asterisk users - Jan 2007 - Problems with mISDN TE line

Hi list,

I've installed Asterisk 1.4.0 with newest mISDN 1.0.4 + mISDNuser 1.0.3
on Fedora Core 6.

I get many compilation error on mISDN. It wants to include linux/config.h
That I fixed by removing the #include line at every occurance. (Don't
know if that was a wise move, but it then compiled).

mISDNuser and asterisk compiled fine, and asterisk can find and use the
ISDN BRI port in nt_pmtp mode, but when I want to call out via the
te_pmtp port, then the following line is written in the log:

For incoming call:
Sat Jan 13 16:33:04 2007: P[ 1]  Extension can never match, so disconnecting

For outgoing call:
Sat Jan 13 16:41:18 2007: P[ 1]   --> we have already send Release_complete

and the line is "BUSY".

The phones on the NT line works fine, and SIP <-> mISDN (NT) calls has
no problems.

All comment lines has been removed to keep mail size reasonable.

/etc/misdn-init.conf:
card=1,0x4,dtmf
te_ptmp=1,2
nt_ptmp=3,4
option=1,master_clock
poll=128
dsp_poll=128
dsp_options=0
dtmfthreshold=100
debug=0

misdn.conf:
[general]
misdn_init=/etc/misdn-init.conf
debug=1
ntdebugflags=0
ntdebugfile=/var/log/misdn-nt.log
bridging=yes
stop_tone_after_first_digit=yes
append_digits2exten=yes
dynamic_crypt=no
crypt_prefix=**
crypt_keys=test,muh
[default]
context=default
language=en
musicclass=default
senddtmf=yes
far_alerting=no
allowed_bearers=all
nationalprefixinternationalprefix=00
rxgain=0
txgain=0
te_choose_channel=no
pmp_l1_check=yes
reject_cause=16
need_more_infos=no
nttimeout=no
method=standard
localdialplan=0
cpndialplan=0
early_bconnect=yes
incoming_early_audio=no
always_immediate=no
nodialtone=no
immediate=no
hold_allowed=yes
callgroup=1
pickupgroup=1
presentation=-1
screen=-1
echocancel=yes
echocancelwhenbridged=yes
echotraining=yes
jitterbuffer=4000
jitterbuffer_upper_threshold=0
hdlc=yes
max_incoming=-1
max_outgoing=-1
[outside]
ports=1
context=outside
msns=*
[inside]
ports=3
context=inside
msns=*
overlapdial=yes


-- 
Med venlig hilsen / Best regards,

Henrik Woffinden

I've been through this once and, IIRC, I'd say your [outside]
  context in the dialplan does not have an extension matching
  the incoming msn.

  Suggestion:

  - Recheck your extensions.conf [outside] context


  Otherwise:

  - Increase misdn debug to level 3
    (something like "misdn set debug 3" at the CLI)

  - Then share the misdn.log + [outside] context dialplan
    with the list so that further feedback can be provided

  Cheers + Good luck,
--
  Ex Vito