 02:00.0                                      |grep '' pci
[0-9].*mem''|head -n3>>>>[    0.174458] pci 0000:02:00.0:                                      reg 10: [mem
                                     
0xfb000000-0xfbffffff]>>>>[    0.174466] pci 0000:02:00.0:                                      reg 14: [mem 0xd0000000-0xdfffffff
                                      64bit pref]>>>>[    0.174475] pci 0000:02:00.0:                                      reg 1c: [mem 0xee000000-0xefffffff
                                      64bit pref]>>>>
>>>>
>>>>
>>>>Kind regards
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>________________________________
>>>> De : Teo En Ming (Zhang Enming)
<singapore.mr.teo.en.ming@gmail.com>
>>>>À : "xen-users@lists.xen.org"
<xen-users@lists.xen.org>; David TECHER <davidtecher@yahoo.fr>; Teo
En Ming (Zhang Enming) <singapore.mr.teo.en.ming@gmail.com>
>>>>Envoyé le : Mardi 20 mars 2012 8h39
>>>>Objet : Xen VGA Passthrough Questions
>>>> 
>>>>Dear David Techer,
>>>>
>>>>I have read through your article                                      on Xen VGA passthrough on
http://www.davidgis.fr.>>>>
>>>>It appears that the following                                      command on your blog doesn''t
work.>>>>
>>>>dmesg | grep 01:00.0 | grep BAR
>>>>
>>>>The above command shows nothing at                                      all. Is there an alternative
                                      solution?>>>>
>>>>Thank you very much.
>>>>
>>>>Yours sincerely,
>>>>
>>>>Teo En Ming (Zhang Enming)
>>>>
>>>>
>>>>
>>>
>>>
>>>
>>
>>_______________________________________________
>>Xen-users mailing list
>>Xen-users@lists.xen.org
>>http://lists.xen.org/xen-users
>>
>
_______________________________________________
Xen-users mailing list
Xen-users@lists.xen.org
http://lists.xen.org/xen-users

Teo En Ming (Zhang Enming)

2012-Mar-21 10:02 UTC

head link

Re: Re : Re : Re : Xen VGA Passthrough Questions

David TECHER

2012-Mar-21 11:09 UTC

head link

Re : Re : Re : Re : Xen VGA Passthrough Questions

My domU Windows XP works perfectly with changeset 25070

Did you read http://wiki.xen.org/wiki/Xen_VGA_Passthrough carefully?

As noticed in your document I am not used to compil my kernel using 


make world

I''ve got a doubt about building your kernel this way, your kernel will
have all required support for VGA PassThrough

I''m used to compil from 3.1.10


Extract from documentation on Wiki


=========
Xen VGA passthru requirements from dom0 kernel 
Make sure your dom0 Linux kernel has "CONFIG_XEN_PCIDEV_BACKEND_PASS"
option enabled. "CONFIG_XEN_PCIDEV_BACKEND_VPCI" should be disabled.
For example Debian Squeeze 2.6.32 kernel has the wrong PCIDEV_BACKEND 
mode as a default.. so in that case you might need to recompile the 
kernel with custom .config to get the right backend mode in use. 
BACKEND_PASS mode means the PCI IDs of the PCI device (graphics card) 
will be the same in the VM as in dom0/host.
==============

So you need to download kernel 3.3 sources and compil it properly.

Tonight (EST Time so in more than 8 hours ) I will have a try for kernel 3.3 and
see if I have the same error an will let you know.












________________________________
 De : Teo En Ming (Zhang Enming) <singapore.mr.teo.en.ming@gmail.com>
À : David TECHER <davidtecher@yahoo.fr> 
Cc : Casey DeLorme <cdelorme@gmail.com>;
"xen-users@lists.xen.org" <xen-users@lists.xen.org>; Teo En Ming
(Zhang Enming) <singapore.mr.teo.en.ming@gmail.com>
Envoyé le : Mercredi 21 mars 2012 11h02
Objet : Re: Re : [Xen-users] Re : Re : Xen VGA Passthrough Questions
 

Dear David Techer,

Thank you for your reply.

I am using Windows XP / Windows 8 Consumer Preview HVM domU and not
    Linux HVM domU.

Please read my Xen VGA Passthrough - Version 1.0.PDF and see whether
    I am missing out or making any wrong steps.

Yours sincerely,

Teo En Ming (Zhang Enming)

