List:
I have an Eaton (Powerware) Model 5115 and am using the bcmxcp_usb driver
on a OpenBSD 4.9 system. The upsdrvctl start appears to work and I get a
message in my daemon log stating that it successfully started. I can
successfully start the upsd daemon. I get a successful start messaage from
the upsmon program, but it soon complains of 'stale' data. It looks
like
the driver seems to run for a couple of minutes and then dies. I pressed
^C at after waiting for more messages. The last part of this log shows the
data until the driver finally stopped. I have waited in the past for over
30 minutes before pressing ^C and there isn't any further activity.
# /usr/local/bin/bcmxcp_usb -DDDDD -a eaton
Network UPS Tools - BCMXCP UPS driver 0.24 (2.6.1)
USB communication subdriver 0.18
0.000000 send_to_all: SETINFO driver.parameter.port "auto"
0.000302 debug level is '5'
0.011901 device /dev/ugen0 opened successfully
0.014824 send_to_all: SETINFO device.type "ups"
0.014868 send_to_all: SETINFO driver.version "2.6.1"
0.014911 send_to_all: SETINFO driver.version.internal "0.24"
0.014972 send_to_all: SETINFO driver.name "bcmxcp_usb"
1.026913 entering get_answer(31)
6.026797 get_answer: exiting (len=0)
7.046961 entering get_answer(31)
7.047086 get_answer: (156 bytes) => ab 01 73 01 02 20 01 02 01 00 0f
00 01 00 09 50
7.047225 57 35 31 31 35 20 52 4d 51 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00
7.047332 00 00 00 00 00 f0 00 f0 00 00 00 52 52 00 00 00 00 52 f0
e2 00 00 00 00 00
7.047431 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0 00 00 f0
00 00 f0 00 00 41
7.047542 00 00 41 00 00 f0 00 00 00 00 00 00 f0 00 00 1b c0 01 00
82 04 00 80 0b 00
7.047649 00 00 00 57 ab 01 1f 82 00 00 00 40 00 00 00 00 00 05 00
80 02 08 00 50 00
7.047733 00 00 00 00 00 03 00 1b 1a 00 0e 00 10 00 3e
7.047789 get_answer: block_number = 1
7.047819 get_answer: data length = 115
7.047873 get_answer: sequence number (1) is ok
7.047911 get_answer: checksum is ok
7.048005 get_answer: block_number = 1
7.048048 get_answer: data length = 31
7.048088 get_answer: sequence number (2) is ok
7.048127 get_answer: checksum is ok
7.048164 get_answer: all data received
7.048204 get_answer: exiting (len=146)
7.048271 send_to_all: SETINFO ups.firmware "Cont:01.20
Inve:01.02"
7.048329 send_to_all: SETINFO ups.power.nominal "750"
7.048387 send_to_all: SETINFO output.phases "1"
7.048465 send_to_all: SETINFO ups.mfr "Eaton"
7.048594 send_to_all: SETINFO ups.model "PW5115 RM 750i"
7.048652 Length of meter map: 81
7.048682 Index Offset Format NUT
7.048739 0021 0000 f0 None
7.048807 0023 0004 f0 ups.power
7.048851 0027 0008 52 output.frequency
7.048904 0028 0012 52 input.frequency
7.048970 0033 0016 52 battery.voltage
7.049029 0034 0020 f0 battery.charge
7.049108 0035 0024 e2 battery.runtime
7.049172 0056 0028 f0 input.voltage
7.049209 0059 0032 f0 None
7.049242 0062 0036 f0 ambient.temperature
7.049275 0065 0040 41 output.current
7.049313 0068 0044 41 output.current.nominal
7.049347 0071 0048 f0 None
7.049380 0078 0052 f0 output.voltage
7.049414
7.049447 Length of alarm map: 27
7.049476 Index Alarm Supported
7.049509 -001 INVERTER_AC_OVER_VOLTAGE No
7.049540 -001 INVERTER_AC_UNDER_VOLTAGE No
7.049572 -001 INVERTER_OVER_OR_UNDER_FREQ No
7.049607 -001 BYPASS_AC_OVER_VOLTAGE No
7.049639 -001 BYPASS_AC_UNDER_VOLTAGE No
7.049674 -001 BYPASS_OVER_OR_UNDER_FREQ No
7.049704 0000 INPUT_AC_OVER_VOLTAGE Yes
7.049736 0001 INPUT_AC_UNDER_VOLTAGE Yes
7.049765 0002 INPUT_UNDER_OR_OVER_FREQ Yes
7.049797 -001 OUTPUT_OVER_VOLTAGE No
7.049833 -001 OUTPUT_UNDER_VOLTAGE No
7.049866 -001 OUTPUT_UNDER_OR_OVER_FREQ No
7.049897 -001 REMOTE_EMERGENCY_PWR_OFF No
7.049930 -001 REMOTE_GO_TO_BYPASS No
7.049961 -001 BUILDING_ALARM_6 No
7.049991 -001 BUILDING_ALARM_5 No
7.050023 -001 BUILDING_ALARM_4 No
7.050053 -001 BUILDING_ALARM_3 No
7.050084 -001 BUILDING_ALARM_2 No
7.050114 -001 BUILDING_ALARM_1 No
7.050145 -001 STATIC_SWITCH_OVER_TEMP No
7.050181 -001 CHARGER_OVER_TEMP No
7.050212 -001 CHARGER_LOGIC_PWR_FAIL No
7.050244 -001 CHARGER_OVER_VOLTAGE_OR_CURRENT No
7.050276 -001 INVERTER_OVER_TEMP No
7.050308 0003 OUTPUT_OVERLOAD Yes
7.050337 -001 RECTIFIER_INPUT_OVER_CURRENT No
7.050369 -001 INVERTER_OUTPUT_OVER_CURRENT No
7.050399 -001 DC_LINK_OVER_VOLTAGE No
7.050432 -001 DC_LINK_UNDER_VOLTAGE No
7.050462 -001 RECTIFIER_FAILED No
7.050493 0004 INVERTER_FAULT Yes
7.050523 -001 BATTERY_CONNECTOR_FAIL No
7.050554 -001 BYPASS_BREAKER_FAIL No
7.050584 0005 CHARGER_FAIL Yes
7.050615 -001 RAMP_UP_FAILED No
7.050651 -001 STATIC_SWITCH_FAILED No
7.050682 -001 ANALOG_AD_REF_FAIL No
7.050718 -001 BYPASS_UNCALIBRATED No
7.050748 -001 RECTIFIER_UNCALIBRATED No
7.050779 -001 OUTPUT_UNCALIBRATED No
7.050809 -001 INVERTER_UNCALIBRATED No
7.050840 -001 DC_VOLT_UNCALIBRATED No
7.050876 -001 OUTPUT_CURRENT_UNCALIBRATED No
7.050908 -001 RECTIFIER_CURRENT_UNCALIBRATED No
7.050939 -001 BATTERY_CURRENT_UNCALIBRATED No
7.050970 -001 INVERTER_ON_OFF_STAT_FAIL No
7.051000 -001 BATTERY_CURRENT_LIMIT No
7.051030 -001 INVERTER_STARTUP_FAIL No
7.051061 -001 ANALOG_BOARD_AD_STAT_FAIL No
