Displaying 6 results from an estimated 6 matches for "childcnt".
2007 Mar 14
1
beronet BN4S0
...000001 is detected, but
not allowed for TE lib" mean?):
best regards and thanks
t.
asterix asterisk # misdnportinfo
Port 1: TE-mode BRI S/T interface line (for phone lines)
-> Protocol: DSS1 (Euro ISDN)
-> Layer 4 protocol 0x04000001 is detected, but not allowed for TE lib.
-> childcnt: 2
* Port NOT useable for PBX (maybe there is already a PBX running?)
--------
Port 2: TE-mode BRI S/T interface line (for phone lines)
-> Protocol: DSS1 (Euro ISDN)
-> Layer 4 protocol 0x04000001 is detected, but not allowed for TE lib.
-> childcnt: 2
* Port NOT useable for PBX (may...
2007 Jul 27
1
chan_mISDN module does not load
...BRI card.
I installed misdn 1.1.3 with hfcmulti driver and
misdnuser 1.1.3.
I configured the card "correctly" as misdnportinfo
reports:
# misdnportinfo
Port 1: TE-mode BRI S/T interface line (for phone
lines)
-> Interface is Poin-To-Point.
-> Protocol: DSS1 (Euro ISDN)
-> childcnt: 2
--------
Port 2: TE-mode BRI S/T interface line (for phone
lines)
-> Interface is Poin-To-Point.
-> Protocol: DSS1 (Euro ISDN)
-> childcnt: 2
--------
Port 3: TE-mode BRI S/T interface line (for phone
lines)
-> Interface is Poin-To-Point.
-> Protocol: DSS1 (Euro ISDN)
->...
2009 Mar 12
2
BRI/ISDN, misdn.conf/misdn-init.conf, OpenVOX B100P and Etisalat in Dubai
Hi All,
We've got msidn configured:
Port 1: TE-mode BRI S/T interface line (for phone lines)
-> Protocol: DSS1 (Euro ISDN)
-> childcnt: 2
--------
mISDN_close: fid(3) isize(131072) inbuf(0x8fd5060) irp(0x8fd5060)
iend(0x8fd5060)
and running on Asterisk 1.4.21.2:
pbx*CLI> misdn show stacks
BEGIN STACK_LIST:
* Port 1 Type TE Prot. PMP L2Link UP L1Link:UP Blocked:0 Debug:0
but I'm not sure how to check our settings ar...
2007 May 08
0
Beronet card - issue?
...the red led on the card always blinking.
The card is connected with PBX. I post some conf:
[root@gateway ~]# misdnportinfo
Port 1: TE-mode BRI S/T interface line (for phone lines)
-> Protocol: DSS1 (Euro ISDN)
-> Layer 4 protocol 0x04000001 is detected, but not allowed for TE lib.
-> childcnt: 2
* Port NOT useable for PBX (maybe there is already a PBX running?)
--------
Port 2: TE-mode BRI S/T interface line (for phone lines)
-> Protocol: DSS1 (Euro ISDN)
-> childcnt: 2
--------
mISDN_close: fid(3) isize(131072) inbuf(0x9eff060) irp(0x9eff060)
iend(0x9eff060)
[root@gateway ~]...
2009 Sep 01
0
mISDN NT mode config setting
...p 1 23:09:24 2009 from 192.168.2.50
Welcome to Elastix
----------------------------------------------------
misdnportinfo
Port 1: TE-mode BRI S/T interface line (for phone lines)
-> Protocol: DSS1 (Euro ISDN)
-> Layer 4 protocol 0x04000001 is detected, but not allowed for TE lib.
-> childcnt: 2
* Port NOT useable for PBX (maybe there is already a PBX running?)
--------
Port 2: TE-mode BRI S/T interface line (for phone lines)
-> Protocol: DSS1 (Euro ISDN)
-> Layer 4 protocol 0x04000001 is detected, but not allowed for TE lib.
-> childcnt: 2
* Port NOT useable for PBX (may...
2008 Apr 28
0
misdn, no free channels, similar to FAQ one
...setup is done as detailed on wiki and FAQ.
* mISDN and miSDNusers are 1.1.7.2, unpacked, build and installed.
After installation and misdn-init, I have this:
aragorn:root/pts/1: # misdnportinfo
Port 1: TE-mode BRI S/T interface line (for phone lines)
-> Protocol: DSS1 (Euro ISDN)
-> childcnt: 2
--------
mISDN_close: fid(3) isize(131072) inbuf(0x9846060) irp(0x9846060)
iend(0x9846060)
/etc/asterisk/misdn.conf has this group definition:
[extern]
ports=1
context=misdn
msns=*
/etc/asterisk/extensions.conf has these contexts:
[default]
exten => 200,1,Dial(IAX2/duritji,,r)
exten =...