Samba mount (from one of our build scripts). We decided to upgrade to RedHat
7.2 (which uses a newer version of Samba -- 2.1.1b IIRC), maybe that fixes
the problem. However, I decided to submit this bug report, in the hope that
it may help kill some bugs. (Remember -- the only good bug, is a dead bug
:))
So, here is the dmesg output:
Linux version 2.2.16-22enterprise (root@porky.devel.redhat.com) (gcc version
egcs-2.91.66 19990314/Linux (egcs-1.1.2 release)) #1 SMP Tue Aug 22 16:29:32
EDT 2000
Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
OEM ID: DELL Product ID: POWEREDGE D1 APIC at: 0xFEE00000
Processor #0 Pentium(tm) Pro APIC version 17
I/O APIC #1 Version 17 at 0xFEC00000.
I/O APIC #2 Version 17 at 0xFEC01000.
Processors: 1
mapped APIC to ffffe000 (fee00000)
mapped IOAPIC to ffffd000 (fec00000)
mapped IOAPIC to ffffc000 (fec01000)
relocating initrd image:
initrd_start:0xc0f8b000 initrd_end:0xc0fff7dc
mem_start:0xc02a5000 mem_end:0xcfff0000
initrd_size:0x000747dc dest:0xcff7b000
Detected 927172 kHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 1848.12 BogoMIPS
Memory: 256916k/262080k available (1120k kernel code, 420k reserved, 3080k
data, 76k init, 0k bigmem)
Dentry hash table entries: 262144 (order 9, 2048k)
Buffer cache hash table entries: 262144 (order 8, 1024k)
Page cache hash table entries: 65536 (order 6, 256k)
VFS: Diskquotas version dquot_6.4.0 initialized
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.35a (19990819) Richard Gooch (rgooch@atnf.csiro.au)
per-CPU timeslice cutoff: 49.98 usecs.
CPU0: Intel Pentium III (Coppermine) stepping 06
calibrating APIC timer ...
..... CPU clock speed is 927.1691 MHz.
..... system bus clock speed is 132.4526 MHz.
Error: only one processor found.
enabling symmetric IO mode... ...done.
ENABLING IO-APIC IRQs
...changing IO-APIC physical APIC ID to 1
...changing IO-APIC physical APIC ID to 2
init IO_APIC IRQs
IO-APIC (apicid-pin) 1-0, 1-2, 1-5, 1-10, 1-13, 2-10, 2-11, 2-12,
2-13WARNING: ASSIGN_IRQ_VECTOR wrapped back to 52
not connected.
...trying to set up timer as ExtINT... .. (found pin 0) ... works.
number of MP IRQ sources: 30.
number of IO-APIC #1 registers: 16.
number of IO-APIC #2 registers: 16.
testing the IO APIC.......................
IO APIC #1......
.... register #00: 01000000
....... : physical APIC id: 01
.... register #01: 000F0011
....... : max redirection entries: 000F
....... : IO APIC version: 0011
.... register #02: 00000000
....... : arbitration: 00
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 0 0 0 0 0 0 7 51
01 000 00 0 0 0 0 0 1 1 59
02 000 00 1 0 0 0 0 0 0 00
03 000 00 0 0 0 0 0 1 1 61
04 000 00 0 0 0 0 0 1 1 69
05 000 00 1 0 0 0 0 0 0 00
06 000 00 0 0 0 0 0 1 1 71
07 000 00 0 0 0 0 0 1 1 79
08 000 00 0 0 0 0 0 1 1 81
09 000 00 0 0 0 0 0 1 1 89
0a 000 00 1 0 0 0 0 0 0 00
0b 0FF 0F 1 1 0 1 0 1 1 91
0c 000 00 0 0 0 0 0 1 1 99
0d 000 00 1 0 0 0 0 0 0 00
0e 000 00 0 0 0 0 0 1 1 A1
0f 000 00 0 0 0 0 0 1 1 A9
IO APIC #2......