On 21/03/2012 17:25, David TECHER wrote: 
You need to add nouveau.blacklist=1 in the grub.cfg of your
domU>
>Have access to partition table of your domU using kpartx
>
>kpart -va /dev/path/to/your/LVM/domU
>
>mount /dev/mapper/.../....       /path/where/to/mount
>
>vim //path/where/to/mount/boot/grub/grub.cfg
>
>add nouveau.blacklist=1 to the module line.
>
>Umount /path/where/to/mount
>
>kpart -vd /dev/path/to/your/LVM/domU
>
>boot your domU
>
>Install NVIDIA driver.
>
>
>
>
>
>
>________________________________
> De : Teo En Ming (Zhang Enming) <singapore.mr.teo.en.ming@gmail.com>
>À : Casey DeLorme <cdelorme@gmail.com> 
>Cc : David TECHER <davidtecher@yahoo.fr>;
"xen-users@lists.xen.org" <xen-users@lists.xen.org>; Teo En Ming
(Zhang Enming) <singapore.mr.teo.en.ming@gmail.com>
>Envoyé le : Mercredi 21 mars 2012 5h06
>Objet : Re: [Xen-users] Re : Re : Xen VGA Passthrough Questions
> 
>
>Hi,
>
>How do I stop lightdm display manager and X.org server                in Ubuntu 11.10 and unload the nouveau vga
driver?>
>I can run "sudo killall lightdm" and lightdm and X.org X                server will be terminated successfully, but I cannot
                force nouveau to unload at all. It always say nouveau
                module is in use even if I use "sudo modprobe --force
                --remove nouveau".>
>I need to unload the following kernel modules for
                successful Xen VGA passthrough.>
>rmmod nouveau rmmod ttm rmmod drm_kms_helper rmmod drm Please read
Deactivating KMS and unloading Nouveau at
http://nouveau.freedesktop.org/wiki/KernelModeSetting
>But setting "echo 0 > /sys/class/vtconsole/vtcon1/bind" causes
the display to hang and I can''t do anything more at all.
>
>I can''t force nouveau,ttm,drm_kms_helper,drm kernel modules to
unload. Help!!! Also, if I add xen-pciback.hide=(01:00.0) to the module line in
GRUB2, the display turns blank while booting and I can''t do anything at
all. Any ideas? Thank you very much. Yours sincerely, Teo En Ming (Zhang Enming)
>On 21/03/2012 00:36, Casey DeLorme wrote: 
>Hello,
>>
>>
>>Supposedly both the board & CPU must have VT-d, the E6300 does not:
>>http://ark.intel.com/products/41493/Intel-Pentium-Processor-E6300-(2M-Cache-2_80-GHz-1066-MHz-FSB)
>>
>>
>>If pciback was compiled into your kernel (not a module) then you can add
"xen-pciback.hide=(01:00.0)" to the module line in your grub.cfg,
substituting your lspci device names.
>>
>>
>>nVidia supposedly requires patches and only works in Windows XP, there
are a few Windows 7 success stories, but they seem rare.  Most people have
success without patches using AMD cards.
>>
>>
>>Best of luck.
>>
>>
>>~Casey DeLorme
>>
>>
>>
>>
>>On Tue, Mar 20, 2012 at 11:39 AM, Teo En Ming (Zhang Enming)
<singapore.mr.teo.en.ming@gmail.com> wrote:
>>
>>Dear David Techer and others,
>>>
>>>I thought Intel H61 chipset and MSI                          motherboards officially don''t support VT-x
and
                          VT-d? There is no VT-d enabling option in MSI
                          motherboard BIOS.>>>
>>>I want to test Xen VGA passthrough for Windows                          8 Consumer Preview 64-bit English HVM domU
                          with my Intel DQ45CB motherboard and Intel
                          Pentium Dual Core E6300 2800
MHz.>>>
>>>By the way, I am using Linux kernel 3.3.0                          Final. Should I use PCIBACK or PCI-STUB? If I
                          use pciback, what arguments should I parse to
                          the kernel command line in GRUB2? Please point
                          me to the documentation for kernel command
                          line arguments in the linux kernel source
                          tree.>>>
>>>My graphics card: Palit NVIDIA Geforce 8400 GS
                          PCI Express x16 SGD$44 >>>
>>>
>>>Thank you very much.
>>>
>>>Yours sincerely,
>>>
>>>Teo En Ming (Zhang Enming)
>>>
>>>
>>>
>>>On 20/03/2012 23:17, David TECHER wrote: 
>>>You''re welcome.
>>>>
>>>>
>>>>Keep in mind that if you are going to upgrade BIOS for your
motherboard, those values for your card may changed.
>>>>
>>>>
>>>>I was in this situation last time  BIOS was upgraded.
>>>>
>>>>
>>>>It does mean that those values will changed each time you
upgrade your motherboad BIOS but having thos values changed after a BIOS upgrade
could occur for a specific upgrade.
>>>>
>>>>
>>>>Don''t ask me why...I do not know.
>>>>
>>>>
>>>>So you will be well advised to heck those values for each BIOS
upgrade.
>>>>
>>>>
>>>>Moreover don''t waste your time to test VGA PassThrough
for NVIDIA for Windows  7. For Windows 7 use ATI.
>>>>
>>>>
>>>>
>>>>I did my tests for playing with wine 1.4/1.5 on domU Ubuntu
Lucid 10.04.4 PV HVM (game like Crysis 2) and it rocks :)
>>>>
>>>>
>>>>
>>>>My configuration:
>>>>
>>>>
>>>>Manufacturer: MSI / Product Name: H61MU-E35 (MS-7680) 
>>>>
>>>>Bios version: V10.11
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>________________________________
>>>> De : Teo En Ming (Zhang Enming)
<singapore.mr.teo.en.ming@gmail.com>
>>>>À : David TECHER <davidtecher@yahoo.fr> 
>>>>Cc : "xen-users@lists.xen.org"
<xen-users@lists.xen.org>; Teo En Ming (Zhang Enming)
<singapore.mr.teo.en.ming@gmail.com>
>>>>Envoyé le : Mardi 20 mars 2012 16h02
>>>>Objet : Re: Re : Xen VGA Passthrough Questions
>>>> 
>>>>
>>>>Dear David Techer,
>>>>
>>>>Thank you.
>>>>
>>>>I think the following command
                                          is sufficient.>>>>
>>>>dmesg | grep 01:00.0 | grep                                         
"pci.*mem">>>>
>>>>Yours sincerely,
>>>>
>>>>Teo En Ming (Zhang Enming)
>>>>
>>>>On 20/03/2012 17:54, David
                                          TECHER wrote: >>>>Hi Teo,
>>>>>
>>>>>
>>>>>The 3 first lines with pattern ''pci.*mem''
need to be returned
>>>>>
>>>>>
>>>>>
>>>>>U need to use somethign like 
>>>>>
>>>>>
>>>>>
>>>>>root@gemini:~# lspci |grep VGA
>>>>>02:00.0 VGA compatible                                                  controller: nVidia
                                                  Corporation Device
                                                  0ca2 (rev
a2)>>>>>root@gemini:~#                                                  dmesg|grep 02:00.0
                                                  |grep '' pci
                                                  [0-9].*mem''|head
-n3>>>>>[    0.174458] pci                                                  0000:02:00.0: reg 10:
                                                  [mem
                                                 
