thr3ads.net - samba - [Samba] Can see server, but can't see shares. Whazzup? [May 2004]

If this information is useful, please help other people find it:
Share via:

Matthew Thurmaier

2004-May-17 19:44 UTC

[Samba] Can see server, but can't see shares. Whazzup?

Hi,

I have configure Samba 2.2.7-5.8.0  on my RH 8 box. The smb.conf file
is attached below.  From my WinXP box, I see the box in my network
neighborhood. But, when I try to "open" / browse the server from said
box (on the 192.168.0 network),  I get the message:
    \\World2 is not accessible. You might not have permission to use 
this network
    resource. Contact the administrator of this server to find out if 
you have
    access permissions.

     The network path was not found.

Of course, it takes 20-30 seconds for it to figure this out.  However, from
the Samba server itself, I can use "smbclient '\\world2i\homes' -U
matt"
and,
after authentication, all is cool. But, I never even get a chance to 
authenticate
from the XP box.  I've google searched. i've FAQ read, and either I
skipped
over it or I'm missing something.

Any help is greatly appreciated.

Cheers,
Matthew

smb.conf file------------------------------------------------------------
[global]
        log file = /var/log/samba/%m.log
        smb passwd file = /etc/samba/smbpasswd
        load printers = yes
        passwd chat = *New*password* %n\n *Retype*new*password* %n\n 
*passwd:*a
ll*authentication*tokens*updated*successfully*
        socket options = TCP_NODELAY SO_SNDBUF=8192 SO_RCVBUF=8192
        obey pam restrictions = yes
        encrypt passwords = yes
        passwd program = /usr/bin/passwd %u
        dns proxy = no
        netbios name = world2i
        server string = world2i
        printing = lprng
        default = global
        unix password sync = Yes
        preferred master = no
        workgroup = TCCIHQ
        os level = 20
        socket address = 192.168.0.202
        printcap name = /etc/printcap
        security = user
        max log size = 0
        pam password change = yes
        local master=no
        hosts allow = 127.0.0.1/255.255.255.255 192.168.0.0/255.255.255.0
        interfaces = 127.0.0.1 eth0*

[homes]
        writable = yes
        path = /home
        comment = Home Directories
        valid users = %S
        create mode = 0664
        directory mode = 0775

[printers]
   comment = All Printers
   path = /var/spool/samba
   browseable = no
# Set public = yes to allow user 'guest account' to print
   guest ok = no
   writable = no
   printable = yes

[slash]
        browseable = no
        path = /


--------------------------
The rest of the file is commented out.




    

-- 
****************************************************************
*      Those who desire to give up freedom in order to gain    *
*    security will not have, nor do they deserve, either one.  *
*                   - President Thomas Jefferson               *
****************************************************************
* Matthew Thurmaier, President *   matt@compclass.com          *
* The Computer Classroom, Inc. *   http://www.compclass.com    *
* Company HQ/(800) 603-8988    *   Me Direct/(386)426-7828     *
****************************************************************


-------------- next part --------------
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options (perhaps too
# many!) most of which are not shown in this example
#
# Any line which starts with a ; (semi-colon) or a # (hash) 
# is a comment and is ignored. In this example we will use a #
# for commentry and a ; for parts of the config file that you
# may wish to enable
#
# NOTE: Whenever you modify this file you should run the command
"testparm"
# to check that you have not made any basic syntactic errors. 
#
#======================= Global Settings
====================================[global]
	log file = /var/log/samba/%m.log
	smb passwd file = /etc/samba/smbpasswd
	load printers = yes
	passwd chat = *New*password* %n\n *Retype*new*password* %n\n
*passwd:*all*authentication*tokens*updated*successfully*
	socket options = TCP_NODELAY SO_SNDBUF=8192 SO_RCVBUF=8192
	obey pam restrictions = yes
	encrypt passwords = yes
	passwd program = /usr/bin/passwd %u
	dns proxy = no 
	netbios name = world2i
	server string = world2i
	printing = lprng
	default = global
	unix password sync = Yes
        preferred master = no
	workgroup = TCCIHQ
	os level = 20
	socket address = 192.168.0.202
	printcap name = /etc/printcap
	security = user
	max log size = 0
	pam password change = yes
        local master=no
        hosts allow = 127.0.0.1/255.255.255.255 192.168.0.0/255.255.255.0
        interfaces = 127.0.0.1 eth0*

[homes]
	writable = yes
	path = /home
	comment = Home Directories
	valid users = %S
	create mode = 0664
	directory mode = 0775

[printers]
   comment = All Printers
   path = /var/spool/samba
   browseable = no
# Set public = yes to allow user 'guest account' to print
   guest ok = no
   writable = no
   printable = yes

# This one is useful for people to share files
;[tmp]
;   comment = Temporary file space
;   path = /tmp
;   read only = no
;   public = yes

# A publicly accessible directory, but read only, except for people in
# the "staff" group
;[public]
;   comment = Public Stuff
;   path = /home/samba
;   public = yes
;   writable = yes
;   printable = no
;   write list = @staff

# Other examples. 
#
# A private printer, usable only by fred. Spool data will be placed in
fred's
# home directory. Note that fred must have write access to the spool directory,
# wherever it is.
;[fredsprn]
;   comment = Fred's Printer
;   valid users = fred
;   path = /home/fred
;   printer = freds_printer
;   public = no
;   writable = no
;   printable = yes

# A private directory, usable only by fred. Note that fred requires write
# access to the directory.
;[fredsdir]
;   comment = Fred's Service
;   path = /usr/somewhere/private
;   valid users = fred
;   public = no
;   writable = yes
;   printable = no