.... register #00: 02000000
....... : physical APIC id: 02
.... register #01: 000F0011
....... : max redirection entries: 000F
....... : IO APIC version: 0011
.... register #02: 0D000000
....... : arbitration: 0D
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 0FF 0F 1 1 0 1 0 1 1 B1
01 0FF 0F 1 1 0 1 0 1 1 B9
02 0FF 0F 1 1 0 1 0 1 1 C1
03 0FF 0F 1 1 0 1 0 1 1 C9
04 0FF 0F 1 1 0 1 0 1 1 D1
05 0FF 0F 1 1 0 1 0 1 1 D9
06 0FF 0F 1 1 0 1 0 1 1 E1
07 0FF 0F 1 1 0 1 0 1 1 E9
08 0FF 0F 1 1 0 1 0 1 1 F1
09 0FF 0F 1 1 0 1 0 1 1 F9
0a 000 00 1 0 0 0 0 0 0 00
0b 000 00 1 0 0 0 0 0 0 00
0c 000 00 1 0 0 0 0 0 0 00
0d 000 00 1 0 0 0 0 0 0 00
0e 0FF 0F 1 1 0 1 0 1 1 52
0f 0FF 0F 1 1 0 1 0 1 1 5A
IRQ to pin mappings:
IRQ1 -> 1
IRQ3 -> 3
IRQ4 -> 4
IRQ6 -> 6
IRQ7 -> 7
IRQ8 -> 8
IRQ9 -> 9
IRQ11 -> 11
IRQ12 -> 12
IRQ14 -> 14
IRQ15 -> 15
IRQ16 -> 0
IRQ17 -> 1
IRQ18 -> 2
IRQ19 -> 3
IRQ20 -> 4
IRQ21 -> 5
IRQ22 -> 6
IRQ23 -> 7
IRQ24 -> 8
IRQ25 -> 9
IRQ30 -> 14
IRQ31 -> 15
.................................... done.
PCI: PCI BIOS revision 2.10 entry at 0xfc77e
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: 00:00 [1166/0008]: Scanning peer host bridges
PCI: Scanning ServerWorks HE/LE Peer Bus Bridge 00/00
PCI: 00:01 [1166/0008]: Scanning peer host bridges
PCI: Scanning ServerWorks HE/LE Peer Bus Bridge 00/01
PCI->APIC IRQ transform: (B1,I8,P0) -> 17
PCI->APIC IRQ transform: (B2,I4,P0) -> 16
PCI->APIC IRQ transform: (B3,I4,P0) -> 31
PCI->APIC IRQ transform: (B3,I4,P1) -> 30
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
TCP: Hash tables configured (ehash 262144 bhash 65536)
Linux IP multicast router 0.06 plus PIM-SM
Initializing RT netlink socket
Starting kswapd v 1.5
Detected PS/2 Mouse Port.
Serial driver version 4.27 with MANY_PORTS MULTIPORT SHARE_IRQ enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
pty: 256 Unix98 ptys configured
apm: BIOS not found.
Real Time Clock Driver v1.09
RAM disk driver initialized: 16 RAM disks of 4096K size
PCI_IDE: unknown IDE controller on PCI bus 00 device 79, VID=1166, DID=0211
PCI_IDE: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x08b0-0x08b7, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x08b8-0x08bf, BIOS settings: hdc:pio, hdd:pio
hda: SAMSUNG CD-ROM SN-124, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
md driver 0.90.0 MAX_MD_DEVS=256, MAX_REAL=12
raid5: measuring checksumming speed
raid5: MMX detected, trying high-speed MMX checksum routines
pII_mmx : 2076.450 MB/sec
p5_mmx : 2168.271 MB/sec
8regs : 1591.818 MB/sec
32regs : 935.736 MB/sec
using fastest function: p5_mmx (2168.271 MB/sec)
scsi : 0 hosts.
scsi : detected total.
md.c: sizeof(mdp_super_t) = 4096
Partition check:
RAMDISK: Compressed image found at block 0
autodetecting RAID arrays
autorun ...
... autorun DONE.