0xfb000000-0xfbffffff]>>>>>[    0.174466] pci                                                  0000:02:00.0: reg 14:
                                                  [mem
                                                  0xd0000000-0xdfffffff
                                                  64bit
pref]>>>>>[    0.174475] pci                                                  0000:02:00.0: reg 1c:
                                                  [mem
                                                  0xee000000-0xefffffff
                                                  64bit
pref]>>>>>
>>>>>
>>>>>
>>>>>Kind regards
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>________________________________
>>>>> De : Teo En Ming (Zhang Enming)
<singapore.mr.teo.en.ming@gmail.com>
>>>>>À : "xen-users@lists.xen.org"
<xen-users@lists.xen.org>; David TECHER <davidtecher@yahoo.fr>; Teo
En Ming (Zhang Enming) <singapore.mr.teo.en.ming@gmail.com>
>>>>>Envoyé le : Mardi 20 mars 2012 8h39
>>>>>Objet : Xen VGA Passthrough Questions
>>>>> 
>>>>>Dear David Techer,
>>>>>
>>>>>I have read through                                                  your article on Xen
                                                  VGA passthrough on
http://www.davidgis.fr.>>>>>
>>>>>It appears that the                                                  following command on
                                                  your blog doesn''t
                                                  work.>>>>>
>>>>>dmesg | grep 01:00.0 |                                                  grep
BAR>>>>>
>>>>>The above command                                                  shows nothing at all.
                                                  Is there an
                                                  alternative
solution?>>>>>
>>>>>Thank you very much.
>>>>>
>>>>>Yours sincerely,
>>>>>
>>>>>Teo En Ming (Zhang                                                 
Enming)>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>>
>>>
>>>_______________________________________________
>>>Xen-users mailing list
>>>Xen-users@lists.xen.org
>>>http://lists.xen.org/xen-users
>>>
>>
>
>
>
_______________________________________________
Xen-users mailing list
Xen-users@lists.xen.org
http://lists.xen.org/xen-users

Teo En Ming (Zhang Enming)

2012-Mar-21 11:36 UTC

head link

Re: Re : Re : Re : Re : Xen VGA Passthrough Questions

David TECHER

2012-Mar-21 13:40 UTC

head link

Re : Re : Re : Re : Re : Xen VGA Passthrough Questions

Windows XP......OK

Windows 2008...KO


2008 is based on Vista. It may not work for NVIDIA. (ATI should work).


I will not waste my time to help you if you don''t take into account
these informations.






________________________________
 De : Teo En Ming (Zhang Enming) <singapore.mr.teo.en.ming@gmail.com>
À : David TECHER <davidtecher@yahoo.fr> 
Cc : "xen-users@lists.xen.org" <xen-users@lists.xen.org>; Casey
DeLorme <cdelorme@gmail.com>; Teo En Ming (Zhang Enming)
<singapore.mr.teo.en.ming@gmail.com>
Envoyé le : Mercredi 21 mars 2012 12h36
Objet : Re: [Xen-users] Re : Re :  Re : Re : Xen VGA Passthrough Questions
 

Dear David Techer,

Thank you for your reply.

I am already using Linux Kernel 3.3.0 final.

I will be making changes to my compilation steps for Xen
    4.2-unstable changeset 25070.

Let''s see how.

Yours sincerely,

Teo En Ming (Zhang Enming)

