Displaying 20 results from an estimated 339 matches for "scsi0".
Did you mean:
scsi
2006 Nov 07
4
Problems with LTO-3 and U320 on Centos 4.4
...Channel A Target 1 Lun 1 Settings
Commands Queued 256
Commands Active 0
Command Openings 4
Max Tagged Openings 4
Device Queue Frozen Count 0
Errors from /var/log/messages on Centos 4.4.
Oct 30 22:02:13 gannet kernel: scsi0: Transmission error detected
Oct 30 22:02:13 gannet kernel: LQISTAT1[0x9] LASTPHASE[0x1]
SCSISIGI[0x20] PERRDIAG[0x24]
Oct 30 22:02:13 gannet kernel: >>>>>>>>>>>>>>>>>> Dump Card State Begins
<<<<<<<<<<<<<&...
2017 Apr 11
4
v2v: Implement -i vmx to read VMware vmx files directly (RHBZ#1441197).
https://bugzilla.redhat.com/show_bug.cgi?id=1441197
2006 Nov 29
1
SCSI drive offline
...re problem? cable? disk is dying? kernel problem?vmware problem?
and here is the dmesg dump when this problem happening..
Nov 26 08:41:43 server kernel: device eth2 entered promiscuous mode
Nov 26 08:41:43 server kernel: bridge-eth2: enabled promiscuous mode
Nov 27 19:12:07 server kernel: scsi0:0:1:0: Attempting to abort cmd f7a97500: 0x2a 0x0 0xc 0x7b 0x41 0x30 0x0 0x0 0x68 0x0
Nov 27 19:12:07 server kernel: scsi0: At time of recovery, card was not paused
Nov 27 19:12:07 server kernel: >>>>>>>>>>>>>>>>>> Dump Card State Begins <&...
2005 Oct 21
3
SCSI schizophrenia
OK - I only have one tape drive but a real problem these days backing
up. I ***may*** have connected the SCSI connector to the 'other'
external connector when shifting stuff around in the rack.
# cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: MegaRAID Model: LD 0 RAID5 69G Rev: 4.10
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi0 Channel: 04 Id: 06 Lun: 00
Vendor: PE/PV Model: 1x3 SCSI BP Rev: 1.1
Type: Processor ANSI SCSI revision:...
2013 Apr 10
1
virt-install on powerpc64 issues
...3c66fe2d -no-user-config -nodefaults -chardev
socket,id=charmonitor,path=/home/aik/.config/libvirt/qemu/lib/fc18guest5.monitor,server,nowait
-mon chardev=charmonitor,id=monitor,mode=control -rtc base=utc -no-reboot
-no-shutdown -device pci-ohci,id=usb,bus=pci,addr=0x1.0x2 -device
spapr-vscsi,id=scsi0,reg=0x2000 -drive
file=/home/aik/virtimg/fc18guest,if=none,id=drive-scsi0-0-0-0,format=raw
-device
scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0-0-0-0,id=scsi0-0-0-0,bootindex=2
-drive
file=/home/aik/virtimg/Fedora-18-ppc64-DVD.iso,if=none,id=drive-scsi0-0-0-1,readonly=on,for...
2005 May 17
0
data overrun on SCSI drive
I have a system that I just installed with CentOS 4.0. It is an HP
NetServer E 60 with dual CPUs and 1G RAM. There is an Adaptec AIC-7895
built into the motherboard.
On bootup, I get this:
(scsi0:A:1): 11.626MB/s transfers (5.813MHz, offset 8, 16bit)
(scsi0:A:1:0): data overrun detected in Data-in phase. Tag == 0x2.
(scsi0:A:1:0): Have seen Data Phase. Length = 255. NumSGs = 1.
sg[0] - Addr 0x03ace40 : Length 255
(scsi0:A:1:0): data overrun detected in Data-in phase. Tag == 0x3.
(scsi0:...
2014 Feb 05
2
Connecting disks to controller virtio-scsi of qemu/kvm
2017 Oct 11
3
[PATCH 0/2] v2v: -i vmx: Allow deviceType field to be completely omitted.
A colleague found some VMX files which omit the deviceType field.
This allows -i vmx mode to parse them.
Rich.
2014 Apr 23
1
Fwd: [s3-bug-review] [RHEL7] [Virtual disks] Met error messages while the guest OS booting up on a nbd device.