7.051092 -001 OUTPUT_CURRENT_OVER_100 No
7.051124 -001 BATTERY_GROUND_FAULT No
7.051153 -001 WAITING_FOR_CHARGER_SYNC No
7.051185 -001 NV_RAM_FAIL No
7.051215 -001 ANALOG_BOARD_AD_TIMEOUT No
7.051248 0006 SHUTDOWN_IMMINENT Yes
7.051277 0007 BATTERY_LOW Yes
7.051313 0008 UTILITY_FAIL Yes
7.051343 -001 OUTPUT_SHORT_CIRCUIT No
7.051374 0009 UTILITY_NOT_PRESENT Yes
7.051407 -001 FULL_TIME_CHARGING No
7.051439 -001 FAST_BYPASS_COMMAND No
7.051470 -001 AD_ERROR No
7.051502 -001 INTERNAL_COM_FAIL No
7.051534 -001 RECTIFIER_SELFTEST_FAIL No
7.051570 -001 RECTIFIER_EEPROM_FAIL No
7.051601 -001 RECTIFIER_EPROM_FAIL No
7.051632 -001 INPUT_LINE_VOLTAGE_LOSS No
7.051665 -001 BATTERY_DC_OVER_VOLTAGE No
7.051696 -001 POWER_SUPPLY_OVER_TEMP No
7.051732 -001 POWER_SUPPLY_FAIL No
7.051764 -001 POWER_SUPPLY_5V_FAIL No
7.051794 -001 POWER_SUPPLY_12V_FAIL No
7.051828 -001 HEATSINK_OVER_TEMP No
7.051859 -001 HEATSINK_TEMP_SENSOR_FAIL No
7.051888 -001 RECTIFIER_CURRENT_OVER_125 No
7.051920 -001 RECTIFIER_FAULT_INTERRUPT_FAIL No
7.051949 -001 RECTIFIER_POWER_CAPASITOR_FAIL No
7.051982 -001 INVERTER_PROGRAM_STACK_ERROR No
7.052011 -001 INVERTER_BOARD_SELFTEST_FAIL No
7.052043 -001 INVERTER_AD_SELFTEST_FAIL No
7.052073 -001 INVERTER_RAM_SELFTEST_FAIL No
7.052105 -001 NV_MEMORY_CHECKSUM_FAIL No
7.052135 -001 PROGRAM_CHECKSUM_FAIL No
7.052167 -001 INVERTER_CPU_SELFTEST_FAIL No
7.052196 -001 NETWORK_NOT_RESPONDING No
7.052228 -001 FRONT_PANEL_SELFTEST_FAIL No
7.052265 -001 NODE_EEPROM_VERIFICATION_ERROR No
7.052288 -001 OUTPUT_AC_OVER_VOLT_TEST_FAIL No
7.052307 -001 OUTPUT_DC_OVER_VOLTAGE No
7.052327 -001 INPUT_PHASE_ROTATION_ERROR No
7.052346 -001 INVERTER_RAMP_UP_TEST_FAILED No
7.052366 -001 INVERTER_OFF_COMMAND No
7.052385 -001 INVERTER_ON_COMMAND No
7.052404 -001 TO_BYPASS_COMMAND No
7.052424 -001 FROM_BYPASS_COMMAND No
7.052443 -001 AUTO_MODE_COMMAND No
7.052462 -001 EMERGENCY_SHUTDOWN_COMMAND No
7.052481 -001 SETUP_SWITCH_OPEN No
7.052500 -001 INVERTER_OVER_VOLT_INT No
7.052519 -001 INVERTER_UNDER_VOLT_INT No
7.052539 -001 ABSOLUTE_DCOV_ACOV No
7.052558 -001 PHASE_A_CURRENT_LIMIT No
7.052577 -001 PHASE_B_CURRENT_LIMIT No
7.281008 -001 PHASE_C_CURRENT_LIMIT No
7.281054 -001 BYPASS_NOT_AVAILABLE No
7.281104 -001 RECTIFIER_BREAKER_OPEN No
7.281147 -001 BATTERY_CONTACTOR_OPEN No
7.281213 -001 INVERTER_CONTACTOR_OPEN No
7.281248 -001 BYPASS_BREAKER_OPEN No
7.281296 -001 INV_BOARD_ACOV_INT_TEST_FAIL No
7.281337 -001 INVERTER_OVER_TEMP_TRIP No
7.281381 -001 INV_BOARD_ACUV_INT_TEST_FAIL No
7.281423 -001 INVERTER_VOLTAGE_FEEDBACK_ERROR No
7.281476 -001 DC_UNDER_VOLTAGE_TIMEOUT No
7.281508 -001 AC_UNDER_VOLTAGE_TIMEOUT No
7.281565 -001 DC_UNDER_VOLTAGE_WHILE_CHARGE No
7.281596 -001 INVERTER_VOLTAGE_BIAS_ERROR No
7.281644 -001 RECTIFIER_PHASE_ROTATION No
7.281686 -001 BYPASS_PHASER_ROTATION No
7.281742 -001 SYSTEM_INTERFACE_BOARD_FAIL No
7.281774 -001 PARALLEL_BOARD_FAIL No
7.281822 -001 LOST_LOAD_SHARING_PHASE_A No
7.281915 -001 LOST_LOAD_SHARING_PHASE_B No
7.281973 -001 LOST_LOAD_SHARING_PHASE_C No
7.282015 -001 DC_OVER_VOLTAGE_TIMEOUT No
7.282073 0010 BATTERY_TOTALLY_DISCHARGED Yes
7.282128 -001 INVERTER_PHASE_BIAS_ERROR No
7.282168 -001 INVERTER_VOLTAGE_BIAS_ERROR_2 No
7.282220 -001 DC_LINK_BLEED_COMPLETE No
7.282259 -001 LARGE_CHARGER_INPUT_CURRENT No
7.282314 -001 INV_VOLT_TOO_LOW_FOR_RAMP_LEVEL No
7.282371 -001 LOSS_OF_REDUNDANCY No
7.282411 -001 LOSS_OF_SYNC_BUS No
7.282464 -001 RECTIFIER_BREAKER_SHUNT_TRIP No
7.282503 -001 LOSS_OF_CHARGER_SYNC No
7.282559 -001 INVERTER_LOW_LEVEL_TEST_TIMEOUT No
7.282613 -001 OUTPUT_BREAKER_OPEN No
7.282658 -001 CONTROL_POWER_ON No
7.282718 -001 INVERTER_ON No
7.282750 -001 CHARGER_ON No
7.282795 -001 BYPASS_ON No
7.282843 -001 BYPASS_POWER_LOSS No
7.282886 -001 ON_MANUAL_BYPASS No
7.282926 -001 BYPASS_MANUAL_TURN_OFF No
7.282977 -001 INVERTER_BLEEDING_DC_LINK_VOLT No
7.283009 -001 CPU_ISR_ERROR No
7.283059 -001 SYSTEM_ISR_RESTART No
7.283116 -001 PARALLEL_DC No
7.283161 -001 BATTERY_NEEDS_SERVICE No
7.283204 -001 BATTERY_CHARGING No
7.283270 -001 BATTERY_NOT_CHARGED No
7.283312 -001 DISABLED_BATTERY_TIME No
7.283363 -001 SERIES_7000_ENABLE No
7.283401 -001 OTHER_UPS_ON No
7.283461 -001 PARALLEL_INVERTER No
7.283518 -001 UPS_IN_PARALLEL No
7.283557 -001 OUTPUT_BREAKER_REALY_FAIL No
7.283615 -001 CONTROL_POWER_OFF No
7.283647 -001 LEVEL_2_OVERLOAD_PHASE_A No
7.283698 -001 LEVEL_2_OVERLOAD_PHASE_B No
7.283752 -001 LEVEL_2_OVERLOAD_PHASE_C No
7.283793 -001 LEVEL_3_OVERLOAD_PHASE_A No
7.283845 -001 LEVEL_3_OVERLOAD_PHASE_B No
7.283885 -001 LEVEL_3_OVERLOAD_PHASE_C No
7.283940 -001 LEVEL_4_OVERLOAD_PHASE_A No
7.283998 -001 LEVEL_4_OVERLOAD_PHASE_B No
7.284037 -001 LEVEL_4_OVERLOAD_PHASE_C No
7.284097 0011 UPS_ON_BATTERY Yes
7.284129 -001 UPS_ON_BYPASS No
7.284184 0012 LOAD_DUMPED Yes
7.284239 -001 LOAD_ON_INVERTER No
7.284279 -001 UPS_ON_COMMAND No
7.284342 -001 UPS_OFF_COMMAND No
7.284398 -001 LOW_BATTERY_SHUTDOWN No
7.284437 -001 AUTO_ON_ENABLED No
7.284495 -001 SOFTWARE_INCOMPABILITY_DETECTED No
7.284527 -001 INVERTER_TEMP_SENSOR_FAILED No
