Hi,
I have just setup a DISA setup whereby people can dial in, authenticate, are
given a dialtone and can then call out.
Everything works however there is a 10 second delay after the user enters
the number and presses #, until the system does anything.
Here is the relevant section from my extensions.conf:
[dialtone]
exten => s,1,Authenticate(1234)
exten => s,2,DISA(no-password|dialtone_outgoing)
[dialtone_outgoing]
exten => _01.,1,Dial(${OUTGOING}/44${EXTEN:1},30,L(60000:30000:10000))
exten => _07.,1,Playback(pbx-invalid)
The call gets dropped into the dialtone context fine.
The authentication works fine
The user is given a dialtone fine.
If the user dials a 01 number, the call goes out.
If the user dials an 07 number, then the message plays back.
HOWEVER there is a 10 second delay between the dialing (followed by #) and
the system doing anything.
Watching the log with verbosity set to 16, no messages occur in the
10seconds.
Any ideas; do I have the dialplan correct?
Thanks
C
_____
From: asterisk-users-bounces@lists.digium.com
[mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of C. Tomlinson
Sent: 27 February 2005 17:10
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: [Asterisk-Users] DISA and a long delay; ideas?
Hi,
I have just setup a DISA setup whereby people can dial in, authenticate, are
given a dialtone and can then call out.
Everything works however there is a 10 second delay after the user enters
the number and presses #, until the system does anything.
Here is the relevant section from my extensions.conf:
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20050227/47db9440/attachment.htm