search for: scsi1

...ng to do with me attaching the disk incorrectly, and when I'm looking at the VMWare config one thing I noticed was the SCSI mode "independent-persistent" which I cannot find in libvirt documentation by quick look. Would anyone know how to achieve this? In the VMWare VMX file I have: scsi1:4.present = "TRUE" scsi1:4.fileName = "SCSI1.vmdk" scsi1:4.mode = "independent-persistent" scsi1:4.deviceType = "scsi-hardDisk" and I attempted the below configuration, but when I tried to use the disk as a IO Fencing disk for veritas cluster file system, it...

...o set up my first tape loader, a Quantum SuperLoader 3. My "cat /proc/scsi/scsi" outputs the following: Attached devices: Host: scsi0 Channel: 00 Id: 00 Lun: 00 Vendor: transtec Model: PV610F16R1C Rev: 373I Type: Direct-Access ANSI SCSI revision: 05 Host: scsi1 Channel: 00 Id: 01 Lun: 00 Vendor: HP Model: Ultrium 3-SCSI Rev: D22D Type: Sequential-Access ANSI SCSI revision: 03 Host: scsi1 Channel: 00 Id: 05 Lun: 00 Vendor: HP Model: Ultrium 4-SCSI Rev: B54Z Type: Sequential-Access ANSI SCSI revi...

...YS drives (500GB) hooked to it, running as a single RAID6 w/ a hot spare. These issues boil down to the card periodically throwing errors like the following: sd 1:0:0:0: WARNING: (0x06:0x002C): Command (0x8a) timed out, resetting card. Usually when this happens, it's followed by: 3w-9xxx: scsi1: AEN: INFO (0x04:0x005E): Cache synchronization completed:unit=0. On the less pleasant occasions, it's followed by: scsi1: ERROR: (0x06:0x0036): Response queue (large) empty failed during reset sequence. 3w-9xxx: scsi1: ERROR: (0x06:0x002B): Controller reset failed during scsi host reset....

...SCSI adapters: [oracle at sibrsdbs oracle]$ dmesg | grep -i scsi SCSI subsystem driver Revision: 1.00 (scsi0) <Adaptec AIC-7899 Ultra 160/m SCSI host adapter> found at PCI 0/5/0 (scsi0) Wide Channel A, SCSI ID=7, 32/255 SCBs (scsi0) Downloading sequencer code... 396 instructions downloaded (scsi1) <Adaptec AIC-7899 Ultra 160/m SCSI host adapter> found at PCI 0/5/1 (scsi1) Wide Channel B, SCSI ID=7, 32/255 SCBs (scsi1) Downloading sequencer code... 396 instructions downloaded scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.2.5/5.2.0 <Adaptec AIC-7899 Ultra 160/m...

https://bugzilla.redhat.com/show_bug.cgi?id=1441197

Hi, Is there something OS related (CentOS 5.1) I would need to do for a CLI created array to become visible to the OS after the array is created and initialized? I don't want to reboot... Thanks! jlc -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.centos.org/pipermail/centos/attachments/20080201/ed076445/attachment-0001.html>

hi all We have a rh linux server connected to two HP SAN controllers, one an HSV200 (on the way out), the other an HSV400 (on the way in). (Via a Qlogic HBA). /etc/multipath.conf contains this : device { vendor "(COMPAQ|HP)" product "HSV1[01]1|HSV2[01]0|HSV300|HSV4[05]0" getuid_callout "/sbin/scsi_id -g -u -s /block/%n"

...EXT2-fs warning: checktime reached, running e2fsck is recommended VFS: Mounted root (ext2 filesystem). (scsi0) <Adaptec AIC-7899 Ultra 160/m SCSI host adapter> found at PCI 3/4/0 (scsi0) Wide Channel A, SCSI ID=7, 32/255 SCBs (scsi0) Downloading sequencer code... 392 instructions downloaded (scsi1) <Adaptec AIC-7899 Ultra 160/m SCSI host adapter> found at PCI 3/4/1 (scsi1) Wide Channel B, SCSI ID=7, 32/255 SCBs (scsi1) Downloading sequencer code... 392 instructions downloaded scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.1.31/3.2.4 <Adaptec AIC-7899 Ultra 160/m...