On 21/03/2012 19:09, David TECHER wrote: 
My domU Windows XP works perfectly with changeset 25070>
>Did you read http://wiki.xen.org/wiki/Xen_VGA_Passthrough carefully?
>
>As noticed in your document I am not used to compil my kernel
        using > 
>
>
>make world
>
>
>I''ve got a doubt about building your kernel this way, your kernel
will have all required support for VGA PassThrough
>
>
>I''m used to compil from 3.1.10
>
>
>
>Extract from documentation on Wiki
>
>
>
>=========>
>Xen VGA passthru requirements from dom0 kernel 
>Make sure your dom0 Linux kernel has
"CONFIG_XEN_PCIDEV_BACKEND_PASS" option enabled.
"CONFIG_XEN_PCIDEV_BACKEND_VPCI" should be disabled. For example
Debian Squeeze 2.6.32 kernel has the wrong PCIDEV_BACKEND mode as a default.. so
in that case you might need to recompile the kernel with custom .config to get
the right backend mode in use. BACKEND_PASS mode means the PCI IDs of the PCI
device (graphics card) will be the same in the VM as in dom0/host.
>==============>
>
>
>So you need to download kernel 3.3 sources and compil it properly.
>
>
>Tonight (EST Time so in more than 8 hours ) I will have a try for kernel 3.3
and see if I have the same error an will let you know.
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>________________________________
> De : Teo En Ming (Zhang Enming) <singapore.mr.teo.en.ming@gmail.com>
>À : David TECHER <davidtecher@yahoo.fr> 
>Cc : Casey DeLorme <cdelorme@gmail.com>;
"xen-users@lists.xen.org" <xen-users@lists.xen.org>; Teo En Ming
(Zhang Enming) <singapore.mr.teo.en.ming@gmail.com>
>Envoyé le : Mercredi 21 mars 2012 11h02
>Objet : Re: Re : [Xen-users] Re : Re : Xen VGA Passthrough Questions
> 
>
>Dear David Techer,
>
>Thank you for your reply.
>
>I am using Windows XP / Windows 8 Consumer Preview HVM
                domU and not Linux HVM domU.>
>Please read my Xen VGA Passthrough - Version 1.0.PDF and                see whether I am missing out or making any wrong
steps.>
>Yours sincerely,
>
>Teo En Ming (Zhang Enming)
>
>On 21/03/2012 17:25, David TECHER wrote: 
>You need to add nouveau.blacklist=1 in the grub.cfg of your domU
>>
>>Have access to partition table of your domU using
                    kpartx>>
>>kpart -va /dev/path/to/your/LVM/domU
>>
>>mount /dev/mapper/.../....      
                    /path/where/to/mount>>
>>vim //path/where/to/mount/boot/grub/grub.cfg
>>
>>add nouveau.blacklist=1 to the module line.
>>
>>Umount /path/where/to/mount
>>
>>kpart -vd /dev/path/to/your/LVM/domU
>>
>>boot your domU
>>
>>Install NVIDIA driver.
>>
>>
>>
>>
>>
>>
>>________________________________
>> De : Teo En Ming (Zhang Enming)
<singapore.mr.teo.en.ming@gmail.com>
>>À : Casey DeLorme <cdelorme@gmail.com> 
>>Cc : David TECHER <davidtecher@yahoo.fr>;
"xen-users@lists.xen.org" <xen-users@lists.xen.org>; Teo En Ming
(Zhang Enming) <singapore.mr.teo.en.ming@gmail.com>
>>Envoyé le : Mercredi 21 mars 2012 5h06
>>Objet : Re: [Xen-users] Re : Re : Xen VGA Passthrough Questions
>> 
>>
>>Hi,
>>
>>How do I stop lightdm display manager and                            X.org server in Ubuntu 11.10 and unload the
                            nouveau vga driver?>>
>>I can run "sudo killall lightdm" and lightdm                            and X.org X server will be terminated
                            successfully, but I cannot force nouveau to
                            unload at all. It always say nouveau module
                            is in use even if I use "sudo modprobe
                            --force --remove
nouveau".>>
>>I need to unload the following kernel                            modules for successful Xen VGA
passthrough.>>
>>rmmod nouveau rmmod ttm rmmod drm_kms_helper rmmod drm Please read
Deactivating KMS and unloading Nouveau at
http://nouveau.freedesktop.org/wiki/KernelModeSetting
>>But setting "echo 0 > /sys/class/vtconsole/vtcon1/bind"
causes the display to hang and I can''t do anything more at all.
>>
>>I can''t force nouveau,ttm,drm_kms_helper,drm kernel modules to
unload. Help!!! Also, if I add xen-pciback.hide=(01:00.0) to the module line in
GRUB2, the display turns blank while booting and I can''t do anything at
all. Any ideas? Thank you very much. Yours sincerely, Teo En Ming (Zhang Enming)
>>On 21/03/2012 00:36, Casey DeLorme wrote: 
>>Hello,
>>>
>>>
>>>Supposedly both the board & CPU must have VT-d, the E6300 does
not:
>>>http://ark.intel.com/products/41493/Intel-Pentium-Processor-E6300-(2M-Cache-2_80-GHz-1066-MHz-FSB)
>>>
>>>
>>>If pciback was compiled into your kernel (not a module) then you can
add "xen-pciback.hide=(01:00.0)" to the module line in your grub.cfg,
substituting your lspci device names.
>>>
>>>
>>>nVidia supposedly requires patches and only works in Windows XP,
there are a few Windows 7 success stories, but they seem rare.  Most people have
success without patches using AMD cards.
>>>
>>>
>>>Best of luck.
>>>
>>>
>>>~Casey DeLorme
>>>
>>>
>>>
>>>
>>>On Tue, Mar 20, 2012 at 11:39 AM, Teo En Ming (Zhang Enming)
<singapore.mr.teo.en.ming@gmail.com> wrote:
>>>
>>>Dear David Techer and others,
>>>>
>>>>I thought Intel H61 chipset and                                      MSI motherboards officially don''t
                                      support VT-x and VT-d? There is no
                                      VT-d enabling option in MSI
                                      motherboard BIOS.>>>>
>>>>I want to test Xen VGA passthrough                                      for Windows 8 Consumer Preview
                                      64-bit English HVM domU with my
                                      Intel DQ45CB motherboard and Intel
                                      Pentium Dual Core E6300 2800
MHz.>>>>
>>>>By the way, I am using Linux                                      kernel 3.3.0 Final. Should I use
                                      PCIBACK or PCI-STUB? If I use
                                      pciback, what arguments should I
                                      parse to the kernel command line
                                      in GRUB2? Please point me to the
                                      documentation for kernel command
                                      line arguments in the linux kernel
                                      source tree.>>>>
>>>>My graphics card: Palit NVIDIA                                      Geforce 8400 GS PCI Express x16
                                      SGD$44 >>>>
>>>>
>>>>Thank you very much.
>>>>
>>>>Yours sincerely,
>>>>
>>>>Teo En Ming (Zhang Enming)
>>>>
>>>>
>>>>
>>>>On 20/03/2012 23:17, David TECHER wrote: 
>>>>You''re welcome.
>>>>>
>>>>>
>>>>>Keep in mind that if you are going to upgrade BIOS for your
motherboard, those values for your card may changed.
>>>>>
>>>>>
>>>>>I was in this situation last time  BIOS was upgraded.
>>>>>
>>>>>
>>>>>It does mean that those values will changed each time you
upgrade your motherboad BIOS but having thos values changed after a BIOS upgrade
could occur for a specific upgrade.
>>>>>
>>>>>
>>>>>Don''t ask me why...I do not know.
>>>>>
>>>>>
>>>>>So you will be well advised to heck those values for each
BIOS upgrade.
>>>>>
>>>>>
>>>>>Moreover don''t waste your time to test VGA
PassThrough for NVIDIA for Windows  7. For Windows 7 use ATI.
>>>>>
>>>>>
>>>>>
>>>>>I did my tests for playing with wine 1.4/1.5 on domU Ubuntu
Lucid 10.04.4 PV HVM (game like Crysis 2) and it rocks :)
>>>>>
>>>>>
>>>>>
>>>>>My configuration:
>>>>>
>>>>>
>>>>>Manufacturer: MSI / Product Name: H61MU-E35 (MS-7680) 
>>>>>
>>>>>Bios version: V10.11
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>________________________________
>>>>> De : Teo En Ming (Zhang Enming)
<singapore.mr.teo.en.ming@gmail.com>
>>>>>À : David TECHER <davidtecher@yahoo.fr> 
>>>>>Cc : "xen-users@lists.xen.org"
<xen-users@lists.xen.org>; Teo En Ming (Zhang Enming)
<singapore.mr.teo.en.ming@gmail.com>
>>>>>Envoyé le : Mardi 20 mars 2012 16h02
>>>>>Objet : Re: Re : Xen VGA Passthrough Questions
>>>>> 
>>>>>
>>>>>Dear David Techer,
>>>>>
>>>>>Thank you.
>>>>>
>>>>>I think the                                                      following command
                                                      is
sufficient.>>>>>
>>>>>dmesg | grep                                                      01:00.0 | grep
                                                     
