search for: spa

Hi I have a big problems on my Asterisk systems : I have one Asterisk Server with static IP (no nat) and 6 Linksys SPA941. All SPA are after a router with NAT: * SPA-1 and SPA-2 are on the same network, we have a pat 5060 => SPA-1 and 5061=> SPA-2 on the internet router * SPA-3, we have a pat 5062 => SPA-3 * SPA-4, we have a pat 5063 => SPA-4 * SPA-5,...

I am located in the UK, and I am using Sipura spa-2000 adapters to connect analog phones to a voip network. The network connects to the PSTN as well via the Sipura spa-3000 adapter. I would like to provide surge protection for the spa-2000 and the spa-3000 adapters. 1. For spa-2000, fxs port: What is the maximum tip-to-ring voltage before da...

I just bough a Sipura SPA-2100 to use with Asterisk. When I use the analog handset plugged into the SPA-2100, the person on the other end can hardly hear me. I check the SPA-2100 setup and their is no mic/spk gain control. Is this a problem with the SPA-2100 or with Asterisk? Any way for asterisk to compensate for the...

Greetings, What is the recommended settings for using SPA-3000's FXO port for dialing out to PSTN in regard of the DTMF? The voip lan contains SPA-2100 and SPA-3000, with all fxs/fxo ports registered to the Asterisk box with unique username/passwords. The inbound PSTN DTMF works excellently, e.g. people calling from PSTN into the * box are able t...

...m a newbie and this is the only way I know to get an example on here) abund1 <- c(150, 300, 0, 360, 150, 300, 0, 240, 150, 0, 60, 0, 150, 0, 540, 0, 0, 300, 0, 240, 300, 300, 0, 360, 300, 0, 600, 0) abund2 <- matrix(data=abund1, nrow=4, ncol=7) colnames(abund2) <- c("spA", "spB", "spC", "spD", "spa", "spF", "spG") rownames(abund2)<-c("site1", "site2", "site3", "site4") ##### > abund2 spA spB spC spD spa spF spG site1 150 150 150 150 0 300 300 si...

Hello all, I have a new Sipura SPA-2000 that I am trying to configure beind a NAT. The SPA is able to register to the asterisk server without a problem and the SPA can make calls to other extension that are not behind a NAT. However, when I try to call the SPA from another extension, the extension connected to the SPA rings, the u...

Hi, I have a Linksys SPA 3102 using as ATA. The call routing is : Phone -> PSTN -> SPA 3102 -> SIP Proxy -> Asterisk The problem I am having is that when the phone hangs up, SPA 3102 can't detect it and relay the CANCEL message. Is this problem with my SPA 3102 config or it just works like that by defaul...

...ear the other end.. i've checked my logs and havent found anything relevant.. but yet again maybe you could as i'm a newbie.. Registered SIP '101' at 192.168.75.192 port 22162 -- Saved useragent "X-Lite release 1014k stamp 47051" for peer 101 -- Executing [101 at spa:1] Dial("SIP/100-0967ad88", "SIP/101|15") in new stack -- Called 101 -- SIP/101-09683690 is ringing -- SIP/101-09683690 answered SIP/100-0967ad88 -- Native bridging SIP/100-0967ad88 and SIP/101-09683690 == Spawn extension (spa, 101, 1) exited non-zero on 'S...

In my hunt to track down my echo issues, I tried disabling all echo cancellation, suppression, adaption, on my SPA-2000 (Advanced section of the config, under Line 1/2). Then calling from one local extension to another. (SPA-2000 Line1, to Line2 on the same device) I was pretty shocked with the results, the echo was HORRIBLE! I even tried 3 different analog phones. Now, once I turned the echo cancellation ba...

My SPA-3000 finally arrived and I'm trying to get the FXO port on it to work as if it was a X100P card as far as Asterisk is concerned. I have Asterisk dialing out over the SPA-3000 FXO port no problem. The issue I'm having problems with is having the SPA-3000 automatically forward all incoming...

...Uberblock: magic = 0000000000bab10c version = 22 txg = 464265 guid_sum = 6102932533008274672 timestamp = 1289468487 UTC = Thu Nov 11 10:41:27 2010 All DDTs are empty Metaslabs: vdev 0 metaslabs 101 offset spacemap free --------------- ------------------- --------------- ------------- metaslab 0 offset 0 spacemap 26 free 0 segments 0 maxsize 0 freepct 0% metaslab 1 offset...

I've been trying to get fax reception to work using an SPA-2000 to ring the fax machine or modem that's taking fax calls. I was curious if anyone else had tried something similar, and if so, had any luck getting it to work reliably. I've been able to get it to work, but it isn't reliable. (Pages/lines of black dots result more frequently th...

Hello all, I have an ISDN termination box (TR1) that converts ISDN(Bri) to 2 normal analogue lines. The same number is assigned to these lines. These lines are connected to 2 spa3k registered to my asterisk box. When calls arrive, TR1 try to pass call to the first spa. If spa not takes the call immediately then try to pass to the other spa. The only configuration I found works is to put the parameter 'PSTN Answer Delay' to 0 in each spa. The problem is Call CID....

I hooked up a SPA-1001 with asterisk yesterday and all works well except the phone doesn't ring. The phone I'm using has a LCD display so I can see the call come in. (with caller id info) I can answer and complete the call but it's just not ringing. The phone rings if pluged into a POTS line so it'...

Hello, I am very new to asterisk and voip in general and so far have managed to get the FXO card and a few sip phones working fine. My question is where does the Sipura SPA 2000 come in the picture? Can it be used as an extension (i.e FXS) ? Or is it to be used as a line (i.e FXO)? Or it can be used as both? My understanding is that its just like another ATA186. Is that true? I guess what I want to know is that if I can use the SPA 2000 as a FXO. And if I can, are t...

Hello All! I am in the process of assembling an asterisk-based phone system for my office - using SPA-3000s to connect the network to the PSTN. I am wondering if anybody else can get (or has already seen) the same behaviour out of their 3000. The short version: Send multiple Calls to the SPA's FXO port at the same time it is re-registering with Asterisk. SPA HTTP Configuration: PS...

Hello I'm about to order a GrandStream GXP-2000 and a Linksys SPA-921 I'd like to have some user feedback about how those phones perform, and whether their LCD screen displays both the caller ID name and number (The GrandStream BT-100 only displays numbers, which isn't very helpful). Thank you.

I heard Sipura had really awesome documentation on the SPA-2000 and SPA-3000, but you have to email them for it. When I did, they said I had to get it from a reseller. It's been a while since I bought my units, I don't even remember where or who they were bought from. Can somebody email me the documentation for these devices? I'm quite interest...

Hello. Has anyone run into problems accessing voicemail with the Sipura SPA-2002's? Our SPA-2000's work fine (registers fine, able to make and receive calls properly & also able to access voicemail). We've configured the 2002's exactly the same way. However, with the SPA-2002 we're unable to access the voicemail system (though it does registe...

This post is simply documenting a spouse-friendly way of using the spa-3000 as both a fxs and fxo port for basic soho environments in the US, allowing asterisk to participate as needed/wanted. All home phones are connected _only_ to the spa-3000 fxs port. The incoming home pstn line is connected _only_ to the spa-3000 fxo port. Defined Line 1 (fxs) to register wit...