A. Rosina Bignall
2003-Jan-10 18:36 UTC
[Samba] Please help! Updated to Redhat 8.0, now can't get samba to work
I just installed Redhat 8.0, got the errata samba packages, but I still
can't get Samba to work. I have gone through the Diagnosis.txt file
with the following results:
Test 1:
everything appears OK
Test 2:
pings work both ways
Test 3:
OK
Test 4:
# nmblookup -B lion __SAMBA__
querying __SAMBA__ on 192.168.8.14
192.168.8.14 __SAMBA__<00>
OK
Test 5:
# nmblookup -B cub '*'
querying * on 192.168.8.15
192.168.8.15 *<00>
Test 6:
# nmblookup -d 2 '*'
added interface ip=192.168.8.14 bcast=192.168.255.255 nmask=255.255.0.0
added interface ip=172.16.191.1 bcast=172.16.191.255 nmask=255.255.255.0
added interface ip=192.168.250.1 bcast=192.168.250.255
nmask=255.255.255.0
querying * on 192.168.255.255
querying * on 172.16.191.255
Got a positive name query response from 172.16.191.128 ( 172.16.191.128)
172.16.191.128 *<00>
Not the same as Test 5, but I think it's still okay.
Test 7:
OK
Test 8:
C:\WINDOWS> net view \\lion
Error 59: An unexpected network error has occurred. Quit all running
programs, restart your computer, and then try again. If the problem
persists, contact your network administrator.
The problem persists. I'm not an expert in network stuff and this is
just a network between my Linux host and my PC runinng on VMWare on the
same machine. I have no idea what would cause this. Please help.
Test 9:
C:\WINDOWS> net use x: \\lion\tmp
Same message as in Test 8
Test 10:
# nmblookup -M Workgroup
querying Workgroup on 192.168.255.255
querying Workgroup on 172.16.191.255
172.16.191.128 Workgroup<1d>
Test 11:
File manager won't connect to it.
Please help me understand what is wrong and how to fix it. Below, I've
included my smb.conf. Let me know of any other information that is
needed.
Thanks!
Rosina
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options (perhaps too
# many!) most of which are not shown in this example
#
# Any line which starts with a ; (semi-colon) or a # (hash)
# is a comment and is ignored. In this example we will use a #
# for commentry and a ; for parts of the config file that you
# may wish to enable
#
# NOTE: Whenever you modify this file you should run the command
"testparm"
# to check that you have not made any basic syntactic errors.
#
#======================= Global Settings
====================================[global]
# workgroup = NT-Domain-Name or Workgroup-Name
workgroup = Workgroup
# server string is the equivalent of the NT Description field
server string = Samba Server
# This option is important for security. It allows you to restrict
# connections to machines which are on your local network. The
# following example restricts access to two C class networks and
# the "loopback" interface. For more examples of the syntax see
# the smb.conf man page
hosts deny = ALL
hosts allow = 192.168. 127. 172.16.
# if you want to automatically load your printer list rather
# than setting them up individually then you'll need this
printcap name = /etc/printcap
load printers = yes
# It should not be necessary to spell out the print system type unless
# yours is non-standard. Currently supported print systems include:
# bsd, sysv, plp, lprng, aix, hpux, qnx
printing = lprng
# Uncomment this if you want a guest account, you must add this to /etc/passwd
# otherwise the user "nobody" is used
; guest account = pcguest
# this tells Samba to use a separate log file for each machine
# that connects
log file = /var/log/samba/%m.log
# Put a capping on the size of the log files (in Kb).
max log size = 50
# Security mode. Most people will want user level security. See
# security_level.txt for details.
security = user
# Use password server option only with security = server
# The argument list may include:
# password server = My_PDC_Name [My_BDC_Name] [My_Next_BDC_Name]
# or to auto-locate the domain controller/s
# password server = *
; password server = <NT-Server-Name>
# Password Level allows matching of _n_ characters of the password for
# all combinations of upper and lower case.
; password level = 8
; username level = 8
# You may wish to use password encryption. Please read
# ENCRYPTION.txt, Win95.txt and WinNT.txt in the Samba documentation.
# Do not enable this option unless you have read those documents
encrypt passwords = yes
smb passwd file = /etc/samba/smbpasswd
# The following is needed to keep smbclient from spouting spurious errors
# when Samba is built with support for SSL.
; ssl CA certFile = /usr/share/ssl/certs/ca-bundle.crt
# The following are needed to allow password changing from Windows to
# update the Linux system password also.
# NOTE: Use these with 'encrypt passwords' and 'smb passwd file'
above.