...;disk'>
<driver name='qemu' type='qcow2'/>
<source protocol='nbd'>
<host name='10.66.106.34' port='10809'/>
</source>
<target dev='sda' bus='scsi'/>
<alias name='scsi0-0-0-0'/>
<address type='drive' controller='0' bus='0' target='0' unit='0'/>
</disk>
# ps -ef| grep qemu-kvm| grep nbd
qemu 15724 1 99 09:58 ? 00:00:47 /usr/libexec/qemu-kvm -name r7g-qcow2
......
-drive file=nbd:10...
2006 Jan 06
2
3ware disk failure -> hang
I've got an i386 server running centos 4.2 with 3 3ware controllers in it
-- an 8006-2 for the system disks and 2 7500-8s. On the 7500s, I'm
running an all software RAID50. This morning I came in to find the system
hung. Turns out a disk went overnight on one of the 7500s, and rather
than a graceful failover I got this:
Jan 6 01:03:58 $SERVER kernel: 3w-xxxx: scsi2: Command
2006 Jan 07
3
Can I install CentOS 4.2 on Sun X4100?
...---------
SCSI subsystem initialized
Fusion MPT base driver 3.02.18
Copyright (c) 1999-2005 LSI Logic Corporation
ACPI: PCI interrupt 0000:02:03.0[A] -> GSI 28 (level, low) -> IRQ 209
mptbase: Initiating ioc0 bringup
ioc0: SAS1064: Capabilities={Initiator}
Fusion MPT SCSI Host driver 3.02.18
scsi0 : ioc0: LSISAS1064, FwRev=01040000h, Ports=1, MaxQ=203, IRQ=209
Vendor: FUJITSU Model: MAV2073RCSUN72G Rev: 0301
Type: Direct-Access ANSI SCSI revision: 04
SCSI device sda: 143374738 512-byte hdwr sectors (73408 MB)
SCSI device sda: drive cache: write through
sda: sd...
2013 Aug 20
2
Re: Oracle RAC in libvirt+KVM environment
...39;scsi'/>
<shareable/>
<address type='drive' controller='0' bus='0' target='0' unit='0'/>
</disk>
I got these errors:
char device redirected to /dev/pts/1 (label charserial0)
qemu-system-x86_64: -device
scsi-block,bus=scsi0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0-0-0-0,id=scsi0-0-0-0:
scsi-block: INQUIRY failed
qemu-system-x86_64: -device
scsi-block,bus=scsi0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0-0-0-0,id=scsi0-0-0-0:
Device 'scsi-block' could not be initialized
> Most important, it still wo...
2020 Oct 22
2
Why "discard":"unmap" is the default option for disks
...="disk">
<driver name="qemu" type="qcow2"/>
<source file="/var/lib/libvirt/images/new.qcow2" index="2"/>
<backingStore/>
<target dev="sda" bus="scsi"/>
<alias name="scsi0-0-0-0"/>
<address type="drive" controller="0" bus="0" target="0" unit="0"/>
</disk><disk type="network" device="disk">
<driver name="qemu" type="raw" error_policy=&...
2005 Dec 31
1
3ware error
I am getting this error:-
3w-9xxx: scsi0: ERROR: (0x03:0x0104): SGL entry has illegal
length:address=0x3744A000, length=0xFF, cmd=X.
In dmesg it finds the controller OK:-
3ware 9000 Storage Controller device driver for Linux v2.26.02.001.
ACPI: PCI interrupt 0000:01:06.0[A] -> GSI 11 (level, low) -> IRQ 11
scsi0 : 3ware 9000 Stora...
2013 Aug 20
2
Re: Oracle RAC in libvirt+KVM environment
...<address type='drive' controller='0' bus='0' target='0' unit='0'/>
>> </disk>
>> I got these errors:
>> char device redirected to /dev/pts/1 (label charserial0)
>> qemu-system-x86_64: -device
>> scsi-block,bus=scsi0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0-0-0-0,id=scsi0-0-0-0:
>> scsi-block: INQUIRY failed
>> qemu-system-x86_64: -device
>> scsi-block,bus=scsi0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0-0-0-0,id=scsi0-0-0-0:
>> Device 'scsi-block' could not be initialize...
2009 Jul 02
0
3w_9xxx + Xen-patched 2.6.30 dom0 == bad LUN detection
...reported" <-- I don''t
think so.
Xen 3.3.2 64bit, PAE dom0.