...brary. Old log file (6.5): Sep 13 08:17:51 server1 kernel: scsi 1:2:0:0: Sequential-Access HP Ultrium 5-SCSI Z65W PQ: 0 ANSI: 6 Sep 13 08:17:51 server1 kernel: scsi 1:2:0:1: Medium Changer HP 1x8 G2 AUTOLDR 4.20 PQ: 0 ANSI: 5 New log file (6.6): Oct 28 18:15:06 server1 kernel: scsi1 : hpsa Oct 28 18:15:06 server1 kernel: hpsa 0000:0b:00.0: RAID device c1b3t0l0 added. Oct 28 18:15:06 server1 kernel: hpsa 0000:0b:00.0: Sequential-Access device c1b2t0l0 added. Oct 28 18:15:06 server1 kernel: scsi 1:3:0:0: RAID HP P212 5.14 PQ: 0 ANSI: 5 Oct 28 18:15:06 server...

...people, I installed a via SATA controller in a CentOS release 3.8 (Final) - I needed additional disk space. After the first boot, the kudzu service, added the following line to /etc/modules.conf: alias scsi_hostadapter sata_via and I rebooted. After reboot in dmesg one can see: scsi0 : sata_via scsi1 : sata_via Vendor: ATA Model: SAMSUNG HD080HJ Rev: WT10 Type: Direct-Access ANSI SCSI revision: 05 Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) sda: sda1 sda2 < sda5 > sda3 scsi : 0 host...

...CAPACITY(16). SCSI device sdc: 4374845440 512-byte hdwr sectors (2239921 MB) SCSI device sdc: drive cache: none sdc : very big device. try to use READ CAPACITY(16). SCSI device sdc: 4374845440 512-byte hdwr sectors (2239921 MB) SCSI device sdc: drive cache: none sdc: sdc1 Attached scsi disk sdc at scsi1, channel 0, id 0, lun 0 Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0 Attached scsi generic sg1 at scsi0, channel 0, id 7, lun 0, type 0 Attached scsi generic sg2 at scsi1, channel 0, id 0, lun 0, type 0 I can no longer mount sdc1; the error is the usual invalid superblock....

...0 Id: 08 Lun: 00 Vendor: DP Model: BACKPLANE Rev: 1.05 Type: Enclosure ANSI SCSI revision: 05 Host: scsi0 Channel: 02 Id: 00 Lun: 00 Vendor: DELL Model: PERC 5/i Rev: 1.03 Type: Direct-Access ANSI SCSI revision: 05 Host: scsi1 Channel: 00 Id: 06 Lun: 00 Vendor: CERTANCE Model: ULTRIUM 2 Rev: 1914 Type: Sequential-Access ANSI SCSI revision: 03 Host: scsi1 Channel: 00 Id: 06 Lun: 01 Vendor: DELL Model: PV-124T Rev: 0043 Type: Medium Changer ANSI SCSI revision...

.... A portion of the messages log is below. I would appreciate any ideas or directions. Thanks, Steve Moccio Aug 7 01:00:06 sshd(pam_unix)[18336]: session opened for user root by (uid=0) Aug 7 09:00:36 kernel: mptscsi: ioc1: attempting task abort! (sc=f6f07c80) Aug 7 09:00:36 kernel: scsi1 : destination target 0, lun 0 Aug 7 09:00:36 kernel: command = Write (10) 00 00 00 fb d7 00 01 90 00 Aug 7 09:00:38 kernel: mptbase: Initiating ioc1 recovery Aug 7 09:00:44 kernel: drivers/message/fusion/mptctl.c at 1985::mptctl_do_mpt_command - Busy with IOC Reset Aug 7 09:01:19 last...

...LVM 3. Guided - use entire disk and set up encrypted LVM 4. Manual Prompt: '?' for help> 1 [[[[...................]]]] Note that all data on the disk you select will be erased, but not before you have confirmed that you really want to make the changes. Select disk to partition: 1. SCSI1 (0,0,0) (sda) - 80.0 GB ATA WDC WD800JD-60LS [*] Prompt: '?' for help, default=1> [[[[...................]]]] !! ERROR: Debootstrap warning Warning: file:///cdrom/dists/etch/main/binary-i386/Packages.gz was corrupt [Press enter to continue] [[[[...................]]]] !! ERROR: Cannot a...