# NOTE2: You do NOT need these to allow workstations to change only
# the encrypted SMB passwords. They allow the Unix password
# to be kept in sync with the SMB password.
; unix password sync = Yes
; passwd program = /usr/bin/passwd %u
; passwd chat = *New*password* %n\n *Retype*new*password* %n\n
*passwd:*all*authentication*tokens*updated*successfully*
# You can use PAM's password change control flag for Samba. If
# enabled, then PAM will be used for password changes when requested
# by an SMB client instead of the program listed in passwd program.
# It should be possible to enable this without changing your passwd
# chat parameter for most setups.
pam password change = yes
# Unix users can map to different SMB User names
; username map = /etc/samba/smbusers
# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
; include = /etc/samba/smb.conf.%m
# This parameter will control whether or not Samba should obey PAM's
# account and session management directives. The default behavior is
# to use PAM for clear text authentication only and to ignore any
# account or session management. Note that Samba always ignores PAM
# for authentication in the case of encrypt passwords = yes
obey pam restrictions = yes
# Most people will find that this option gives better performance.
# See speed.txt and the manual pages for details
socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192
# Configure Samba to use multiple interfaces
# If you have multiple network interfaces then you must list them
# here. See the man page for details.
; interfaces = 192.168.12.2/24 192.168.13.2/24
# Configure remote browse list synchronisation here
# request announcement to, or browse list sync from:
# a specific host or from / to a whole subnet (see below)
; remote browse sync = 192.168.3.25 192.168.5.255
# Cause this host to announce itself to local subnets here
;remote announce = 192.168.1.255 192.168.2.44
remote announce = 192.168.1.255 192.168.2.44 192.168.8.255
# Browser Control Options:
# set local master to no if you don't want Samba to become a master
# browser on your network. Otherwise the normal election rules apply
; local master = no
# OS Level determines the precedence of this server in master browser
# elections. The default value should be reasonable
; os level = 33
# Domain Master specifies Samba to be the Domain Master Browser. This
# allows Samba to collate browse lists between subnets. Don't use this
# if you already have a Windows NT domain controller doing this job
; domain master = yes
# Preferred Master causes Samba to force a local browser election on startup
# and gives it a slightly higher chance of winning the election
preferred master = yes
# Enable this if you want Samba to be a domain logon server for
# Windows95 workstations.
; domain logons = yes
# if you enable domain logons then you may want a per-machine or
# per user logon script
# run a specific logon batch file per workstation (machine)
; logon script = %m.bat
# run a specific logon batch file per username
; logon script = %U.bat
# Where to store roving profiles (only for Win95 and WinNT)
# %L substitutes for this servers netbios name, %U is username
# You must uncomment the [Profiles] share below
; logon path = \\%L\Profiles\%U
# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable it's WINS
Server
wins support = yes
# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
; wins server = w.x.y.z
# WINS Proxy - Tells Samba to answer name resolution queries on
# behalf of a non WINS capable client, for this to work there must be
# at least one WINS Server on the network. The default is NO.
; wins proxy = yes
# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
# via DNS nslookups. The built-in default for versions 1.9.17 is yes,
# this has been changed in version 1.9.18 to no.
dns proxy = yes
password level = 0
preferred master = no
os level = 0
null passwords = no
dead time = 0
debug level = 0
domain master = no
comment = Samba Server
allow hosts = 192.168. 127.