Here''s an excerpt from 2.6.30 (failing):
3ware 9000 Storage Controller device driver for Linux v2.26.02.012.
(XEN) PCI add device 09:01.0
3w-9xxx 0000:09:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
scsi0 : 3ware 9000 Storage Controller
3w-9xxx: scsi0: Found a 3ware 9000 Storage Controller at 0xda300000,
IRQ: 16.
3w-9xxx: scsi0: Firmware FE9X 3.04.00.005, BIOS BE9X 3.04.00.002, Ports: 4.
scsi 0:0:0:0: Direct-Access AMCC 9550SXU-4L DISK 3.04 PQ: 0 ANSI: 3
scsi: On host 0 channel 0 id 0 only...
2017 Oct 20
3
Re: terminating on signal 15 from pid 2146 (/usr/sbin/libvirtd)
...-config
>> -nodefaults -chardev
>>
>> socket,id=charmonitor,path=/var/lib/libvirt/qemu/domain-7-s390_generic/monitor.sock,server,nowait
>> -mon chardev=charmonitor,id=monitor,mode=control -rtc base=utc
>> -no-shutdown -boot strict=on -device
>> virtio-scsi-ccw,id=scsi0,devno=fe.0.0002 -drive
>>
>> file=/dev/lvm_pda/libvirt_s390,format=raw,if=none,id=drive-virtio-disk0,cache=none,aio=native
>> -device
>>
>> virtio-blk-ccw,scsi=off,devno=fe.0.0000,drive=drive-virtio-disk0,id=virtio-disk0,bootindex=1
>> -drive if=none,id=drive-scs...
2017 Oct 19
2
terminating on signal 15 from pid 2146 (/usr/sbin/libvirtd)
...16e-b636-447e-9fda-41d44616bce8 -display none -no-user-config
-nodefaults -chardev
socket,id=charmonitor,path=/var/lib/libvirt/qemu/domain-7-s390_generic/monitor.sock,server,nowait
-mon chardev=charmonitor,id=monitor,mode=control -rtc base=utc
-no-shutdown -boot strict=on -device
virtio-scsi-ccw,id=scsi0,devno=fe.0.0002 -drive
file=/dev/lvm_pda/libvirt_s390,format=raw,if=none,id=drive-virtio-disk0,cache=none,aio=native
-device
virtio-blk-ccw,scsi=off,devno=fe.0.0000,drive=drive-virtio-disk0,id=virtio-disk0,bootindex=1
-drive if=none,id=drive-scsi0-0-0-0,readonly=on -device
scsi-cd,bus=scsi0.0,chann...
2020 May 13
0
Running libvirtd inside chroot (mock to be precise)
...lay none -no-user-config -nodefaults -chardev
socket,id=charmonitor,fd=31,server,nowait -mon
chardev=charmonitor,id=monitor,mode=control -rtc base=utc -no-shutdown
-global PIIX4_PM.disable_s3=1 -global PIIX4_PM.disable_s4=1 -boot
menu=off,strict=on -device
virtio-scsi-pci,iothread=iothread1,id=scsi0,num_queues=2,bus=pci.0,addr=0x5
-device virtio-serial-pci,id=virtio-serial0,bus=pci.0,addr=0x6 -drive
file=/root/ovirt-system-tests/deployment-basic-suite-master/default/images/lago-basic-suite-master-engine_root.qcow2,format=qcow2,if=none,id=drive-virtio-disk0,serial=1,cache=writeback,discard=un...
2006 Feb 24
3
Dom0 lvm/software raid rhel4.1 booting issues.
...8
mptbase: Initiating ioc0 bringup
ioc0: 53C1030: Capabilities={Initiator,Target}
ACPI: PCI Interrupt 0000:04:05.1[B] -> GSI 19 (level, low) -> IRQ 19
mptbase: Initiating ioc1 bringup
ioc1: 53C1030: Capabilities={Initiator,Target}
Loading mptscsih.ko module
Fusion MPT SCSI Host driver 3.01.20
scsi0 : ioc0: LSI53C1030, FwRev=01032300h, Ports=1, MaxQ=255, IRQ=18
Vendor: FUJITSU Model: MAP3735NC Rev: 5608
Type: Direct-Access ANSI SCSI revision: 03
SCSI device sda: 143374650 512-byte hdwr sectors (73408 MB)
SCSI device sda: drive cache: write through
SCSI devi...