Hi,
I am struggling to get plain Cologne chip cards to run in NT mode, runs
nice in TE mode despite the error message:
login as: root
root at 192.168.2.22's password:
Last login: Tue Sep 1 23:09:24 2009 from 192.168.2.50
Welcome to Elastix
----------------------------------------------------
misdnportinfo
Port 1: TE-mode BRI S/T interface line (for phone lines)
-> Protocol: DSS1 (Euro ISDN)
-> Layer 4 protocol 0x04000001 is detected, but not allowed for TE lib.
-> childcnt: 2
* Port NOT useable for PBX (maybe there is already a PBX running?)
--------
Port 2: TE-mode BRI S/T interface line (for phone lines)
-> Protocol: DSS1 (Euro ISDN)
-> Layer 4 protocol 0x04000001 is detected, but not allowed for TE lib.
-> childcnt: 2
* Port NOT useable for PBX (maybe there is already a PBX running?)
--------
Port 3: NT-mode BRI S/T interface port (for phones)
-> Layer 2 protocol 0x02000002 is detected, but not allowed for NT lib.
* Port NOT useable for PBX (maybe there is already a PBX running?)
--------
Port 4: NT-mode BRI S/T interface port (for phones)
-> Layer 2 protocol 0x02000002 is detected, but not allowed for NT lib.
* Port NOT useable for PBX (maybe there is already a PBX running?)
--------
I do:
etc/misdn-init.conf
card=1,hfcpci
card=2,hfcpci
card=3,hfcpci
card=4,hfcpci
te_ptmp=1,2
nt_ptp=3,4
---
etc/misdn.conf
<mISDNconf>
<module poll="128" debug="0"
timer="no">hfcmulti</module>
<module debug="0"
options="0">mISDN_dsp</module>
<devnode user="asterisk" group="asterisk"
mode="660">mISDN</devnode>
<card type="hfcpci">
<port mode="te" link="ptmp">1</port>
</card>
<card type="hfcpci">
<port mode="te" link="ptmp">1</port>
</card>
<card type="hfcpci" dtmf="yes"
crystalclock="yes">
<port mode="nt" link="ptp">1</port>
</card>
<card type="hfcpci" dtmf="yes"
crystalclock="yes">
<port mode="nt" link="ptp">1</port>
</card>
</mISDNconf>
--
etc/asterisk/misdn.conf
;Tried with both config's no change
misdn_init=/etc/misdn-init.conf
;misdn_init=/etc/mISDN.conf
[trunks]
ports=1,2
context=from-trunk
msns=*
[NTports]
context=from-internal
ports=3,4
msns=*
-------------------------------------------------------
I am using Elastix 1.5 not updated
Any tips?
Where can I find documentation?
Thank you!
HB