deny hosts = ALL
# Case Preservation can be handy - system default is _no_
# NOTE: These can be set on a per share basis
; preserve case = no
; short preserve case = no
# Default case is normally upper case for all DOS files
; default case = lower
# Be very careful with case sensitivity - it can break things!
; case sensitive = no
#============================ Share Definitions
=============================[homes]
comment = Home Directories
browseable = no
writable = yes
valid users = %S
create mode = 0664
directory mode = 0775
# If you want users samba doesn't recognize to be mapped to a guest user
; map to guest = bad user
# Un-comment the following and create the netlogon directory for Domain Logons
; [netlogon]
; comment = Network Logon Service
; path = /usr/local/samba/lib/netlogon
; guest ok = yes
; writable = no
; share modes = no
# Un-comment the following to provide a specific roving profile share
# the default is to use the user's home directory
;[Profiles]
; path = /usr/local/samba/profiles
; browseable = no
; guest ok = yes
# NOTE: If you have a BSD-style print system there is no need to
# specifically define each individual printer
[printers]
comment = All Printers
path = /var/spool/samba
browseable = no
# Set public = yes to allow user 'guest account' to print
guest ok = no
writable = no
printable = yes
# This one is useful for people to share files
[tmp]
comment = Temporary file space
path = /tmp
read only = no
public = yes
# Paradox files for Universal Industrial Sales
[Pdox]
comment = UIS Paradox
path = /mnt/dos/MyFiles/pdox
valid users = rbignall
public = no
writable = yes
printable = no
# Paradox files for Universal Industrial Sales
[DosWinProgs]
comment = DOS/Windoze programs
path = /mnt/dos/
public = yes
writable = no
printable = no
[UIS]
comment = Universal Industrial Sales
available = yes
path = /home/rbignall/business/consulting/UniversalIndustrial
public = no
guest only = no
writable = yes
browseable = yes
valid users = rbignall
only user = no
naugaranch
2003-Jan-12 04:23 UTC
[Samba] Please help! Updated to Redhat 8.0, now can't get samba to work
A couple of questions,
Did you re-establish user passwords in Samba?
Why do you have the smb.conf line....
deny hosts = ALL
Seems like this would reject all connections.
Is the firewall running (IPCHAINS & IPTABLES). If so, have you set it up
properly?
-----Original Message-----
From: samba-admin@lists.samba.org [mailto:samba-admin@lists.samba.org]On
Behalf Of A. Rosina Bignall
Sent: Friday, January 10, 2003 12:35 PM
To: samba@lists.samba.org
Subject: [Samba] Please help! Updated to Redhat 8.0, now can't get samba
to work
I just installed Redhat 8.0, got the errata samba packages, but I still
can't get Samba to work. I have gone through the Diagnosis.txt file
with the following results:
Test 1:
everything appears OK
Test 2:
pings work both ways
Test 3:
OK
Test 4:
# nmblookup -B lion __SAMBA__
querying __SAMBA__ on 192.168.8.14
192.168.8.14 __SAMBA__<00>
OK
Test 5:
# nmblookup -B cub '*'
querying * on 192.168.8.15
192.168.8.15 *<00>
Test 6:
# nmblookup -d 2 '*'
added interface ip=192.168.8.14 bcast=192.168.255.255 nmask=255.255.0.0
added interface ip=172.16.191.1 bcast=172.16.191.255 nmask=255.255.255.0
added interface ip=192.168.250.1 bcast=192.168.250.255
nmask=255.255.255.0
querying * on 192.168.255.255
querying * on 172.16.191.255
Got a positive name query response from 172.16.191.128 ( 172.16.191.128)
172.16.191.128 *<00>
Not the same as Test 5, but I think it's still okay.
Test 7:
OK
Test 8:
C:\WINDOWS> net view \\lion
Error 59: An unexpected network error has occurred. Quit all running
programs, restart your computer, and then try again. If the problem
persists, contact your network administrator.
The problem persists. I'm not an expert in network stuff and this is
just a network between my Linux host and my PC runinng on VMWare on the
same machine. I have no idea what would cause this. Please help.
Test 9:
C:\WINDOWS> net use x: \\lion\tmp
Same message as in Test 8
Test 10:
# nmblookup -M Workgroup
querying Workgroup on 192.168.255.255
querying Workgroup on 172.16.191.255
172.16.191.128 Workgroup<1d>
Test 11:
File manager won't connect to it.