"pci.*mem">>>>>
>>>>>Yours sincerely,
>>>>>
>>>>>Teo En Ming (Zhang                                                     
Enming)>>>>>
>>>>>On 20/03/2012                                                      17:54, David
                                                      TECHER wrote:
>>>>>Hi Teo,
>>>>>>
>>>>>>
>>>>>>The 3 first lines with pattern
''pci.*mem'' need to be returned
>>>>>>
>>>>>>
>>>>>>
>>>>>>U need to use somethign like 
>>>>>>
>>>>>>
>>>>>>
>>>>>>root@gemini:~# lspci |grep VGA
>>>>>>02:00.0 VGA                                                          compatible
                                                          controller:
                                                          nVidia
                                                          Corporation
                                                          Device 0ca2
                                                          (rev
a2)>>>>>>root@gemini:~#                                                          dmesg|grep
                                                          02:00.0 |grep
                                                          '' pci
                                                         
[0-9].*mem''|head
                                                         
-n3>>>>>>[    0.174458]                                                          pci
                                                          0000:02:00.0:
                                                          reg 10: [mem
                                                         
0xfb000000-0xfbffffff]>>>>>>[    0.174466]                                                          pci
                                                          0000:02:00.0:
                                                          reg 14: [mem
                                                          0xd0000000-0xdfffffff
                                                          64bit
pref]>>>>>>[    0.174475]                                                          pci
                                                          0000:02:00.0:
                                                          reg 1c: [mem
                                                          0xee000000-0xefffffff
                                                          64bit
pref]>>>>>>
>>>>>>
>>>>>>
>>>>>>Kind regards
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>________________________________
>>>>>> De : Teo En Ming (Zhang Enming)
<singapore.mr.teo.en.ming@gmail.com>
>>>>>>À : "xen-users@lists.xen.org"
<xen-users@lists.xen.org>; David TECHER <davidtecher@yahoo.fr>; Teo
En Ming (Zhang Enming) <singapore.mr.teo.en.ming@gmail.com>
>>>>>>Envoyé le : Mardi 20 mars 2012 8h39
>>>>>>Objet : Xen VGA Passthrough Questions
>>>>>> 
>>>>>>Dear David                                                         
Techer,>>>>>>
>>>>>>I have read                                                          through your
                                                          article on Xen
                                                          VGA
                                                          passthrough on
http://www.davidgis.fr.>>>>>>
>>>>>>It appears                                                          that the
                                                          following
                                                          command on
                                                          your blog
                                                          doesn''t
work.>>>>>>
>>>>>>dmesg | grep                                                          01:00.0 | grep
                                                         
BAR>>>>>>
>>>>>>The above                                                          command shows
                                                          nothing at
                                                          all. Is there
                                                          an alternative
                                                         
solution?>>>>>>
>>>>>>Thank you very                                                         
much.>>>>>>
>>>>>>Yours                                                         
sincerely,>>>>>>
>>>>>>Teo En Ming                                                          (Zhang
Enming)>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>_______________________________________________
>>>>Xen-users mailing list
>>>>Xen-users@lists.xen.org
>>>>http://lists.xen.org/xen-users
>>>>
>>>
>>
>>
>>
>
>
>
_______________________________________________
Xen-users mailing list
Xen-users@lists.xen.org
http://lists.xen.org/xen-users

_______________________________________________
Xen-users mailing list
Xen-users@lists.xen.org
http://lists.xen.org/xen-users

Teo En Ming (Zhang Enming)

2012-Mar-21 14:19 UTC

head link

Re: Re : Re : Re : Re : Re : Xen VGA Passthrough Questions

David TECHER

2012-Mar-21 16:44 UTC

head link

Re : Re : Re : Re : Re : Re : Xen VGA Passthrough Questions

And now install NVIDIA drivers and let me know if it is a real success.

Reboot your domU, when logged open your Device manager, use the scroll-bar OR
open Internet Explorer, use the the scrollbar.

Let me know if you don''t have any freeze.

David.



