similar to: PCI32 and PCI-X compatibility

Hi all, I'm looking for a new system which will use the TE410P. Originally I was going to use a dual Athlon MP system, but my supplier tells me these are being phased out now, and so will be difficult to find replacement parts later. So, I am looking for suggestions of suitable motherboards with 3.3V PCI slots for the following CPU types (in order of my personal preference) AMD Opteron 1xx

Hi, I've been asked to find a server that is capable of running the Digium TE410P card. We usually get Dell PE servers and after a quick look I think the PE 1800 has the required slot: Six Total: 2 PCI Express (x8 lane & x4 lane); 2 x 64-bit/100MHz PCI-X; 1 x 32-bit/33MHz PCI (5v) and 1 x 64-bit/66MHz PCI Has anyone got this hardware, does it work with the card and asterisk? Thanks,

Why PCI 3.3V for E1/T1 card!? I can not use it because I can not find any motherboard with PCI 3.3 . Any sugestions!? Cristian VASILIU AccessNET International S.A. Software Programmer mail to :<cvasiliu@accessnet.ro> www:<http://cvasiliu.home.ro>

We have recently purchased a B410P Digium 4* ISDN-2 card with hardware EC. On the same server, I also have a regular Digium 4-channel PSTN-card (TDM410P ?), used to interface to some analog devices, a.o. 2 fax machines. For faxing, EC needs to be off (or so I understand from the archives). How can I switch EC off for an ISDN B-channel if a fax is coming in? Z.

Hello everyone. I have server with 2E1 PCI card, asterisk 1.4.35, dahdi 2.4.0, libpri 1.4.12-beta2. One PRI trunk looks to PSTN and take a clocksource from telco. Another trunk looks to PBX with DECT system. Some outgoing calls from asterisk to PSTN drops. The last message that exists before hanging up process is: DEBUG[28467] channel.c: Got a FRAME_CONTROL (8) frame on channel DAHDI/... This

I am planning to buy Dell 2650 server with dual Xeon processors. And I would like to buy two TE410P cards for PCI with 3,3v. This is on Dell site about PCI slots for Dell 2650 server: 3 PCI-X (1x64-bit/133MHz, and 2x64-bit/100MHz) Does that mean I will be able to buy two TE410P cards ? Or I need to buy two TE405P cards ? Thanks for help. bartek

http://www.mixdown.ca/~asterisk/ The card seems to be working fine. Don't expect warranty on it though. :-) Why? Because I wanted a quad-span T1 card which worked in the high-end systems I was intending it for, but that I could also keep a few in stock and if the system mainboard failed, pull the card an put it in a standard PC system. I didn't want to have to stock 3.3V and 5V

Can anybody tell me the difference between a TE410P and a TE405P? Is it JUST the 5v vs 3.3v pcis slot spec, or is there some thing else? </edg>

Hi all, I'm going to configure a middle asterisk installation. I'll use a TE210P to connect a T1 channel bank and a PRI E1 line. I'm thinking on using a SuperMicro P8SCT Mother Board that has a 1x 64-bit 133MHz PCI-X 3.3V. In TE210P documentation I've read: The TE210P is a 32-bit 33MHz card keyed for 3.3 volt operation. Can SuperMicro slot (that is a 133Mhz slot) be used

Hi, I just bought the E100P from digium. It has both keys: 3.3V and 5V, so it would fit both, in a 5V-PCI slot and in a 3.3V PCI slot. Is it true, that I can plug it without destroying it in an ordenary 5V PCI slot? Roger.

I am getting ready to purchase my first Digium card to start experimenting with Asterisk. Before I make my purchase, I wanted to make sure I'm not going to have issues with these cards (need to see what the specs are on my box, 5V or 3.3V PCI ). I will be using Asterisk @ Home, so will be Asterisk v1.0.9. I took a quick poke at the lists, and it appears several people have been having

I too had a server room fry and need to replace h/w. So what specific Dell servers did/do you deploy? Where is the link w/Digium/s Dell caveats? I'm using the Digium TDM400 card w/* > Date: Thu, 13 Apr 2006 19:19:13 -0500 (CDT) > From: Aaron Daniel <amdtech@shsu.edu> > Subject: Re: [Asterisk-Users] Digium cards, so disappointing ! > To: Asterisk Users Mailing List -

Hello, I would like to put 1 asterisk box in Country A and 1 asterisk box in Country B. Let's assume : - Asterisk box in country A = GWA - Asterisk box in country B = GWB - Calling party number (located in country A) = CgPNA - Called party number (located in country B) = CdPNB - Second Called party number (located in country B) = sCdPNB - PSTN in country A = PSTNA - PSTN in country B = PSTNB

Hi, Is anyone here using the SuperMicro SuperServer 6014P-8R with Asterisk? I'm especially interested if you've used it with a TE405P or TE410P. Cheers Tony -- Tony Mountifield Work: tony@softins.co.uk - http://www.softins.co.uk Play: tony@mountifield.org - http://tony.mountifield.org

Hello, I'm just starting out with asterisk and I'm playing around with the system. Currently I have a Digium TE210P connected to a PRI on the Asterisk server. I have a SIP soft phone on my laptop for testing that is working fine. When I try to place a call from my soft phone I get this from Asterisk: May 1 09:11:41 NOTICE[20098]: app_dial.c:1029 dial_exec_full: Unable to create

Hi all, I have to bought a PCI with 4 PRI but on digium site I saw that there a re two different kind (3,3V and 5v). What's the difference? Which one I have to buy for do not have any problem with this motherboard? (Gygabyte GA-8S661FXM-775). I checked on Gigabyte website but I don't find any kind of this value :-| Thanks all Giordano -------------- next part --------------

Hi, Can anyone suggest a good motherboard for the T/E410P cards ? Coz it doesn't get inserted in the the regular P4 motherboards due to PCI slot (32 bit) .... Any suggestions. Regards Azher --------------------------------- Do you Yahoo!? Yahoo! SiteBuilder - Free, easy-to-use web site design software -------------- next part -------------- An HTML attachment was scrubbed... URL:

hello list, i have a problem regarding the synchronisity (clock source) when using multiple cards. e.g. when having connected one PRI port of our TE410P to the telco, i need to have the analog card like the TDM400P or a B410P synchronous to the clock of our telco provider. otherwise faxing on the analog cards does not work or i get cracking noise or even hangups on my BRI lines, due to bit slips.

I'm having some trouble here - need some help! I've just bought a TE405p (32-bit 5V), but cannot get it working in a dell 6450. The dell has (from tech specs) "three peer PCI buses: two 64-bit buses and one 32-bit bus Expansion slots seven hot-pluggable PCI slots (two 64-bit/66 MHz, four 64-bit/33 MHz, and one 32-bit/33 MHz)" I cannot get the card working in any of the slots.

Hi all, Our asterisk PBX, randomly restarts all the channels of the E1 connection. It sends this message "There is no D-Channel, using channel 16 anyway".Then the asteisk recive (or it thinks it recives) yellow alarms at all the B-channels, after that it restart all the channels. When restarting the B-channels it cut all the conversations that is handling at that moment. Does anyone