7.284578 -001 DC_START_OCCURED No
7.284633 -001 IN_PARALLEL_OPERATION No
7.284696 -001 SYNCING_TO_BYPASS No
7.284728 -001 RAMPING_UPS_UP No
7.284747 -001 INVERTER_ON_DELAY No
7.284766 -001 CHARGER_ON_DELAY No
7.284786 -001 WAITING_FOR_UTIL_INPUT No
7.284805 -001 CLOSE_BYPASS_BREAKER No
7.284824 -001 TEMPORARY_BYPASS_OPERATION No
7.284844 -001 SYNCING_TO_OUTPUT No
7.284863 -001 BYPASS_FAILURE No
7.284883 -001 AUTO_OFF_COMMAND_EXECUTED No
7.284902 -001 AUTO_ON_COMMAND_EXECUTED No
7.284921 0013 BATTERY_TEST_FAILED Yes
7.284941 -001 FUSE_FAIL No
7.284959 0014 FAN_FAIL Yes
7.284978 -001 SITE_WIRING_FAULT No
7.284997 -001 BACKFEED_CONTACTOR_FAIL No
7.285016 -001 ON_BUCK No
7.285035 -001 ON_BOOST No
7.285054 -001 ON_DOUBLE_BOOST No
7.350243 -001 BATTERIES_DISCONNECTED No
7.350282 -001 UPS_CABINET_OVER_TEMP No
7.350329 -001 TRANSFORMER_OVER_TEMP No
7.350372 -001 AMBIENT_UNDER_TEMP No
7.350429 0015 AMBIENT_OVER_TEMP Yes
7.350467 -001 CABINET_DOOR_OPEN No
7.350532 -001 CABINET_DOOR_OPEN_VOLT_PRESENT No
7.350588 -001 AUTO_SHUTDOWN_PENDING No
7.350633 -001 TAP_SWITCHING_REALY_PENDING No
7.350677 -001 UNABLE_TO_CHARGE_BATTERIES No
7.350744 -001 STARTUP_FAILURE_CHECK_EPO No
7.350789 -001 AUTOMATIC_STARTUP_PENDING No
7.350839 -001 MODEM_FAILED No
7.350879 -001 INCOMING_MODEM_CALL_STARTED No
7.350936 -001 OUTGOING_MODEM_CALL_STARTED No
7.350992 -001 MODEM_CONNECTION_ESTABLISHED No
7.351035 -001 MODEM_CALL_COMPLETED_SUCCESS No
7.351096
7.351126 Length of Config_block: 80
7.351180 Length of statistics map: 0
7.351234 Length of command list: 26
7.351274 Length of outlet_block: 14
7.351329 Length of alarm_block: 16
8.366993 entering get_answer(41)
8.367115 get_answer: (19 bytes) => ab 11 0e 81 02 06 01 01 ff ff 00
00 02 01 ff ff
8.367188 01 00 ab
8.367219 get_answer: block_number = 11
8.367251 get_answer: data length = 14
8.367294 get_answer: sequence number (1) is ok
8.367325 get_answer: checksum is ok
8.367373 get_answer: all data received
8.367402 get_answer: exiting (len=14)
8.367457 init_outlet(14), res=14
8.367489 Number of outlets: 2
8.367540 Number of bytes: 6
8.367575 Outlet number: 1
8.367643 send_to_all: SETINFO outlet.1.id "1"
8.367676 Outlet state: 1
8.367731 send_to_all: SETINFO outlet.1.status "On"
8.367762 Auto delay off: -1
8.367818 send_to_all: SETINFO outlet.1.delay.shutdown "-1"
8.367848 Auto delay on: 0
8.367904 send_to_all: SETINFO outlet.1.delay.start "0"
8.367939 Outlet number: 2
8.367993 send_to_all: SETINFO outlet.2.id "2"
8.368026 Outlet state: 1
8.368080 send_to_all: SETINFO outlet.2.status "On"
8.368113 Auto delay off: -1
8.368169 send_to_all: SETINFO outlet.2.delay.shutdown "-1"
8.368199 Auto delay on: 1
8.368254 send_to_all: SETINFO outlet.2.delay.start "1"
8.368298 send_to_all: ADDCMD outlet.1.shutdown.return
8.368339 send_to_all: ADDCMD outlet.2.shutdown.return
9.387018 entering get_answer(36)
14.386974 get_answer: exiting (len=0)
15.407145 entering get_answer(36)
15.407271 get_answer: (85 bytes) => ab 06 50 81 23 01 ce c7 00 17 f4
01 78 00 3c 00
15.407393 00 00 00 33 ba 00 00 00 00 00 17 0d a3 00 01 00 00 00 04
08 00 00 00 00 20
15.407494 01 02 01 00 00 00 00 00 00 00 1f 31 30 33 30 30 33 32 36
39 2d 36 35 39 31
15.407577 20 20 47 45 31 36 31 41 31 30 37 36 00 00 20 20 20 20 44
15.407629 get_answer: block_number = 6
15.407660 get_answer: data length = 80
15.407694 get_answer: sequence number (1) is ok
15.407734 get_answer: checksum is ok
15.407763 get_answer: all data received
15.407814 get_answer: exiting (len=80)
15.407862 send_to_all: SETINFO output.voltage.nominal "120"
15.407919 send_to_all: SETINFO ups.serial "GE161A1076"
16.427176 entering get_answer(3c)
16.427274 get_answer: (36 bytes) => ab 0c 1f 81 78 00 3c 00 0a 00 43
30 f4 01 6c 00
16.427366 7f 00 00 00 02 01 65 00 8b 00 00 00 00 00 4b 01 01 00 00
58
16.427405 get_answer: block_number = c
16.427428 get_answer: data length = 31
16.427450 get_answer: sequence number (1) is ok
16.427486 get_answer: checksum is ok
16.427508 get_answer: all data received
16.427546 get_answer: exiting (len=31)
16.427580 send_to_all: SETINFO input.voltage.nominal "120"
16.427625 send_to_all: SETINFO input.frequency.nominal "60"
16.427679 send_to_all: SETINFO input.frequency.low "55"
16.427711 send_to_all: SETINFO input.frequency.high "65"
16.427755 send_to_all: SETINFO input.transfer.boost.high "108"
16.427786 send_to_all: SETINFO input.transfer.trim.low "127"
16.427826 send_to_all: SETINFO ups.beeper.status "enabled"
16.427868 send_to_all: SETINFO input.transfer.low "101"
16.427951 send_to_all: SETINFO input.transfer.high "139"
16.427978 send_to_all: SETINFO ambient.temperature.high "75"
16.428020 entering init_command_map()
17.447142 entering get_answer(40)
17.447219 get_answer: (31 bytes) => ab 10 1a 81 18 01 31 33 34 35 36
3b 3c 3f 40 41
17.447305 42 43 89 8a 8b 91 93 95 97 98 a0 b1 b2 cf 7a
17.447329 get_answer: block_number = 10
17.447367 get_answer: data length = 26
17.447388 get_answer: sequence number (1) is ok
17.447428 get_answer: checksum is ok
17.447446 get_answer: all data received
17.447472 get_answer: exiting (len=26)
