search for: fcpci

...tly Asterisk related, but I'm trying to get an AVM Fritz! card to work with Asterisk on a Fedora Core 3 box. I've grabbed the official AVM Fritz CAPI driver from the AVM website and compiled against the current kernel. However, as soon as I modprobe it I get: CAPI Subsystem Rev 1.1.2.8 fcpci: module license 'Proprietary' taints kernel. fcpci: AVM FRITZ!Card PCI driver, revision 0.6.2 fcpci: (fcpci built on Jan 24 2005 at 13:51:46) ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 ACPI: PCI interrupt 0000:00:09.0[A] -> GSI 11 (level, low) -> IRQ 11 fcpci: AVM FRITZ!Card PC...

HI all, Has anyone succesfully installed an AVM Fritz! card on Fedora 7 using the drivers at ATrpms recently? http://atrpms.net/dist/f7/fcpci/ I tried with a clean F7 build on my EPIA 5000 yesterday, after modifying /etc/capi.conf (removing the coment # in front of fcpci line) I received the following error when executing 'capiinit' - FATAL: Error inserting fcpci (/lib/modules/2.6.22.4-65.fc7/updates/drivers/isdn/fritz/fcpci.ko)...

Hi, I successfully installed 2 avm card in my asterisk box but I'm unable to make call. My capi.conf is: msn=0721111,07211115 incomingmsn=* controller=1,2 softdtmf=1 context=default echocancel=yes callgroup=1 devices=2,2 my capi info : Contr1: 2 B channels total, 2 B channels free. Contr2: 2 B channels total, 2 B channels free. my extensions.conf : exten =>

Hi Folks, I have to setup a new server with a fritz-pci-ISDN-card inside. For it the fcpci-Packages from atrpm-repo is needed. Trying to install this package on a machine with the newest CentOS5-Plus Kernel I get an error message Missing Dependency: /boot/vmlinuz-2.6.18-8.1.14.el5 is needed by package fcpci-kmdl-2.6.18-8.1.14.el5 Okay -I have a vmlinuz-2.6.18-8.1.14.el5.centos.plus....

Hi Everyone, Long time reader, first time poster. FINALLY got my First AVM Fritz Card up and running under Centos 3.4 Installed the second....modified the drivers etc as per the instructions found at the wiki System boots Modprobe capi all good modprobe fcpci all good modprobe f2pci the kernel then goes into Panic If Modprobe f2pci before fcpci the kernel still goes into panic. Config as follows CentOS 3.4 Kernel 2.4.21-27.0.2.EL fcpci - fcpci-suse8.2-03.11.02 chan_capi-0.3.5 _____________________________ David Phelan Blue Ridge Systems P...

...many many other sites found via google over the last 16 hours) after modifying the makefile & defs.h, # make Throws up a whole bunch or errors ending with.. make[1]: *** [main.o] Error 1 make[1]: Leaving directory `/usr/src/fritz/src.drv' make: *** [drv] Error 2 it doesn't compile a fcpci.o for this kernel.. There are 2 other fcpci.o files (fcpci1.o fcpci2.o), but if I try to insmod them, I get an error like.. ./fcpci1.o: kernel-module version mismatch ./fcpci1.o was compiled for kernel version 2.4.20-4GB while this kernel is version 2.4.20-8. Where am I going wr...

Hi list, i'm keen to move to Asterisk 1.6, so really need to update my system which is running Mandrake 9.2 although it has been solid for years, fo Fedora 8. I have a Fritz! card for ISDN BRI, I have installed the drivers/kernel drivers from ATrpms (http://dl.atrpms.net/all/fcpci-03.11.07-14.fc8.i386.rpm and http://dl.atrpms.net/all/fcpci-kmdl-2.6.23.14-115.fc8PAE-03.11.07-14.fc8.i686.rpm) and isdn4k-utils. I 'modprobe capi' and 'modprobe fcpci' which appear to work fine, as I have no error messages and 'dmesg' shows: capifs: Rev 1.1.2.3 capi20: Re...