# a service which has a different directory for each machine that connects
# this allows you to tailor configurations to incoming machines. You could
# also use the %U option to tailor it by user name.
# The %m gets replaced with the machine name that is connecting.
;[pchome]
;  comment = PC Directories
;  path = /usr/local/pc/%m
;  public = no
;  writable = yes

# A publicly accessible directory, read/write to all users. Note that all files
# created in the directory by users will be owned by the default user, so
# any user with access can delete any other user's files. Obviously this
# directory must be writable by the default user. Another user could of course
# be specified, in which case all files would be owned by that user instead.
;[public]
;   path = /usr/somewhere/else/public
;   public = yes
;   only guest = yes
;   writable = yes
;   printable = no

# The following two entries demonstrate how to share a directory so that two
# users can place files there that will be owned by the specific users. In this
# setup, the directory should be writable by both users and should have the
# sticky bit set on it to prevent abuse. Obviously this could be extended to
# as many users as required.
;[myshare]
;   comment = Mary's and Fred's stuff
;   path = /usr/somewhere/shared
;   valid users = mary fred
;   public = no
;   writable = yes
;   printable = no
;   create mask = 0765

[slash]
	browseable = no
	path = /

antonio@kabaya.homelinux.org

2004-May-17 20:48 UTC

head link

[Samba] Can see server, but can't see shares. Whazzup?

Try to login in xp with a user account + passwd the same that in
smbpasswd; #smbpasswd -a user

I think you have an anonymous account in your winxp.
That prob reminds me the situation in w98 when an user cancel the net
passwd at the start.


Regards
> Hi,
>
> I have configure Samba 2.2.7-5.8.0  on my RH 8 box. The smb.conf file
> is attached below.  From my WinXP box, I see the box in my network
> neighborhood. But, when I try to "open" / browse the server from
said
> box (on the 192.168.0 network),  I get the message:
>     \\World2 is not accessible. You might not have permission to use
> this network
>     resource. Contact the administrator of this server to find out if
> you have
>     access permissions.
>
>      The network path was not found.
>
> Of course, it takes 20-30 seconds for it to figure this out.  However,
> from
> the Samba server itself, I can use "smbclient
'\\world2i\homes' -U matt"
> and,
> after authentication, all is cool. But, I never even get a chance to
> authenticate
> from the XP box.  I've google searched. i've FAQ read, and either I
> skipped
> over it or I'm missing something.
>
> Any help is greatly appreciated.
>
> Cheers,
> Matthew
>
> smb.conf file------------------------------------------------------------
> [global]
>         log file = /var/log/samba/%m.log
>         smb passwd file = /etc/samba/smbpasswd
>         load printers = yes
>         passwd chat = *New*password* %n\n *Retype*new*password* %n\n
> *passwd:*a
> ll*authentication*tokens*updated*successfully*
>         socket options = TCP_NODELAY SO_SNDBUF=8192 SO_RCVBUF=8192
>         obey pam restrictions = yes
>         encrypt passwords = yes
>         passwd program = /usr/bin/passwd %u
>         dns proxy = no
>         netbios name = world2i
>         server string = world2i
>         printing = lprng
>         default = global
>         unix password sync = Yes
>         preferred master = no
>         workgroup = TCCIHQ
>         os level = 20
>         socket address = 192.168.0.202
>         printcap name = /etc/printcap
>         security = user
>         max log size = 0
>         pam password change = yes
>         local master=no
>         hosts allow = 127.0.0.1/255.255.255.255 192.168.0.0/255.255.255.0
>         interfaces = 127.0.0.1 eth0*
>
> [homes]
>         writable = yes
>         path = /home
>         comment = Home Directories
>         valid users = %S
>         create mode = 0664
>         directory mode = 0775
>
> [printers]
>    comment = All Printers
>    path = /var/spool/samba
>    browseable = no
> # Set public = yes to allow user 'guest account' to print
>    guest ok = no
>    writable = no
>    printable = yes
>
> [slash]
>         browseable = no
>         path = /
>
>
> --------------------------
> The rest of the file is commented out.
>
>
>
>
>
>
> --
> ****************************************************************
> *      Those who desire to give up freedom in order to gain    *
> *    security will not have, nor do they deserve, either one.  *
> *                   - President Thomas Jefferson               *
> ****************************************************************
> * Matthew Thurmaier, President *   matt@compclass.com          *
> * The Computer Classroom, Inc. *   http://www.compclass.com    *
> * Company HQ/(800) 603-8988    *   Me Direct/(386)426-7828     *
> ****************************************************************
> 
>
> --
> To unsubscribe from this list go to the following URL and read the
> instructions:  http://lists.samba.org/mailman/listinfo/samba

Vit

2004-May-18 13:46 UTC

head link

[Samba] Can see server, but can't see shares. Whazzup?

did you add your username to samba with smbpasswd -a username.
also do you have necessary ports open?

Vit

2004-May-18 13:50 UTC

head link

[Samba] Can see server, but can't see shares. Whazzup?

i reread ur message and it seems like you dont have necessary ports open, try
running redhat-config-securitylevel
and temporary disable the firewall. if this will help then work with ur iptables
to open port 139

Reasonably Related Threads

Search for more reasonably related threads

samba - May 2004 - Can see server, but can't see shares. Whazzup?

[Samba] Can see server, but can't see shares. Whazzup?

[Samba] Can see server, but can't see shares. Whazzup?

[Samba] Can see server, but can't see shares. Whazzup?

[Samba] Can see server, but can't see shares. Whazzup?

Reasonably Related Threads