17.447501 Command list block supported.
17.447531 send_to_all: ADDCMD shutdown.return
17.447575 send_to_all: ADDCMD shutdown.stayoff
17.447619 send_to_all: ADDCMD test.battery.start
18.467215 entering get_answer(34)
18.467331 get_answer: (61 bytes) => ab 04 38 81 00 00 00 00 03 00 00
00 00 00 70 42
18.467464 00 00 70 42 00 30 cf 41 5e 00 00 00 aa 1b 00 00 77 00 00
00 00 00 00 00 27
18.467555 00 00 00 00 00 00 00 45 eb d9 40 ee 02 00 00 77 00 00 00
80
18.467607 get_answer: block_number = 4
18.467637 get_answer: data length = 56
18.467671 get_answer: sequence number (1) is ok
18.467712 get_answer: checksum is ok
18.467741 get_answer: all data received
18.467791 get_answer: exiting (len=56)
18.467842 send_to_all: SETINFO ups.power "3"
18.467950 send_to_all: SETINFO output.frequency "60.00"
18.468009 send_to_all: SETINFO input.frequency "60.00"
18.468072 send_to_all: SETINFO battery.voltage "25.90"
18.468141 send_to_all: SETINFO battery.charge "94"
18.468191 send_to_all: SETINFO battery.runtime "7082"
18.468237 send_to_all: SETINFO input.voltage "119"
18.468308 send_to_all: SETINFO ambient.temperature "39"
18.468360 send_to_all: SETINFO output.current " 0.0"
18.468412 send_to_all: SETINFO output.current.nominal " 6.8"
18.468477 send_to_all: SETINFO output.voltage "119"
18.468614 send_to_all: SETINFO ups.load " 0.4"
19.487221 entering get_answer(41)
19.487326 get_answer: (19 bytes) => ab 11 0e 81 02 06 01 01 ff ff 00
00 02 01 ff ff
19.487405 01 00 ab
19.487435 get_answer: block_number = 11
19.487466 get_answer: data length = 14
19.487510 get_answer: sequence number (1) is ok
19.487552 get_answer: checksum is ok
19.487592 get_answer: all data received
19.487623 get_answer: exiting (len=14)
19.487673 init_outlet(14), res=14
19.487702 Number of outlets: 2
19.487755 Number of bytes: 6
19.487788 Outlet number: 1
19.487849 Outlet state: 1
19.487890 Auto delay off: -1
19.487940 Auto delay on: 0
19.487983 Outlet number: 2
19.488023 Outlet state: 1
19.488067 Auto delay off: -1
19.488107 Auto delay on: 1
20.507226 entering get_answer(35)
25.507211 get_answer: exiting (len=0)
26.527375 entering get_answer(35)
26.527478 get_answer: (21 bytes) => ab 05 10 81 00 00 00 00 00 00 00
00 00 00 00 00
26.527562 00 00 00 00 bf
26.527593 get_answer: block_number = 5
26.527624 get_answer: data length = 16
26.527666 get_answer: sequence number (1) is ok
26.527699 get_answer: checksum is ok
26.527750 get_answer: all data received
26.527788 get_answer: exiting (len=16)
27.547392 entering get_answer(33)
27.547492 get_answer: (9 bytes) => ab 03 04 81 50 82 00 00 fb
27.547575 get_answer: block_number = 3
27.547618 get_answer: data length = 4
27.547674 get_answer: sequence number (1) is ok
27.547712 get_answer: checksum is ok
27.547760 get_answer: all data received
27.547811 get_answer: exiting (len=4)
27.547880 send_to_all: SETINFO ups.status "OL"
27.547925 send_to_all: DATAOK
27.548478 dstate_init: sock /var/db/nut/bcmxcp_usb-eaton open on fd 6
27.548529 send_to_all: SETINFO driver.parameter.pollinterval "2"
27.548574 send_to_all: SETINFO device.mfr "Eaton"
27.548661 send_to_all: SETINFO device.model "PW5115 RM 750i"
27.548736 send_to_all: SETINFO device.serial "GE161A1076"
28.567418 entering get_answer(34)
33.567384 get_answer: exiting (len=0)
34.587548 entering get_answer(34)
34.587667 get_answer: (61 bytes) => ab 04 38 81 00 00 00 00 03 00 00
00 00 00 70 42
34.587800 00 00 70 42 00 30 cf 41 5e 00 00 00 aa 1b 00 00 76 00 00
00 00 00 00 00 27
34.587890 00 00 00 00 00 00 00 45 eb d9 40 ee 02 00 00 76 00 00 00
82
34.587931 get_answer: block_number = 4
34.587973 get_answer: data length = 56
34.588032 get_answer: sequence number (1) is ok
34.588086 get_answer: checksum is ok
34.588154 get_answer: all data received
34.588188 get_answer: exiting (len=56)
34.588321 send_to_all: SETINFO input.voltage "118"
34.588414 send_to_all: SETINFO output.voltage "118"
35.607550 entering get_answer(41)
35.607668 get_answer: (19 bytes) => ab 11 0e 81 02 06 01 01 ff ff 00
00 02 01 ff ff
35.607733 01 00 ab
35.607763 get_answer: block_number = 11
35.607794 get_answer: data length = 14
35.607837 get_answer: sequence number (1) is ok
35.607866 get_answer: checksum is ok
35.607915 get_answer: all data received
35.607944 get_answer: exiting (len=14)
35.607998 init_outlet(14), res=14
35.608038 Number of outlets: 2
35.608088 Number of bytes: 6
35.608130 Outlet number: 1
35.608180 Outlet state: 1
35.608221 Auto delay off: -1
35.608261 Auto delay on: 0
35.608302 Outlet number: 2
35.608343 Outlet state: 1
35.608380 Auto delay off: -1
35.608431 Auto delay on: 1
36.627586 entering get_answer(35)
36.627703 get_answer: (21 bytes) => ab 05 10 81 00 00 00 00 00 00 00
00 00 00 00 00
36.627787 00 00 00 00 bf
36.627821 get_answer: block_number = 5
36.627871 get_answer: data length = 16
36.627912 get_answer: sequence number (1) is ok
36.627951 get_answer: checksum is ok
36.628011 get_answer: all data received
36.628049 get_answer: exiting (len=16)
37.647608 entering get_answer(33)
37.647700 get_answer: (9 bytes) => ab 03 04 81 50 82 00 00 fb
37.647736 get_answer: block_number = 3
37.647805 get_answer: data length = 4
37.647839 get_answer: sequence number (1) is ok
37.647889 get_answer: checksum is ok
37.647921 get_answer: all data received
37.647971 get_answer: exiting (len=4)
38.667646 entering get_answer(34)
43.667606 get_answer: exiting (len=0)
44.687771 entering get_answer(34)
44.687891 get_answer: (61 bytes) => ab 04 38 81 00 00 00 00 03 00 00
00 00 00 70 42
44.688011 00 00 70 42 00 30 cf 41 5e 00 00 00 aa 1b 00 00 77 00 00
00 00 00 00 00 27
44.688094 00 00 00 00 00 00 00 45 eb d9 40 ee 02 00 00 77 00 00 00
80