Please help me understand what is wrong and how to fix it. Below, I've
included my smb.conf. Let me know of any other information that is
needed.
Thanks!
Rosina
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options (perhaps too
# many!) most of which are not shown in this example
#
# Any line which starts with a ; (semi-colon) or a # (hash)
# is a comment and is ignored. In this example we will use a #
# for commentry and a ; for parts of the config file that you
# may wish to enable
#
# NOTE: Whenever you modify this file you should run the command
"testparm"
# to check that you have not made any basic syntactic errors.
#
#======================= Global Settings
====================================[global]
# workgroup = NT-Domain-Name or Workgroup-Name
workgroup = Workgroup
# server string is the equivalent of the NT Description field
server string = Samba Server
# This option is important for security. It allows you to restrict
# connections to machines which are on your local network. The
# following example restricts access to two C class networks and
# the "loopback" interface. For more examples of the syntax see
# the smb.conf man page
hosts deny = ALL
hosts allow = 192.168. 127. 172.16.
# if you want to automatically load your printer list rather
# than setting them up individually then you'll need this
printcap name = /etc/printcap
load printers = yes
# It should not be necessary to spell out the print system type unless
# yours is non-standard. Currently supported print systems include:
# bsd, sysv, plp, lprng, aix, hpux, qnx
printing = lprng
# Uncomment this if you want a guest account, you must add this to
/etc/passwd
# otherwise the user "nobody" is used
; guest account = pcguest
# this tells Samba to use a separate log file for each machine
# that connects
log file = /var/log/samba/%m.log
# Put a capping on the size of the log files (in Kb).
max log size = 50
# Security mode. Most people will want user level security. See
# security_level.txt for details.
security = user
# Use password server option only with security = server
# The argument list may include:
# password server = My_PDC_Name [My_BDC_Name] [My_Next_BDC_Name]
# or to auto-locate the domain controller/s
# password server = *
; password server = <NT-Server-Name>
# Password Level allows matching of _n_ characters of the password for
# all combinations of upper and lower case.
; password level = 8
; username level = 8
# You may wish to use password encryption. Please read
# ENCRYPTION.txt, Win95.txt and WinNT.txt in the Samba documentation.
# Do not enable this option unless you have read those documents
encrypt passwords = yes
smb passwd file = /etc/samba/smbpasswd
# The following is needed to keep smbclient from spouting spurious errors
# when Samba is built with support for SSL.
; ssl CA certFile = /usr/share/ssl/certs/ca-bundle.crt
# The following are needed to allow password changing from Windows to
# update the Linux system password also.
# NOTE: Use these with 'encrypt passwords' and 'smb passwd file'
above.
