Hi, this is my 1st message, I'm writing to ask if anyone knows if a PCI32 card like the TDM400P (quad analog) or the B410P (quad BRI) is working on a PCI-X bus, at 100MHz or 133 MHz. I'm really stuck with this, since I found a partial "yes" on this mailing list but my supplier says "no"! Thanks, Marco
> this is my 1st message, I'm writing to ask if anyone knows if a PCI32 > card like the TDM400P (quad analog) or the B410P (quad BRI) is working > on a PCI-X bus, at 100MHz or 133 MHz. I'm really stuck with this, > since I found a partial "yes" on this mailing list but my supplier says > "no"!Marco, You should not have any issues using a PCI card in a PCI-X slot, as long as the card is a 3.3V PCI card. The cards that you mention above are 3.3v compatible and you should be able to use them. All of Digium's product line is available for 3.3v slots. Most are universal and can be used in 3.3v or 5v slots. The only exceptions are the dual and quad span T1/E1 digital cards. For those cards, there are 3.3v variants (TE410P and TE210P) and 5v variants (TE405P and TE410P). -- Michael Spiceland
Marco wrote:> Hi, > this is my 1st message, I'm writing to ask if anyone knows if a PCI32 > card like the TDM400P (quad analog) or the B410P (quad BRI) is working > on a PCI-X bus, at 100MHz or 133 MHz. I'm really stuck with this, since > I found a partial "yes" on this mailing list but my supplier says "no"! > Thanks, > > Marco >On a very similar note, I have a server that only has PCI-64bit 33MHz slots left (don't know if 5V or 3.3V). Can I place a TDM400P in there? (please no response telling me that there are better cards, I'm sure there are but there aren't any better card that I already have).