44.688145 get_answer: block_number = 4
44.688178 get_answer: data length = 56
44.688208 get_answer: sequence number (1) is ok
44.688249 get_answer: checksum is ok
44.688280 get_answer: all data received
44.688331 get_answer: exiting (len=56)
44.688439 send_to_all: SETINFO input.voltage "119"
44.688540 send_to_all: SETINFO output.voltage "119"
45.707952 entering get_answer(41)
45.708058 get_answer: (19 bytes) => ab 11 0e 81 02 06 01 01 ff ff 00
00 02 01 ff ff
45.708139 01 00 ab
45.708170 get_answer: block_number = 11
45.708199 get_answer: data length = 14
45.708250 get_answer: sequence number (1) is ok
45.708283 get_answer: checksum is ok
45.708334 get_answer: all data received
45.708371 get_answer: exiting (len=14)
45.708421 init_outlet(14), res=14
45.708453 Number of outlets: 2
45.708504 Number of bytes: 6
45.708535 Outlet number: 1
45.708594 Outlet state: 1
45.708634 Auto delay off: -1
45.708675 Auto delay on: 0
45.708717 Outlet number: 2
45.708757 Outlet state: 1
45.708794 Auto delay off: -1
45.708845 Auto delay on: 1
46.727821 entering get_answer(35)
46.727930 get_answer: (21 bytes) => ab 05 10 81 00 00 00 00 00 00 00
00 00 00 00 00
46.728015 00 00 00 00 bf
46.728047 get_answer: block_number = 5
46.728079 get_answer: data length = 16
46.728122 get_answer: sequence number (1) is ok
46.728163 get_answer: checksum is ok
46.728203 get_answer: all data received
46.728236 get_answer: exiting (len=16)
47.747829 entering get_answer(33)
52.747797 get_answer: exiting (len=0)
53.767949 entering get_answer(33)
53.768051 get_answer: (9 bytes) => ab 03 04 81 50 82 00 00 fb
53.768129 get_answer: block_number = 3
53.768167 get_answer: data length = 4
53.768202 get_answer: sequence number (1) is ok
53.768243 get_answer: checksum is ok
53.768282 get_answer: all data received
53.768323 get_answer: exiting (len=4)
54.787980 entering get_answer(34)
54.788097 get_answer: (61 bytes) => ab 04 38 81 00 00 00 00 03 00 00
00 00 00 70 42
54.788226 00 00 70 42 00 30 cf 41 5e 00 00 00 aa 1b 00 00 77 00 00
00 00 00 00 00 27
54.788310 00 00 00 00 00 00 00 45 eb d9 40 ee 02 00 00 77 00 00 00
80
54.788361 get_answer: block_number = 4
54.788392 get_answer: data length = 56
54.788424 get_answer: sequence number (1) is ok
54.788464 get_answer: checksum is ok
54.788493 get_answer: all data received
54.788544 get_answer: exiting (len=56)
55.807998 entering get_answer(41)
55.808106 get_answer: (19 bytes) => ab 11 0e 81 02 06 01 01 ff ff 00
00 02 01 ff ff
55.808185 01 00 ab
55.808216 get_answer: block_number = 11
55.808249 get_answer: data length = 14
55.808293 get_answer: sequence number (1) is ok
55.808323 get_answer: checksum is ok
55.808372 get_answer: all data received
55.808404 get_answer: exiting (len=14)
55.808459 init_outlet(14), res=14
55.808488 Number of outlets: 2
55.808541 Number of bytes: 6
55.808574 Outlet number: 1
55.808635 Outlet state: 1
55.808683 Auto delay off: -1
55.808726 Auto delay on: 0
55.808771 Outlet number: 2
55.808810 Outlet state: 1
55.808853 Auto delay off: -1
55.808894 Auto delay on: 1
56.828022 entering get_answer(35)
56.828130 get_answer: (21 bytes) => ab 05 10 81 00 00 00 00 00 00 00
00 00 00 00 00
56.828212 00 00 00 00 bf
56.828243 get_answer: block_number = 5
56.828273 get_answer: data length = 16
56.828317 get_answer: sequence number (1) is ok
56.828349 get_answer: checksum is ok
56.828397 get_answer: all data received
56.828427 get_answer: exiting (len=16)
57.848051 entering get_answer(33)
62.848015 get_answer: exiting (len=0)
63.868182 entering get_answer(33)
63.868284 get_answer: (9 bytes) => ab 03 04 81 50 82 00 00 fb
63.868363 get_answer: block_number = 3
63.868405 get_answer: data length = 4
63.868462 get_answer: sequence number (1) is ok
63.868499 get_answer: checksum is ok
63.868539 get_answer: all data received
63.868578 get_answer: exiting (len=4)
64.888188 entering get_answer(34)
64.888305 get_answer: (61 bytes) => ab 04 38 81 00 00 00 00 03 00 00
00 00 00 70 42
64.888423 00 00 70 42 00 30 cf 41 5e 00 00 00 aa 1b 00 00 77 00 00
00 00 00 00 00 27
64.888504 00 00 00 00 00 00 00 45 eb d9 40 ee 02 00 00 77 00 00 00
80
64.888554 get_answer: block_number = 4
64.888587 get_answer: data length = 56
64.888622 get_answer: sequence number (1) is ok
64.888662 get_answer: checksum is ok
64.888700 get_answer: all data received
64.888741 get_answer: exiting (len=56)
65.908228 entering get_answer(41)
65.908345 get_answer: (19 bytes) => ab 11 0e 81 02 06 01 01 ff ff 00
00 02 01 ff ff
65.908416 01 00 ab
65.908447 get_answer: block_number = 11
65.908476 get_answer: data length = 14
65.908520 get_answer: sequence number (1) is ok
65.908560 get_answer: checksum is ok
65.908599 get_answer: all data received
65.908632 get_answer: exiting (len=14)
65.908682 init_outlet(14), res=14
65.908710 Number of outlets: 2
65.908763 Number of bytes: 6
65.908795 Outlet number: 1
65.908856 Outlet state: 1
65.908898 Auto delay off: -1
65.908949 Auto delay on: 0
65.908986 Outlet number: 2
65.909036 Outlet state: 1
65.909079 Auto delay off: -1
65.909120 Auto delay on: 1
66.928268 entering get_answer(35)
71.928209 get_answer: exiting (len=0)
72.948351 entering get_answer(35)
72.948437 get_answer: (21 bytes) => ab 05 10 81 00 00 00 00 00 00 00
00 00 00 00 00
72.948471 00 00 00 00 bf
72.948512 get_answer: block_number = 5
72.948540 get_answer: data length = 16
72.948579 get_answer: sequence number (1) is ok
72.948600 get_answer: checksum is ok
72.948644 get_answer: all data received
72.948675 get_answer: exiting (len=16)
73.968410 entering get_answer(33)
73.968510 get_answer: (9 bytes) => ab 03 04 81 50 82 00 00 fb
73.968545 get_answer: block_number = 3
73.968616 get_answer: data length = 4