________________________________
 De : Teo En Ming (Zhang Enming) <singapore.mr.teo.en.ming@gmail.com>
À : David TECHER <davidtecher@yahoo.fr> 
Cc : "xen-users@lists.xen.org" <xen-users@lists.xen.org>; Casey
DeLorme <cdelorme@gmail.com>; Teo En Ming (Zhang Enming)
<singapore.mr.teo.en.ming@gmail.com>; Ian Campbell
<Ian.Campbell@citrix.com>
Envoyé le : Mercredi 21 mars 2012 15h19
Objet : Re: Re : [Xen-users] Re : Re :  Re : Re : Xen VGA Passthrough Questions
 

Dear David Techer,

I have just had great success with Xen VGA Passthrough to Windows 8 Consumer
Preview HVM domU and Windows XP HVM domU with Xen 4.2-unstable changeset 25070
in Ubuntu 11.10 64-bit dom0.

I am using Linux kernel 3.3.0. I can observe that you are using
    Debian 6.0.2 from your blog. But I am using Ubuntu 11.10. My
    favorite distro.

Please read my latest documentation "Xen VGA Passthrough - Version
    1.1.pdf".

It is a great success, especially Xen VGA Passthrough to Windows 8
    Consumer Preview. Thank you for your blog.

Yours sincerely,

Teo En Ming (Zhang Enming)