...LVM partition setup - OS-disk is /dev/sda, single filesystem-partition /dev/sda1 is labeled LABEL=/, and fstab uses the label to access the filesystem. I now add a SCSI-disk (previously used) to the onboard SCSI-controller, and the fun starts. The onboard controller is identified as scsi0 and scsi1, the SATA-disk sits on scsi2. SCSI-disk is thus /dev/sda, and SATA-disk becomes /dev/sdb. This should not be a problem as the fstab refers to the partition by label and not device name. And then disaster! While booting, the system issues 'Checking root filesystem' (I'm not 100% sure...

...hrough SCSI device sdc: 143374650 512-byte hdwr sectors (73408 MB) SCSI device sdc: drive cache: write through sdc: sdc1 Attached scsi disk sdc at scsi0, channel 0, id 2, lun 0 Vendor: PE/PV Model: 1x3 SCSI BP Rev: 1.1 Type: Processor ANSI SCSI revision: 02 scsi1 : ioc1: LSI53C1030, FwRev=01032300h, Ports=1, MaxQ=255, IRQ=19 Loading dm-mod.ko module device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com Loading md.ko module md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27 Loading raid1.ko module md: raid1 personality registered as nr 3...

...md 0x9F0 ctl 0xBF2 bmdma 0xD000 irq 193 ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xD008 irq 193 scsi0 : sata_nv ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-7, max UDMA/133, 320173056 sectors: LBA48 ata1.00: ata1: dev 0 multi count 16 ata1.00: configured for UDMA/133 scsi1 : sata_nv ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: ATA-7, max UDMA/133, 320173056 sectors: LBA48 ata2.00: ata2: dev 0 multi count 16 ata2.00: configured for UDMA/133 Vendor: ATA Model: Maxtor 6Y160M0 Rev: YAR5 Type: Direct-Access ANSI SCSI...

...sauron kernel: ata4: SATA max UDMA/133 cmd 0xF8874280 ctl 0x0 bmdma 0x0 irq 58 Jul 26 16:29:27 sauron kernel: ata5: SATA max UDMA/133 cmd 0xF8874300 ctl 0x0 bmdma 0x0 irq 58 Jul 26 16:29:27 sauron kernel: ata6: SATA max UDMA/133 cmd 0xF8874380 ctl 0x0 bmdma 0x0 irq 58 Jul 26 16:29:27 sauron kernel: scsi1 : ahci Jul 26 16:29:27 sauron kernel: ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Jul 26 16:29:27 sauron kernel: ata1.00: qc timeout (cmd 0xec) Jul 26 16:29:27 sauron kernel: ata1.00: failed to IDENTIFY (I/O error, err_mask=0x104) Jul 26 16:29:27 sauron kernel: ata1: SATA link up 1.5 Gbp...

...OS 6.4 on that "Maxtor 6Y120L0" hard disks? Regards, Meikel --- Output of "dmesg | grep -i ata" [ 1.690559] pata_via 0000:00:11.1: version 0.3.4 [ 1.690591] pata_via 0000:00:11.1: can't derive routing for PCI INT A [ 1.693019] scsi0 : pata_via [ 1.693396] scsi1 : pata_via [ 1.694434] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xa800 irq 14 [ 1.694442] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xa808 irq 15 [ 1.864541] ata1.00: ATA-7: Maxtor 6Y120L0, YAR41BW0, max UDMA/133 [ 1.864549] ata1.00: 240121728 sectors, multi 16: LBA [...

...32-504.1.3.el6.x86_64 #1 SMP Tue Nov 11 17:57:25 UTC 2014 # cat /etc/redhat-release CentOS release 6.6 (Final) # dmesg |grep LSI mpt2sas0: LSISAS2008: FWVersion(14.00.01.00), ChipRevision(0x03), BiosVersion(07.27.00.00) scsi 0:0:1:0: Enclosure LSI CORP SAS2X28 0717 PQ: 0 ANSI: 5 scsi1 : LSI SAS based MegaRAID driver scsi 1:0:8:0: Enclosure LSI CORP SAS2X36 0717 PQ: 0 ANSI: 5 scsi 1:2:0:0: Direct-Access LSI MR9261-8i 2.12 PQ: 0 ANSI: 5 scsi 1:2:1:0: Direct-Access LSI MR9261-8i 2.12 PQ: 0 ANSI: 5 scsi 1:2:2:0: Direct-Access LSI...