73.968652 get_answer: sequence number (1) is ok
73.968701 get_answer: checksum is ok
73.968743 get_answer: all data received
73.968785 get_answer: exiting (len=4)
74.988416 entering get_answer(34)
74.988520 get_answer: (61 bytes) => ab 04 38 81 00 00 00 00 03 00 00
00 00 00 70 42
74.988656 00 00 70 42 00 30 cf 41 5e 00 00 00 aa 1b 00 00 77 00 00
00 00 00 00 00 27
74.988737 00 00 00 00 00 00 00 45 eb d9 40 ee 02 00 00 77 00 00 00
80
74.988787 get_answer: block_number = 4
74.988822 get_answer: data length = 56
74.988851 get_answer: sequence number (1) is ok
74.988892 get_answer: checksum is ok
74.988923 get_answer: all data received
74.988974 get_answer: exiting (len=56)
76.008441 entering get_answer(41)
76.008552 get_answer: (19 bytes) => ab 11 0e 81 02 06 01 01 ff ff 00
00 02 01 ff ff
76.008635 01 00 ab
76.008677 get_answer: block_number = 11
76.008736 get_answer: data length = 14
76.008791 get_answer: sequence number (1) is ok
76.008828 get_answer: checksum is ok
76.008868 get_answer: all data received
76.008906 get_answer: exiting (len=14)
76.008955 init_outlet(14), res=14
76.008985 Number of outlets: 2
76.009026 Number of bytes: 6
76.009065 Outlet number: 1
76.009123 Outlet state: 1
76.009185 Auto delay off: -1
76.009264 Auto delay on: 0
76.009319 Outlet number: 2
76.009391 Outlet state: 1
76.009450 Auto delay off: -1
76.009495 Auto delay on: 1
77.028468 entering get_answer(35)
82.028428 get_answer: exiting (len=0)
83.048593 entering get_answer(35)
83.048704 get_answer: (21 bytes) => ab 05 10 81 00 00 00 00 00 00 00
00 00 00 00 00
83.048803 00 00 00 00 bf
83.048833 get_answer: block_number = 5
83.048884 get_answer: data length = 16
83.048923 get_answer: sequence number (1) is ok
83.048961 get_answer: checksum is ok
83.049021 get_answer: all data received
83.049068 get_answer: exiting (len=16)
84.068596 entering get_answer(33)
84.068698 get_answer: (9 bytes) => ab 03 04 81 50 82 00 00 fb
84.068769 get_answer: block_number = 3
84.068802 get_answer: data length = 4
84.068832 get_answer: sequence number (1) is ok
84.068883 get_answer: checksum is ok
84.068914 get_answer: all data received
84.068965 get_answer: exiting (len=4)
85.088622 entering get_answer(34)
85.088727 get_answer: (61 bytes) => ab 04 38 81 00 00 00 00 03 00 00
00 00 00 70 42
85.088859 00 00 70 42 00 30 cf 41 5e 00 00 00 aa 1b 00 00 77 00 00
00 00 00 00 00 27
85.088948 00 00 00 00 00 00 00 45 eb d9 40 ee 02 00 00 77 00 00 00
80
85.088998 get_answer: block_number = 4
85.089032 get_answer: data length = 56
85.089066 get_answer: sequence number (1) is ok
85.089106 get_answer: checksum is ok
85.089148 get_answer: all data received
85.089190 get_answer: exiting (len=56)
86.108652 entering get_answer(41)
86.108768 get_answer: (19 bytes) => ab 11 0e 81 02 06 01 01 ff ff 00
00 02 01 ff ff
86.108847 01 00 ab
86.108877 get_answer: block_number = 11
86.108929 get_answer: data length = 14
86.108968 get_answer: sequence number (1) is ok
86.109014 get_answer: checksum is ok
86.109042 get_answer: all data received
86.109091 get_answer: exiting (len=14)
86.109123 init_outlet(14), res=14
86.109152 Number of outlets: 2
86.109193 Number of bytes: 6
86.109222 Outlet number: 1
86.109280 Outlet state: 1
86.109322 Auto delay off: -1
86.109372 Auto delay on: 0
86.109414 Outlet number: 2
86.109455 Outlet state: 1
86.109498 Auto delay off: -1
86.109538 Auto delay on: 1
87.128658 entering get_answer(35)
92.128644 get_answer: exiting (len=0)
93.148812 entering get_answer(35)
93.148919 get_answer: (21 bytes) => ab 05 10 81 00 00 00 00 00 00 00
00 00 00 00 00
93.149006 00 00 00 00 bf
93.149042 get_answer: block_number = 5
93.149095 get_answer: data length = 16
93.149134 get_answer: sequence number (1) is ok
93.149182 get_answer: checksum is ok
93.149227 get_answer: all data received
93.149269 get_answer: exiting (len=16)
94.168819 entering get_answer(33)
94.168919 get_answer: (9 bytes) => ab 03 04 81 50 82 00 00 fb
94.168991 get_answer: block_number = 3
94.169033 get_answer: data length = 4
94.169088 get_answer: sequence number (1) is ok
94.169149 get_answer: checksum is ok
94.169188 get_answer: all data received
94.169229 get_answer: exiting (len=4)
95.188841 entering get_answer(34)
95.188948 get_answer: (61 bytes) => ab 04 38 81 00 00 00 00 03 00 00
00 00 00 70 42
95.189090 00 00 70 42 00 30 cf 41 5e 00 00 00 aa 1b 00 00 77 00 00
00 00 00 00 00 27
95.189168 00 00 00 00 00 00 00 45 eb d9 40 ee 02 00 00 77 00 00 00
80
95.189220 get_answer: block_number = 4
95.189250 get_answer: data length = 56
95.189285 get_answer: sequence number (1) is ok
95.189325 get_answer: checksum is ok
95.189357 get_answer: all data received
95.189407 get_answer: exiting (len=56)
96.208868 entering get_answer(41)
96.208973 get_answer: (19 bytes) => ab 11 0e 81 02 06 01 01 ff ff 00
00 02 01 ff ff
96.209056 01 00 ab
96.209087 get_answer: block_number = 11
96.209118 get_answer: data length = 14
96.209162 get_answer: sequence number (1) is ok
96.209193 get_answer: checksum is ok
96.209242 get_answer: all data received
96.209273 get_answer: exiting (len=14)
96.209332 init_outlet(14), res=14
96.209366 Number of outlets: 2
96.209416 Number of bytes: 6
96.209448 Outlet number: 1
96.209507 Outlet state: 1
96.209547 Auto delay off: -1
96.209588 Auto delay on: 0
96.209631 Outlet number: 2
96.209670 Outlet state: 1
96.209707 Auto delay off: -1
96.209757 Auto delay on: 1
97.228894 entering get_answer(35)
97.229002 get_answer: (21 bytes) => ab 05 10 81 00 00 00 00 00 00 00
00 00 00 00 00
97.229084 00 00 00 00 bf
97.229115 get_answer: block_number = 5
97.229147 get_answer: data length = 16
97.229192 get_answer: sequence number (1) is ok
97.229231 get_answer: checksum is ok