On 21/03/2012 21:40, David TECHER wrote: 
Windows XP......OK>
>
>Windows 2008...KO
>
>
>
>2008 is based on Vista. It may not work for NVIDIA. (ATI should work).
>
>
>
>I will not waste my time to help you if you don''t take into account
these informations.
>
>
>
>
>
>
>
>
>
>________________________________
> De : Teo En Ming (Zhang Enming) <singapore.mr.teo.en.ming@gmail.com>
>À : David TECHER <davidtecher@yahoo.fr> 
>Cc : "xen-users@lists.xen.org" <xen-users@lists.xen.org>;
Casey DeLorme <cdelorme@gmail.com>; Teo En Ming (Zhang Enming)
<singapore.mr.teo.en.ming@gmail.com>
>Envoyé le : Mercredi 21 mars 2012 12h36
>Objet : Re: [Xen-users] Re : Re : Re : Re : Xen VGA Passthrough Questions
> 
>
>Dear David Techer,
>
>Thank you for your reply.
>
>I am already using Linux Kernel 3.3.0 final.
>
>I will be making changes to my compilation steps for Xen
                4.2-unstable changeset 25070.>
>Let''s see how.
>
>Yours sincerely,
>
>Teo En Ming (Zhang Enming)
>
>On 21/03/2012 19:09, David TECHER wrote: 
>My domU Windows XP works perfectly with changeset 25070
>>
>>Did you read http://wiki.xen.org/wiki/Xen_VGA_Passthrough carefully?
>>
>>As noticed in your document I am not used to compil
                    my kernel using >> 
>>
>>
>>make world
>>
>>
>>I''ve got a doubt about building your kernel this way, your
kernel will have all required support for VGA PassThrough
>>
>>
>>I''m used to compil from 3.1.10
>>
>>
>>
>>Extract from documentation on Wiki
>>
>>
>>
>>=========>>
>>Xen VGA passthru requirements from dom0 kernel 
>>Make sure your dom0 Linux kernel has
"CONFIG_XEN_PCIDEV_BACKEND_PASS" option enabled.
"CONFIG_XEN_PCIDEV_BACKEND_VPCI" should be disabled. For example
Debian Squeeze 2.6.32 kernel has the wrong PCIDEV_BACKEND mode as a default.. so
in that case you might need to recompile the kernel with custom .config to get
the right backend mode in use. BACKEND_PASS mode means the PCI IDs of the PCI
device (graphics card) will be the same in the VM as in dom0/host.
>>==============>>
>>
>>
>>So you need to download kernel 3.3 sources and compil it properly.
>>
>>
>>Tonight (EST Time so in more than 8 hours ) I will have a try for kernel
3.3 and see if I have the same error an will let you know.
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>________________________________
>> De : Teo En Ming (Zhang Enming)
<singapore.mr.teo.en.ming@gmail.com>
>>À : David TECHER <davidtecher@yahoo.fr> 
>>Cc : Casey DeLorme <cdelorme@gmail.com>;
"xen-users@lists.xen.org" <xen-users@lists.xen.org>; Teo En Ming
(Zhang Enming) <singapore.mr.teo.en.ming@gmail.com>
>>Envoyé le : Mercredi 21 mars 2012 11h02
>>Objet : Re: Re : [Xen-users] Re : Re : Xen VGA Passthrough Questions
>> 
>>
>>Dear David Techer,
>>
>>Thank you for your reply.
>>
>>I am using Windows XP / Windows 8 Consumer                            Preview HVM domU and not Linux HVM
domU.>>
>>Please read my Xen VGA Passthrough - Version                            1.0.PDF and see whether I am missing out or
                            making any wrong steps.>>
>>Yours sincerely,
>>
>>Teo En Ming (Zhang Enming)
>>
>>On 21/03/2012 17:25, David TECHER wrote: 
>>You need to add nouveau.blacklist=1 in the grub.cfg of your domU
>>>
>>>Have access to partition table of your
                                domU using kpartx>>>
>>>kpart -va /dev/path/to/your/LVM/domU
>>>
>>>mount /dev/mapper/.../....      
                                /path/where/to/mount>>>
>>>vim                               
//path/where/to/mount/boot/grub/grub.cfg>>>
>>>add nouveau.blacklist=1 to the module
                                line.>>>
>>>Umount /path/where/to/mount
>>>
>>>kpart -vd /dev/path/to/your/LVM/domU
>>>
>>>boot your domU
>>>
>>>Install NVIDIA driver.
>>>
>>>
>>>
>>>
>>>
>>>
>>>________________________________
>>> De : Teo En Ming (Zhang Enming)
<singapore.mr.teo.en.ming@gmail.com>
>>>À : Casey DeLorme <cdelorme@gmail.com> 
>>>Cc : David TECHER <davidtecher@yahoo.fr>;
"xen-users@lists.xen.org" <xen-users@lists.xen.org>; Teo En Ming
(Zhang Enming) <singapore.mr.teo.en.ming@gmail.com>
>>>Envoyé le : Mercredi 21 mars 2012 5h06
>>>Objet : Re: [Xen-users] Re : Re : Xen VGA Passthrough Questions
>>> 
>>>
>>>Hi,
>>>
>>>How do I stop lightdm display                                        manager and X.org server in
                                        Ubuntu 11.10 and unload the
                                        nouveau vga
driver?>>>
>>>I can run "sudo killall lightdm"                                        and lightdm and X.org X server
                                        will be terminated successfully,
                                        but I cannot force nouveau to
                                        unload at all. It always say
                                        nouveau module is in use even if
                                        I use "sudo modprobe --force
                                        --remove
nouveau".>>>
>>>I need to unload the following                                        kernel modules for successful
                                        Xen VGA
passthrough.>>>
>>>rmmod nouveau rmmod ttm rmmod drm_kms_helper rmmod drm Please read
Deactivating KMS and unloading Nouveau at
http://nouveau.freedesktop.org/wiki/KernelModeSetting
>>>But setting "echo 0 > /sys/class/vtconsole/vtcon1/bind"
causes the display to hang and I can''t do anything more at all.
>>>
>>>I can''t force nouveau,ttm,drm_kms_helper,drm kernel modules
to unload. Help!!! Also, if I add xen-pciback.hide=(01:00.0) to the module line
in GRUB2, the display turns blank while booting and I can''t do anything
at all. Any ideas? Thank you very much. Yours sincerely, Teo En Ming (Zhang
Enming)
>>>On 21/03/2012 00:36, Casey
                                        DeLorme wrote: >>>Hello,
>>>>
>>>>
>>>>Supposedly both the board & CPU must have VT-d, the E6300
does not:
>>>>http://ark.intel.com/products/41493/Intel-Pentium-Processor-E6300-(2M-Cache-2_80-GHz-1066-MHz-FSB)
>>>>
>>>>
>>>>If pciback was compiled into your kernel (not a module) then you
can add "xen-pciback.hide=(01:00.0)" to the module line in your
grub.cfg, substituting your lspci device names.
>>>>
>>>>
>>>>nVidia supposedly requires patches and only works in Windows XP,
there are a few Windows 7 success stories, but they seem rare.  Most people have
success without patches using AMD cards.
>>>>
>>>>
>>>>Best of luck.
>>>>
>>>>
>>>>~Casey DeLorme
>>>>
>>>>
>>>>
>>>>
>>>>On Tue, Mar 20, 2012 at 11:39 AM, Teo En Ming (Zhang Enming)
<singapore.mr.teo.en.ming@gmail.com> wrote:
>>>>
>>>>Dear David Techer and others,
>>>>>
>>>>>I thought Intel H61                                                  chipset and MSI
                                                  motherboards
                                                  officially don''t
                                                  support VT-x and VT-d?
                                                  There is no VT-d
                                                  enabling option in MSI
                                                  motherboard
BIOS.>>>>>
>>>>>I want to test Xen VGA                                                  passthrough for
                                                  Windows 8 Consumer
                                                  Preview 64-bit English
                                                  HVM domU with my Intel
                                                  DQ45CB motherboard and
                                                  Intel Pentium Dual
                                                  Core E6300 2800
MHz.>>>>>
>>>>>By the way, I am using                                                  Linux kernel 3.3.0
                                                  Final. Should I use
                                                  PCIBACK or PCI-STUB?
                                                  If I use pciback, what
                                                  arguments should I
                                                  parse to the kernel
                                                  command line in GRUB2?
                                                  Please point me to the
                                                  documentation for
                                                  kernel command line
                                                  arguments in the linux
                                                  kernel source
tree.>>>>>
>>>>>My graphics card:                                                  Palit NVIDIA Geforce
                                                  8400 GS PCI Express
                                                  x16 SGD$44
>>>>>
>>>>>
>>>>>Thank you very much.
>>>>>
>>>>>Yours sincerely,
>>>>>
>>>>>Teo En Ming (Zhang                                                   
Enming)>>>>>
>>>>>
>>>>>
>>>>>On 20/03/2012 23:17, David TECHER wrote: 
>>>>>You''re welcome.
>>>>>>
>>>>>>
>>>>>>Keep in mind that if you are going to upgrade BIOS for
your motherboard, those values for your card may changed.
>>>>>>
>>>>>>
>>>>>>I was in this situation last time  BIOS was upgraded.
>>>>>>
>>>>>>
>>>>>>It does mean that those values will changed each time
you upgrade your motherboad BIOS but having thos values changed after a BIOS
upgrade could occur for a specific upgrade.
>>>>>>
>>>>>>
>>>>>>Don''t ask me why...I do not know.
>>>>>>
>>>>>>
>>>>>>So you will be well advised to heck those values for
each BIOS upgrade.
>>>>>>
>>>>>>
>>>>>>Moreover don''t waste your time to test VGA
PassThrough for NVIDIA for Windows  7. For Windows 7 use ATI.
>>>>>>
>>>>>>
>>>>>>
>>>>>>I did my tests for playing with wine 1.4/1.5 on domU
Ubuntu Lucid 10.04.4 PV HVM (game like Crysis 2) and it rocks :)
>>>>>>
>>>>>>
>>>>>>
>>>>>>My configuration:
>>>>>>
>>>>>>
>>>>>>Manufacturer: MSI / Product Name: H61MU-E35 (MS-7680) 
>>>>>>
>>>>>>Bios version: V10.11
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>________________________________
>>>>>> De : Teo En Ming (Zhang Enming)
<singapore.mr.teo.en.ming@gmail.com>
>>>>>>À : David TECHER <davidtecher@yahoo.fr> 
>>>>>>Cc : "xen-users@lists.xen.org"
<xen-users@lists.xen.org>; Teo En Ming (Zhang Enming)
<singapore.mr.teo.en.ming@gmail.com>
>>>>>>Envoyé le : Mardi 20 mars 2012 16h02
>>>>>>Objet : Re: Re : Xen VGA Passthrough Questions
>>>>>> 
>>>>>>
>>>>>>Dear David Techer,
>>>>>>
>>>>>>Thank you.
>>>>>>
>>>>>>I think the                                                          following
                                                          command is
                                                         
