asterisk users - May 2005 - Re: Asterisk-Users Digest, Vol 10, Issue 234

Hello All
 
I'm using asterisk 1.1.X and MFCR2 lib version 0.03pre2. when i call to E1
(connected with asterisk), chan_unicall don't detected event incoming call
and show error.
 
error messages:

*CLI> Warning, flexibel rate not heavily tested!
Rx CAS bits 0x9  [   10000/  0/   0]
Line unblocked
    -- R2 Channel 4 unblocked
Rx CAS bits 0x9  [   10000/  0/   0]
Line unblocked
    -- R2 Channel 2 unblocked
Rx CAS bits 0x9  [   10000/  0/   0]
Line unblocked
    -- R2 Channel 13 unblocked
Rx CAS bits 0x1  [       1/  0/   0]
Tx CAS bits 0xD  [       1/  0/   0]
Rx CAS bits 0x9  [   20000/101/   0]
Tx CAS bits 0xD  [   20000/101/   0]
Schedule
Rx CAS bits 0x9  [   10000/  0/   0]
Line unblocked
    -- R2 Channel 5 unblocked
Rx CAS bits 0x9  [   10000/  0/   0]
Line unblocked
    -- R2 Channel 11 unblocked

Asterisk Ready.
*CLI> Rx CAS bits 0x9  [   10000/  0/   0]
Line unblocked
    -- R2 Channel 10 unblocked
Rx CAS bits 0x9  [   10000/  0/   0]
Line unblocked
    -- R2 Channel 2 unblocked
Rx CAS bits 0x1  [   10000/  0/   0]
Line unblocked and seized
Unschedule 1
Tx CAS bits 0xD  [   10000/  0/   0]
    -- R2 Channel 8 unblocked
Rx CAS bits 0x1  [   10000/  0/   0]
Line unblocked and seized
Unschedule 1
Tx CAS bits 0xD  [   10000/  0/   0]
    -- R2 Channel 9 unblocked
Rx CAS bits 0x1  [   10000/  0/   0]
Line unblocked and seized
Unschedule 1
Tx CAS bits 0xD  [   10000/  0/   0]
    -- R2 Channel 6 unblocked
Rx CAS bits 0x1  [   10000/  0/   0]
Line unblocked and seized
Unschedule 1
Tx CAS bits 0xD  [   10000/  0/   0]
    -- R2 Channel 15 unblocked
Rx CAS bits 0x9  [   20000/101/   0]
Tx CAS bits 0xD  [   20000/101/   0]
Schedule
Rx CAS bits 0x9  [   20000/101/   0]
Tx CAS bits 0xD  [   20000/101/   0]
Schedule
Rx CAS bits 0x9  [   20000/101/   0]
Tx CAS bits 0xD  [   20000/101/   0]
Schedule
Rx CAS bits 0x9  [   20000/101/   0]
Tx CAS bits 0xD  [   20000/101/   0]
Schedule
Rx CAS bits 0x1  [       1/  0/   0]
Tx CAS bits 0xD  [       1/  0/   0]
Rx CAS bits 0x9  [   20000/101/   0]
Tx CAS bits 0xD  [   20000/101/   0]
Schedule 
 
my setting zaptel.conf
# Zaptel Configuration File
span=1,0,0,cas,hdb3,crc4
cas=1-15:1111
cas=17-31:1111
dchan=16
alaw=1-31
loadzone=fr
defaultzone=fr
 
my setting zapata.conf
; Zapata telephony interface
; Configuration file
[trunkgroups]
trunkgroup => 1,16
spanmap => 1,1,1
[channels]
language=en
context=from-pstn
switchtype=national
nsf=none
pridialplan=national
prilocaldialplan=national
overlapdial=yes
priindication = outofband
signalling=pri_cpe
rxwink=300  ; Atlas seems to use long (250ms) winks
;usedistinctiveringdetection=yes
usecallerid=yes
cidsignalling=bell
cidstart=ring
hidecallerid=no
callwaiting=yes
;restrictcid=no
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
callreturn=yes
;mailbox=1234
echocancel=yes
echocancelwhenbridged=yes
;echotraining=yes
;echotraining=800
relaxdtmf=yes
rxgain=0.0
txgain=0.0
group=1
callgroup=1
pickupgroup=1
immediate=no
;callerid=2564286000
;amaflags=default
;accountcode=lss0101
;adsi=yes
;busydetect=yes
;busycount=4
;hanguponpolarityswitch
;callprogress=yes
;progzone=us
;pulsedial=yes
;faxdetect=both
;faxdetect=incoming
;faxdetect=outgoing
;faxdetect=no
musiconhold=default
;idledial=6999
;idleext=6999@dialout
;minunused=2
;minidle=1
;jitterbuffers=4
;cadence=125,125,2000,-4000
;cadence=250,250,500,1000,250,250,500,-4000
;cadence=125,125,125,125,125,-4000
;cadence=1000,500,2500,-5000
;crv => 1:16

my setting unicall.conf
; $Id: unicall.conf.sample,v 1.1 2005/05/28 11:17:02 steveu Exp $
[channels]
language=en
context=default
usecallerid=yes
hidecallerid=no
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
;relaxdtmf=yes
rxgain=0.0
txgain=0.0
group=1
callgroup=1
pickupgroup=1
immediate=no
protocolclass=mfcr2
protocolvariant=vn,20,7
protocolend=co
group = 1
channel => 1-15
channel => 17-31

i'm using sangoma card, firmware V.25 and driver beta8-g.2.3.3
 
 
Please help me
 
Thanks
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20050531/8393b974/attachment.htm