Hi all, I have a problem with my beronet card with 2 isdn. I think
drivers and Asterisk are ok but the red led on the card always blinking.
The card is connected with PBX. I post some conf:
[root@gateway ~]# misdnportinfo
Port 1: TE-mode BRI S/T interface line (for phone lines)
-> Protocol: DSS1 (Euro ISDN)
-> Layer 4 protocol 0x04000001 is detected, but not allowed for TE lib.
-> childcnt: 2
* Port NOT useable for PBX (maybe there is already a PBX running?)
--------
Port 2: TE-mode BRI S/T interface line (for phone lines)
-> Protocol: DSS1 (Euro ISDN)
-> childcnt: 2
--------
mISDN_close: fid(3) isize(131072) inbuf(0x9eff060) irp(0x9eff060)
iend(0x9eff060)
[root@gateway ~]#
[root@gateway ~]# cat /etc/misdn-init.conf
card=1,0x4
te_ptmp=1,2
poll=127
dsp_poll=128
dsp_options=0
dtmfthreshold=100
debug=5
[root@gateway ~]# cat /etc/asterisk/misdn.conf
[general]
debug = 0
method=standard
bridging=no
stop_tone_after_first_digit=yes
append_digits2exten=yes
dynamic_crypt=no
crypt_prefix=**
crypt_keys=test,muh
[default]
context=misdn
language=it
musicclass=default
senddtmf=yes
far_alerting=no
allowed_bearers=all
nationalprefix=0
internationalprefix=00
rxgain=0
txgain=0
te_choose_channel=no
pmp_l1_check=no
reject_cause=16
need_more_infos=no
nttimeout=no
method=standard
dialplan=0
localdialplan=0
cpndialplan=0
early_bconnect=yes
incoming_early_audio=no
nodialtone=no
callgroup=1
pickupgroup=1
presentation=-1
screen=-1
echocancel=yes
jitterbuffer=4000
jitterbuffer_upper_threshold=0
hdlc=no
[isdn]
ports=1
context=from-pstn
msns=*
This is the first time that I configure this type of card.... Link of
some good docs is ok too. :)
Enrico.
--
Pasqualotto 'Pasqu' Enrico
enrico AT pasqualotto DOT org
web: http://www.pasqualotto.org
skype: epasqualotto
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/x-pkcs7-signature
Size: 3423 bytes
Desc: S/MIME Cryptographic Signature
Url :
http://lists.digium.com/pipermail/asterisk-users/attachments/20070508/9131ebde/smime.bin