sufficient.>>>>>>
>>>>>>dmesg | grep                                                          01:00.0 | grep
                                                         
"pci.*mem">>>>>>
>>>>>>Yours                                                         
sincerely,>>>>>>
>>>>>>Teo En Ming                                                          (Zhang
Enming)>>>>>>
>>>>>>On 20/03/2012                                                          17:54, David
                                                          TECHER wrote:
>>>>>>Hi Teo,
>>>>>>>
>>>>>>>
>>>>>>>The 3 first lines with pattern
''pci.*mem'' need to be returned
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>U need to use somethign like 
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>root@gemini:~# lspci |grep VGA
>>>>>>>02:00.0 VGA                                                          compatible
                                                          controller:
                                                          nVidia
                                                          Corporation
                                                          Device 0ca2
                                                          (rev
a2)>>>>>>>root@gemini:~#                                                          dmesg|grep
                                                          02:00.0 |grep
                                                          '' pci
                                                         
[0-9].*mem''|head
                                                         
-n3>>>>>>>[    0.174458]                                                          pci
                                                          0000:02:00.0:
                                                          reg 10: [mem
                                                         
0xfb000000-0xfbffffff]>>>>>>>[    0.174466]                                                          pci
                                                          0000:02:00.0:
                                                          reg 14: [mem
                                                          0xd0000000-0xdfffffff
                                                          64bit
pref]>>>>>>>[    0.174475]                                                          pci
                                                          0000:02:00.0:
                                                          reg 1c: [mem
                                                          0xee000000-0xefffffff
                                                          64bit
pref]>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>Kind regards
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>________________________________
>>>>>>> De : Teo En Ming (Zhang Enming)
<singapore.mr.teo.en.ming@gmail.com>
>>>>>>>À : "xen-users@lists.xen.org"
<xen-users@lists.xen.org>; David TECHER <davidtecher@yahoo.fr>; Teo
En Ming (Zhang Enming) <singapore.mr.teo.en.ming@gmail.com>
>>>>>>>Envoyé le : Mardi 20 mars 2012 8h39
>>>>>>>Objet : Xen VGA Passthrough Questions
>>>>>>> 
>>>>>>>Dear David                                                         
Techer,>>>>>>>
>>>>>>>I have read                                                          through your
                                                          article on Xen
                                                          VGA
                                                          passthrough on
http://www.davidgis.fr.>>>>>>>
>>>>>>>It appears                                                          that the
                                                          following
                                                          command on
                                                          your blog
                                                          doesn''t
work.>>>>>>>
>>>>>>>dmesg | grep                                                          01:00.0 | grep
                                                         
BAR>>>>>>>
>>>>>>>The above                                                          command shows
                                                          nothing at
                                                          all. Is there
                                                          an alternative
                                                         
solution?>>>>>>>
>>>>>>>Thank you very                                                         
much.>>>>>>>
>>>>>>>Yours                                                         
sincerely,>>>>>>>
>>>>>>>Teo En Ming                                                          (Zhang
Enming)>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>>_______________________________________________
>>>>>Xen-users mailing list
>>>>>Xen-users@lists.xen.org
>>>>>http://lists.xen.org/xen-users
>>>>>
>>>>
>>>
>>>
>>>
>>
>>
>>
>
>_______________________________________________
>Xen-users mailing list
>Xen-users@lists.xen.org
>http://lists.xen.org/xen-users
>
>
_______________________________________________
Xen-users mailing list
Xen-users@lists.xen.org
http://lists.xen.org/xen-users

Reasonably Related Threads

Search for more seemingly similar threads

Xen users - Mar 2012 - Xen VGA Passthrough Questions

Xen VGA Passthrough Questions

Re : Xen VGA Passthrough Questions

Re: Re : Xen VGA Passthrough Questions

Re : Re : Xen VGA Passthrough Questions

Re: Re : Re : Xen VGA Passthrough Questions

Re: Re : Re : Xen VGA Passthrough Questions

Re: Re : Re : Xen VGA Passthrough Questions

How to Stop lightdm Display Manager and X.org X Server in UBUNTU 11.10 and Unload nouveau Kernel Module? (Xen VGA Passthrough)

Re : Re : Re : Xen VGA Passthrough Questions

Re : Re : Re : Xen VGA Passthrough Questions

Re: Re : Re : Re : Xen VGA Passthrough Questions

Re : Re : Re : Re : Xen VGA Passthrough Questions

Re: Re : Re : Re : Re : Xen VGA Passthrough Questions

Re : Re : Re : Re : Re : Xen VGA Passthrough Questions

Re: Re : Re : Re : Re : Re : Xen VGA Passthrough Questions

Re : Re : Re : Re : Re : Re : Xen VGA Passthrough Questions

Reasonably Related Threads