Hi,
These days I run into something quite odd.
I have an A@H that was modified to meet our requirements.
We have a completely funtional DISA which we use pretty much all the
time.
I works flawlessly with incomming SIP calls from several providers,
IAX calls from FWD and with ZAP.
Recently we came out with a situation where it doesn't work... with
a SPA3000 PSTN Line.
You can call, navigate de IVR, log in into our app, and then when
you go to DISA, and DISA plays the dialtone... whatever you dial is not
recognized...
This was REALLY odd... so I made a network capture with Ethereal,
and... the SPA actually STOPS sending the RTP Events after the second
dialtone...
To verify this, I created an IVR which played the dialtone, and
verified that it was true.... no RTP DTMF events (RFC2833) are sent after
the SPA listens the second dialtone.
I just reviewed the 87 pages PDF of the SPA3000... and didn't find
anything about such "feature".
Now I am going to try to figure out if it has something to do with
the tones recognition of the SPA.
I the meanwhile I had to write a little DISA-like app, based on
something I found on this forum, without the dialtone.
Did anyone find out anything about this issue before?
REGARDS!!!
Alchaemist
I have this exact same issue with the SPA3000, I'm assuming it must be a SPA3000 bug? Dave Hawkes Alchaemist wrote:> Hi, > > These days I run into something quite odd. > I have an A@H that was modified to meet our requirements. > We have a completely funtional DISA which we use pretty much all the > time. > I works flawlessly with incomming SIP calls from several providers, > IAX calls from FWD and with ZAP. > > Recently we came out with a situation where it doesn't work... with > a SPA3000 PSTN Line. > You can call, navigate de IVR, log in into our app, and then when > you go to DISA, and DISA plays the dialtone... whatever you dial is not > recognized... > > This was REALLY odd... so I made a network capture with Ethereal, > and... the SPA actually STOPS sending the RTP Events after the second > dialtone... > > To verify this, I created an IVR which played the dialtone, and > verified that it was true.... no RTP DTMF events (RFC2833) are sent after > the SPA listens the second dialtone. > > I just reviewed the 87 pages PDF of the SPA3000... and didn't find > anything about such "feature". > Now I am going to try to figure out if it has something to do with > the tones recognition of the SPA. > I the meanwhile I had to write a little DISA-like app, based on > something I found on this forum, without the dialtone. > > Did anyone find out anything about this issue before? > > REGARDS!!! > Alchaemist > > > > > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > Asterisk-Users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >
Just tried it on mine, worked fine:
Cellphone Call -> POTS -> SPA3000 -> Asterisk -> DISA ->
Telasip
As an FYI, I have my SPA3000 setup with INFO for the DTMF. When I originally
installed it, I couldn't get the DTMF digits to work coming in using AUTO,
which is why I have it using INFO (needs to be set on both the SPA and in
Asterisk).
I'm running the SPA300 with Software Version: 2.0.13(GWg), Hardware
Version 2.0.1(4e16).
philippe
From: Dave Hawkes <daveh@cadlink.com>
To: asterisk-users@lists.digium.com
Date: Wed, 17 May 2006 13:44:43 -0400
Subject: [Asterisk-Users] Re: DISA & SPA3000 issues
I have this exact same issue with the SPA3000, I'm assuming it must be a
SPA3000 bug?
Dave Hawkes
Alchaemist wrote:> Hi,
>
> These days I run into something quite odd.
> I have an A@H that was modified to meet our requirements.
> We have a completely funtional DISA which we use pretty much all the
> time.
> I works flawlessly with incomming SIP calls from several providers,
> IAX calls from FWD and with ZAP.
>
> Recently we came out with a situation where it doesn't work... with
> a SPA3000 PSTN Line.
> You can call, navigate de IVR, log in into our app, and then when
> you go to DISA, and DISA plays the dialtone... whatever you dial is not
> recognized...
>
> This was REALLY odd... so I made a network capture with Ethereal,
> and... the SPA actually STOPS sending the RTP Events after the second
> dialtone...
>
> To verify this, I created an IVR which played the dialtone, and
> verified that it was true.... no RTP DTMF events (RFC2833) are sent after
> the SPA listens the second dialtone.
>
> I just reviewed the 87 pages PDF of the SPA3000... and didn't find
> anything about such "feature".
> Now I am going to try to figure out if it has something to do with
> the tones recognition of the SPA.
> I the meanwhile I had to write a little DISA-like app, based on
> something I found on this forum, without the dialtone.
>
> Did anyone find out anything about this issue before?
>
> REGARDS!!!
> Alchaemist
>
>
>
>
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
---------------------------------
Feel free to call! Free PC-to-PC calls. Low rates on PC-to-Phone. Get Yahoo!
Messenger with Voice
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20060517/631bf5f3/attachment.htm