asterisk users - Dec 2004 - chan_capi - avm card does not work

Hi,

I added a Fritz!PCI card to my asterisk system which is running on fc2
!.
I installed the avm modules (fcpci) and when i try an capiinit and a
capiinfo then everything seems to be OK (you can see capiinfo and lsmod
at the end of the text) !.
I installed the asterisk chan_capi module and when i start asterisk and
enter the command capi info on the command line i get back:

 *CLI> capi info
Contr1: 2 B channels total, 2 B channels free.

But if i try to call the line i cannot see anything happening - even if
i put on debugging (with capi debug)

Can someone tell me where i can start to look - why it doesnt work ? ( i
am no on this issue since several days and i am out of ideas).

Thanks


capiinfo:
Number of Controllers : 1
Controller 1:
Manufacturer: AVM GmbH
CAPI Version: 2.0
Manufacturer Version: 3.101-02  (49.18)
Serial Number: 1000001
BChannels: 2
Global Options: 0x00000039
   internal controller supported
   DTMF supported
   Supplementary Services supported
   channel allocation supported (leased lines)
B1 protocols support: 0x4000011f
   64 kbit/s with HDLC framing
   64 kbit/s bit-transparent operation
   V.110 asynconous operation with start/stop byte framing
   V.110 synconous operation with HDLC framing
   T.30 modem for fax group 3
   Modem asyncronous operation with start/stop byte framing
B2 protocols support: 0x00000b1b
   ISO 7776 (X.75 SLP)
   Transparent
   LAPD with Q.921 for D channel X.25 (SAPI 16)
   T.30 for fax group 3
   ISO 7776 (X.75 SLP) with V.42bis compression
   V.120 asyncronous mode
   V.120 bit-transparent mode
B3 protocols support: 0x800000bf
   Transparent
   T.90NL, T.70NL, T.90
   ISO 8208 (X.25 DTE-DTE)
   X.25 DCE
   T.30 for fax group 3
   T.30 for fax group 3 with extensions
   Modem

  0100
  0200
  39000000
  1f010040
  1b0b0000
  bf000080
  00000000 00000000 00000000 00000000 00000000 00000000
  01000001 00020000 00000000 00000000 00000000

Supplementary services support: 0x000003ff
   Hold / Retrieve
   Terminal Portability
   ECT
   3PTY
   Call Forwarding
   Call Deflection
   MCID
   CCBS


lsmod:
Module                  Size  Used by
fcpci                 500632  1
c4                     20317  0
b1pci                  10445  0
b1dma                  17261  1 b1pci
b1                     25549  3 c4,b1pci,b1dma
capi                   17281  4
kernelcapi             44385  6 fcpci,c4,b1pci,b1dma,b1,capi
slhc                    7105  1 ppp_generic
capifs                  5961  2 capi

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20041217/6f151c2a/attachment.htm

Johannes Hollerer wrote:
> Can someone tell me where i can start to look - why it doesnt work ? ( i 
> am no on this issue since several days and i am out of ideas).
Have you defined /etc/asterisk/capi.conf?

Mine looks like this, phone numbers changed, however:

;
; CAPI config
;
;
[general]
nationalprefix=0
internationalprefix=00
rxgain=0.5
txgain=0.5

[interfaces]

msn=201234567 		; this is your area code (without the 0 to be
			; used in outbound numbers
incomingmsn=201234567	; this is a comma separated list of inbound 					; 
numbers to accept
controller=1		; how many fritz cards
softdtmf=1
accountcodecontext=home
echosquelch=1
echocancel=yes
echotail=64
callgroup=1
;deflect=12345678
devices=2		; how many B channles


There is a sample capi.conf file supplied with the capi drivers. You can 
also use a * on incomingmsn to accept all MSN numbers. I have some set 
as fax lines however so I don't mentioned them here as I want Asterisk 
to ignore them and Capi4Hylafax to accept them.

Hope this helps.

cw