# NOTE2: You do NOT need these to allow workstations to change only
# the encrypted SMB passwords. They allow the Unix password
# to be kept in sync with the SMB password.
; unix password sync = Yes
; passwd program = /usr/bin/passwd %u
; passwd chat = *New*password* %n\n *Retype*new*password* %n\n
*passwd:*all*authentication*tokens*updated*successfully*
# You can use PAM's password change control flag for Samba. If
# enabled, then PAM will be used for password changes when requested
# by an SMB client instead of the program listed in passwd program.
# It should be possible to enable this without changing your passwd
# chat parameter for most setups.
pam password change = yes
# Unix users can map to different SMB User names
; username map = /etc/samba/smbusers
# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
; include = /etc/samba/smb.conf.%m
# This parameter will control whether or not Samba should obey PAM's
# account and session management directives. The default behavior is
# to use PAM for clear text authentication only and to ignore any
# account or session management. Note that Samba always ignores PAM
# for authentication in the case of encrypt passwords = yes
obey pam restrictions = yes
# Most people will find that this option gives better performance.
# See speed.txt and the manual pages for details
socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192
# Configure Samba to use multiple interfaces
# If you have multiple network interfaces then you must list them
# here. See the man page for details.
; interfaces = 192.168.12.2/24 192.168.13.2/24
# Configure remote browse list synchronisation here
# request announcement to, or browse list sync from:
# a specific host or from / to a whole subnet (see below)
; remote browse sync = 192.168.3.25 192.168.5.255
# Cause this host to announce itself to local subnets here
;remote announce = 192.168.1.255 192.168.2.44
remote announce = 192.168.1.255 192.168.2.44 192.168.8.255
# Browser Control Options:
# set local master to no if you don't want Samba to become a master
# browser on your network. Otherwise the normal election rules apply
; local master = no
# OS Level determines the precedence of this server in master browser
# elections. The default value should be reasonable
; os level = 33
# Domain Master specifies Samba to be the Domain Master Browser. This
# allows Samba to collate browse lists between subnets. Don't use this
# if you already have a Windows NT domain controller doing this job
; domain master = yes
# Preferred Master causes Samba to force a local browser election on startup
# and gives it a slightly higher chance of winning the election
preferred master = yes
# Enable this if you want Samba to be a domain logon server for
# Windows95 workstations.
; domain logons = yes
# if you enable domain logons then you may want a per-machine or
# per user logon script
# run a specific logon batch file per workstation (machine)
; logon script = %m.bat
# run a specific logon batch file per username
; logon script = %U.bat
# Where to store roving profiles (only for Win95 and WinNT)
# %L substitutes for this servers netbios name, %U is username
# You must uncomment the [Profiles] share below
; logon path = \\%L\Profiles\%U
# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable it's WINS
Server
wins support = yes
# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
; wins server = w.x.y.z
# WINS Proxy - Tells Samba to answer name resolution queries on
# behalf of a non WINS capable client, for this to work there must be
# at least one WINS Server on the network. The default is NO.
; wins proxy = yes
# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
# via DNS nslookups. The built-in default for versions 1.9.17 is yes,
# this has been changed in version 1.9.18 to no.
dns proxy = yes
password level = 0
preferred master = no
os level = 0
null passwords = no
dead time = 0
debug level = 0
domain master = no
comment = Samba Server
allow hosts = 192.168. 127.
deny hosts = ALL
# Case Preservation can be handy - system default is _no_
# NOTE: These can be set on a per share basis
; preserve case = no
; short preserve case = no
# Default case is normally upper case for all DOS files
; default case = lower
# Be very careful with case sensitivity - it can break things!
; case sensitive = no
#============================ Share Definitions
=============================[homes]
comment = Home Directories
browseable = no
writable = yes
valid users = %S
create mode = 0664
directory mode = 0775
# If you want users samba doesn't recognize to be mapped to a guest user
; map to guest = bad user
# Un-comment the following and create the netlogon directory for Domain
Logons
; [netlogon]
; comment = Network Logon Service
; path = /usr/local/samba/lib/netlogon
; guest ok = yes
; writable = no
; share modes = no
# Un-comment the following to provide a specific roving profile share
# the default is to use the user's home directory
;[Profiles]
; path = /usr/local/samba/profiles
; browseable = no
; guest ok = yes
# NOTE: If you have a BSD-style print system there is no need to
# specifically define each individual printer
[printers]
comment = All Printers
path = /var/spool/samba
browseable = no
# Set public = yes to allow user 'guest account' to print
guest ok = no
writable = no
printable = yes
# This one is useful for people to share files
[tmp]
comment = Temporary file space
path = /tmp
read only = no
public = yes
# Paradox files for Universal Industrial Sales
[Pdox]
comment = UIS Paradox
path = /mnt/dos/MyFiles/pdox
valid users = rbignall
public = no
writable = yes
printable = no
# Paradox files for Universal Industrial Sales
[DosWinProgs]
comment = DOS/Windoze programs
path = /mnt/dos/
public = yes
writable = no
printable = no
[UIS]
comment = Universal Industrial Sales
available = yes
path = /home/rbignall/business/consulting/UniversalIndustrial
public = no
guest only = no
writable = yes
browseable = yes
valid users = rbignall
only user = no
--
To unsubscribe from this list go to the following URL and read the
instructions: http://lists.samba.org/mailman/listinfo/samba