EXT2-fs warning: checktime reached, running e2fsck is recommended
VFS: Mounted root (ext2 filesystem).
(scsi0) <Adaptec AIC-7899 Ultra 160/m SCSI host adapter> found at PCI
3/4/0
(scsi0) Wide Channel A, SCSI ID=7, 32/255 SCBs
(scsi0) Downloading sequencer code... 392 instructions downloaded
(scsi1) <Adaptec AIC-7899 Ultra 160/m SCSI host adapter> found at PCI
3/4/1
(scsi1) Wide Channel B, SCSI ID=7, 32/255 SCBs
(scsi1) Downloading sequencer code... 392 instructions downloaded
scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.1.31/3.2.4
<Adaptec AIC-7899 Ultra 160/m SCSI host adapter>
scsi1 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.1.31/3.2.4
<Adaptec AIC-7899 Ultra 160/m SCSI host adapter>
scsi : 2 hosts.
(scsi0:0:0:0) Synchronous at 160.0 Mbyte/sec, offset 63.
Vendor: SEAGATE Model: ST336704LC Rev: 0004
Type: Direct-Access ANSI SCSI revision: 03
Detected scsi disk sda at scsi0, channel 0, id 0, lun 0
Vendor: Model: 1x4 U2W SCSI BP Rev: 1.24
Type: Processor ANSI SCSI revision: 02
SCSI device sda: hdwr sector= 512 bytes. Sectors= 71132960 [34732 MB] [34.7
GB]
sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 >
autodetecting RAID arrays
autorun ...
... autorun DONE.
VFS: Mounted root (ext2 filesystem) readonly.
change_root: old root has d_count=1
Trying to unmount old root ... okay
Freeing unused kernel memory: 76k freed
Adding Swap: 530104k swap-space (priority -1)
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-ohci.c: USB OHCI at membase 0xd0089000, IRQ 11
usb.c: new USB bus registered, assigned bus number 1
usb.c: USB new device connect, assigned device number 1
hub.c: USB hub found
hub.c: 2 ports detected
Intel(R) PRO/100 Fast Ethernet Adapter - Loadable driver, ver. 1.2.1
Copyright (c) 2000 Intel Corporation
e100 - Intel(R) 8255x-based Ethernet
eth0: Mem:0xfe900000 IRQ:16 Speed:100 Mbps Dx:Full
Hardware receive checksums enabled
smb_trans2_request: result=-32, setting invalid
smb_lookup: find //My Documents failed, error=-5
smb_lookup: find //My Documents failed, error=-5
smb_lookup: find //My Documents failed, error=-5
smb_lookup: find //My Documents failed, error=-5
smb_lookup: find //My Documents failed, error=-5
smb_lookup: find //My Documents failed, error=-5
smb_lookup: find //My Documents failed, error=-5
smb_lookup: find //My Documents failed, error=-5
smb_lookup: find //My Documents failed, error=-5
smb_lookup: find //My Documents failed, error=-5
smb_lookup: find //My Documents failed, error=-5
smb_lookup: find //My Documents failed, error=-5
smb_lookup: find //My Documents failed, error=-5
smb_lookup: find //My Documents failed, error=-5
smb_lookup: find //My Documents failed, error=-5
smb_trans2_request: result=-32, setting invalid
smb_lookup: find //My Documents failed, error=-5
smb_lookup: find //My Documents failed, error=-5
smb_trans2_request: result=-32, setting invalid
smb_lookup: find //My Documents failed, error=-5
smb_lookup: find //My Documents failed, error=-5
smb_lookup: find //My Documents failed, error=-5
smb_trans2_request: result=-32, setting invalid
smb_lookup: find //My Documents failed, error=-5
smb_lookup: find //My Documents failed, error=-5
smb_lookup: find //My Documents failed, error=-5
smb_lookup: find //pagefile.sys failed, error=-26
smb_request: result -32, setting invalid
smb_lookup: find //My Documents failed, error=-5
smb_lookup: find //My Documents failed, error=-5
Let me know if I can supply any more information.
TIA,
Dimi.