97.229271 get_answer: all data received
97.229306 get_answer: exiting (len=16)
98.248902 entering get_answer(33)
98.249005 get_answer: (9 bytes) => ab 03 04 81 50 82 00 00 fb
98.249097 get_answer: block_number = 3
98.249128 get_answer: data length = 4
98.249180 get_answer: sequence number (1) is ok
98.249221 get_answer: checksum is ok
98.249262 get_answer: all data received
98.249323 get_answer: exiting (len=4)
99.268948 entering get_answer(34)
104.268907 get_answer: exiting (len=0)
105.289072 entering get_answer(34)
105.289178 get_answer: (61 bytes) => ab 04 38 81 00 00 00 00 03 00 00
00 00 00 70 42
105.289320 00 00 70 42 00 30 cf 41 5e 00 00 00 aa 1b 00 00 79 00 00
00 00 00 00 00 27
105.289411 00 00 00 00 00 00 00 45 eb d9 40 ee 02 00 00 79 00 00 00
7c
105.289461 get_answer: block_number = 4
105.289491 get_answer: data length = 56
105.289543 get_answer: sequence number (1) is ok
105.289584 get_answer: checksum is ok
105.289622 get_answer: all data received
105.289660 get_answer: exiting (len=56)
105.289799 send_to_all: SETINFO input.voltage "121"
105.289902 send_to_all: SETINFO output.voltage "121"
106.309096 entering get_answer(41)
111.309060 get_answer: exiting (len=0)
112.329225 entering get_answer(41)
112.329333 get_answer: (19 bytes) => ab 11 0e 81 02 06 01 01 ff ff 00
00 02 01 ff ff
112.329412 01 00 ab
112.329456 get_answer: block_number = 11
112.329507 get_answer: data length = 14
112.329579 get_answer: sequence number (1) is ok
112.329631 get_answer: checksum is ok
112.329673 get_answer: all data received
112.329714 get_answer: exiting (len=14)
112.329753 init_outlet(14), res=14
112.329793 Number of outlets: 2
112.329835 Number of bytes: 6
112.329876 Outlet number: 1
112.329926 Outlet state: 1
112.329966 Auto delay off: -1
112.330049 Auto delay on: 0
112.330116 Outlet number: 2
112.330181 Outlet state: 1
112.330245 Auto delay off: -1
112.330302 Auto delay on: 1
113.349241 entering get_answer(35)
113.349351 get_answer: (21 bytes) => ab 05 10 81 00 00 00 00 00 00 00
00 00 00 00 00
113.349437 00 00 00 00 bf
113.349467 get_answer: block_number = 5
113.349497 get_answer: data length = 16
113.349541 get_answer: sequence number (1) is ok
113.349582 get_answer: checksum is ok
113.349622 get_answer: all data received
113.349657 get_answer: exiting (len=16)
114.369257 entering get_answer(33)
119.369227 get_answer: exiting (len=0)
120.389398 entering get_answer(33)
120.389504 get_answer: (9 bytes) => ab 03 04 81 50 82 00 00 fb
120.389581 get_answer: block_number = 3
120.389615 get_answer: data length = 4
120.389644 get_answer: sequence number (1) is ok
120.389694 get_answer: checksum is ok
120.389736 get_answer: all data received
120.389778 get_answer: exiting (len=4)
121.409404 entering get_answer(34)
121.409508 get_answer: (61 bytes) => ab 04 38 81 00 00 00 00 03 00 00
00 00 00 70 42
121.409641 00 00 70 42 00 30 cf 41 5e 00 00 00 aa 1b 00 00 77 00 00
00 00 00 00 00 27
121.409725 00 00 00 00 00 00 00 45 eb d9 40 ee 02 00 00 77 00 00 00
80
121.409775 get_answer: block_number = 4
121.409808 get_answer: data length = 56
121.409840 get_answer: sequence number (1) is ok
121.409880 get_answer: checksum is ok
121.409920 get_answer: all data received
121.409960 get_answer: exiting (len=56)
121.410070 send_to_all: SETINFO input.voltage "119"
121.410167 send_to_all: SETINFO output.voltage "119"
122.429439 entering get_answer(41)
122.429546 get_answer: (19 bytes) => ab 11 0e 81 02 06 01 01 ff ff 00
00 02 01 ff ff
122.429631 01 00 ab
122.429662 get_answer: block_number = 11
122.429697 get_answer: data length = 14
122.429740 get_answer: sequence number (1) is ok
122.429770 get_answer: checksum is ok
122.429818 get_answer: all data received
122.429848 get_answer: exiting (len=14)
122.429904 init_outlet(14), res=14
122.429938 Number of outlets: 2
122.429990 Number of bytes: 6
122.430023 Outlet number: 1
122.430082 Outlet state: 1
122.430122 Auto delay off: -1
122.430173 Auto delay on: 0
122.430219 Outlet number: 2
122.430259 Outlet state: 1
122.430296 Auto delay off: -1
122.430345 Auto delay on: 1
123.449465 entering get_answer(35)
123.449570 get_answer: (21 bytes) => ab 05 10 81 00 00 00 00 00 00 00
00 00 00 00 00
123.449655 00 00 00 00 bf
123.449685 get_answer: block_number = 5
123.449740 get_answer: data length = 16
123.449773 get_answer: sequence number (1) is ok
123.449825 get_answer: checksum is ok
123.449858 get_answer: all data received
123.449909 get_answer: exiting (len=16)
124.469479 entering get_answer(33)
129.469448 get_answer: exiting (len=0)
130.489612 entering get_answer(33)
130.489715 get_answer: (9 bytes) => ab 03 04 81 50 82 00 00 fb
130.489789 get_answer: block_number = 3
130.489823 get_answer: data length = 4
130.489855 get_answer: sequence number (1) is ok
130.489905 get_answer: checksum is ok
130.489937 get_answer: all data received
130.489988 get_answer: exiting (len=4)
131.509622 entering get_answer(34)
131.509740 get_answer: (61 bytes) => ab 04 38 81 00 00 00 00 03 00 00
00 00 00 70 42
131.509871 00 00 70 42 00 30 cf 41 5e 00 00 00 aa 1b 00 00 77 00 00
00 00 00 00 00 27
131.509964 00 00 00 00 00 00 00 45 eb d9 40 ee 02 00 00 77 00 00 00
80
131.509997 get_answer: block_number = 4
131.510041 get_answer: data length = 56
131.510098 get_answer: sequence number (1) is ok
131.510151 get_answer: checksum is ok
131.510188 get_answer: all data received
131.510229 get_answer: exiting (len=56)
132.529653 entering get_answer(41)
132.529762 get_answer: (19 bytes) => ab 11 0e 81 02 06 01 01 ff ff 00
00 02 01 ff ff
132.529842 01 00 ab
132.529880 get_answer: block_number = 11
132.529909 get_answer: data length = 14
132.529952 get_answer: sequence number (1) is ok
132.529980 get_answer: checksum is ok
132.530029 get_answer: all data received
132.530058 get_answer: exiting (len=14)
132.530116 init_outlet(14), res=14
132.530147 Number of outlets: 2
132.530198 Number of bytes: 6
132.530230 Outlet number: 1
132.530287 Outlet state: 1
132.530327 Auto delay off: -1
132.530369 Auto delay on: 0
132.530410 Outlet number: 2
132.530449 Outlet state: 1
132.530492 Auto delay off: -1
132.530534 Auto delay on: 1
133.549667 entering get_answer(35)
133.549774 get_answer: (21 bytes) => ab 05 10 81 00 00 00 00 00 00 00
00 00 00 00 00
133.549872 00 00 00 00 bf
133.549933 get_answer: block_number = 5
133.549973 get_answer: data length = 16
133.550035 get_answer: sequence number (1) is ok
133.550086 get_answer: checksum is ok
133.550128 get_answer: all data received
133.550177 get_answer: exiting (len=16)
134.569692 entering get_answer(33)
134.569794 get_answer: (9 bytes) => ab 03 04 81 50 82 00 00 fb
134.569870 get_answer: block_number = 3
134.569907 get_answer: data length = 4
134.569940 get_answer: sequence number (1) is ok
134.569980 get_answer: checksum is ok
134.570009 get_answer: all data received
134.570059 get_answer: exiting (len=4)
135.589697 entering get_answer(34)
135.589799 get_answer: (61 bytes) => ab 04 38 81 00 00 00 00 03 00 00
00 00 00 70 42
135.589927 00 00 70 42 00 30 cf 41 5e 00 00 00 aa 1b 00 00 77 00 00
00 00 00 00 00 27
135.590018 00 00 00 00 00 00 00 45 eb d9 40 ee 02 00 00 77 00 00 00
80
135.590070 get_answer: block_number = 4
135.590102 get_answer: data length = 56
135.590133 get_answer: sequence number (1) is ok
135.590174 get_answer: checksum is ok
135.590203 get_answer: all data received
135.590255 get_answer: exiting (len=56)
136.609738 entering get_answer(41)
141.609709 get_answer: exiting (len=0)
142.629873 entering get_answer(41)
142.629993 get_answer: (19 bytes) => ab 11 0e 81 02 06 01 01 ff ff 00
00 02 01 ff ff
142.630071 01 00 ab
142.630101 get_answer: block_number = 11
142.630159 get_answer: data length = 14
142.630220 get_answer: sequence number (1) is ok
142.630262 get_answer: checksum is ok
142.630311 get_answer: all data received
142.630365 get_answer: exiting (len=14)
142.630408 init_outlet(14), res=14
142.630449 Number of outlets: 2
142.630491 Number of bytes: 6
142.630532 Outlet number: 1
142.630581 Outlet state: 1
142.630630 Auto delay off: -1
142.630691 Auto delay on: 0
142.630739 Outlet number: 2
142.630786 Outlet state: 1
142.630844 Auto delay off: -1
142.630919 Auto delay on: 1
143.649893 entering get_answer(35)
143.650016 get_answer: (21 bytes) => ab 05 10 81 00 00 00 00 00 00 00
00 00 00 00 00
143.650091 00 00 00 00 bf
143.650122 get_answer: block_number = 5
143.650175 get_answer: data length = 16
143.650206 get_answer: sequence number (1) is ok
143.650261 get_answer: checksum is ok
143.650301 get_answer: all data received
143.650344 get_answer: exiting (len=16)
144.669916 entering get_answer(33)
149.669881 get_answer: exiting (len=0)
150.690032 entering get_answer(33)
150.690134 get_answer: (9 bytes) => ab 03 04 81 50 82 00 00 fb
150.690203 get_answer: block_number = 3
150.690235 get_answer: data length = 4
150.690267 get_answer: sequence number (1) is ok
150.690317 get_answer: checksum is ok
150.690349 get_answer: all data received
150.690399 get_answer: exiting (len=4)
151.710103 entering get_answer(34)
151.710208 get_answer: (61 bytes) => ab 04 38 81 00 00 00 00 03 00 00
00 00 00 70 42
151.710337 00 00 70 42 00 30 cf 41 5e 00 00 00 aa 1b 00 00 77 00 00
00 00 00 00 00 27
151.710427 00 00 00 00 00 00 00 45 eb d9 40 ee 02 00 00 77 00 00 00
80
151.710477 get_answer: block_number = 4
151.710507 get_answer: data length = 56
151.710541 get_answer: sequence number (1) is ok
151.710582 get_answer: checksum is ok
151.710612 get_answer: all data received
151.710669 get_answer: exiting (len=56)
152.730089 entering get_answer(41)
157.730055 get_answer: exiting (len=0)
158.750225 entering get_answer(41)
158.750348 get_answer: (19 bytes) => ab 11 0e 81 02 06 01 01 ff ff 00
00 02 01 ff ff
158.750448 01 00 ab
158.750479 get_answer: block_number = 11
158.750539 get_answer: data length = 14
158.750591 get_answer: sequence number (1) is ok
158.750628 get_answer: checksum is ok
158.750677 get_answer: all data received
158.750717 get_answer: exiting (len=14)
158.750759 init_outlet(14), res=14
158.750822 Number of outlets: 2
158.750864 Number of bytes: 6
158.750906 Outlet number: 1
158.750956 Outlet state: 1
158.751007 Auto delay off: -1
158.751068 Auto delay on: 0
158.751142 Outlet number: 2
158.751200 Outlet state: 1
158.751246 Auto delay off: -1
158.751294 Auto delay on: 1
159.770238 entering get_answer(35)
164.770207 get_answer: exiting (len=0)
165.790371 entering get_answer(35)
165.790477 get_answer: (21 bytes) => ab 05 10 81 00 00 00 00 00 00 00
00 00 00 00 00
165.790577 00 00 00 00 bf
165.790611 get_answer: block_number = 5
165.790661 get_answer: data length = 16
165.790702 get_answer: sequence number (1) is ok
165.790740 get_answer: checksum is ok
165.790779 get_answer: all data received
165.790820 get_answer: exiting (len=16)
165.796290 entering get_answer(33)
^C 238.217710 get_answer: exiting (len=0)
239.231937 entering get_answer(33)
244.231916 get_answer: exiting (len=0)
244.236929 entering get_answer(33)
250.950973 get_answer: exiting (len=0)
251.962220 entering get_answer(33)
251.962302 get_answer: (1 bytes) => fb
251.962334 get_answer: wrong header
252.982281 entering get_answer(33)
253.833035 get_answer: exiting (len=0)
253.833070 send_to_all: DATASTALE
253.833091 Short read from UPS
253.833141 Signal 2: exiting
253.833266 CLOSING
#
--
Public Keys:
PGP KeyID = 0x5F22FDC1
GnuPG KeyID = 0x620836CF