I tried that but it still doesn't work... I think I don't have the correct approach. Have I to install any ISDN drivers (=modules ?) BEFORE dealing with CAPI ? If yes, why shouldn't I use the hisax drivers (which are kernel ones) instead of fcpci drivers (which doesn't seems to work, by the way...) And finally, how is it possible to link the two modules together? As you can see, I am drowning in these difficulties and a help would be very welcomed! Cheers!

So I've got a PBX running with one Fritz card with the fcpci module and that works fine, but add another one and... kersplat... Kernel Panic. It boots fine with two cards, but panics as soon as the first fcpci.ko module is 'modprobe'd - I don't even get as far as modprobing the second. Any ideas on what's going on? Should I just back-up to...

Hi all, I'm new to asterisk and not too knowledgeable on ISDN, so please be gentle :) I have a dual-channel Eicon Diehl Diva card in a Debian Woody box with kernel 2.4.27, connecting to a Telstra (Australia) Onramp Home Highway ISDN line. I'm pretty certain the card and line both work since they've been used in this machine for PPP before this (but with an older kernel with DoV

Hi again! > I have excellent success with the tiny "fcpci" and chan_capi, which is > also working great with capi4hylafax. See > net-dialup/fcpci-0.1-r1 in gentoo (should not be difficult to use this > on other distros, but I have never done so). Do not confuse this with > the "fritzcapi"! I managed to install fcpci and it s...

...Using /lib/modules/2.4.20/kernel/drivers/isdn/avmb1/capiutil.o Using /lib/modules/2.4.20/kernel/drivers/isdn/avmb1/kernelcapi.o Using /lib/modules/2.4.20/kernel/drivers/isdn/avmb1/capifs.o Using /lib/modules/2.4.20/kernel/drivers/isdn/avmb1/capi.o Using /lib/modules/2.4.20/kernel/drivers/isdn/avmb1/fcpci.o Warning: loading fcpci will taint the kernel: non-GPL license - Proprietary See http://www.tux.org/lkml/#export-tainted for information about tainted modules Using /lib/modules/2.4.20/kernel/drivers/isdn/avmb1/f2pci.o Warning: loading f2pci will taint the kernel: non-GPL license - Proprietary...

...s from stuart hirsts email of Jun 28: -> Thanks for your info but I think I have it working at last. Below are the steps I took which might help others. 1) Download the PCI AVM drivers from ftp://ftp.avm.de/cardware 2) Download the Chan_capi from http://www.junghanns.net/asterisk/ 3) tar -xvzf fcpci-suse8.0-03.09.10.tar.gz which creates a directory called "fritz" 4) edit the file fritz/src.drv/tools.c and put "//" in front of the following lines to exclude them : #include <linux/string.h> #include <linux/vmalloc.h> #include <linux/kernel.h> #include <l...

We have tried Asterisk 1.0.9 on FC4 and have never been able to get CAPI (with Fritz card, fcpci) to work properly. Apart from that Asterisk works fine in switching internal calls. But it's useless if we can't make outgoing calls on our ISDN line. We are considering abandoning FC4 for Debian or SuSe. What is the general concensus on the best Linux to run Asterisk with CAPI? /Why Tea...

Hello, I am using a system with an AVM ISDN PCI card (fcpci) and asterisk with chan_capi-cm-0.6. The hardware is connected to a Siemens Hipath 3550 PBX. As a BRI connection has 2 channels and allows 2 simultaneous calls, numbers/MSNs 6391 and 6392 were for provisioned for each channel. The system is working (partly, read on), the trick is the correct ca...

If I do that, the modprobe doesn't find any module called fcpci and is looking for any module called hisax_fcpcipnp as it's the one install for the isdn fritz card. # capiinit modprobe: Can't locate module fcpci ERROR: failed to load driver fcpci Maybe, I should reinstall the fritz card drivers itselves? (however, I don't think so...)

...0-8 Asterisk: latest CVS head Hi all, I try to compile the latest chan_capi, but it won't work. I also tried the patch that is arround there from frank sautter and I have installed the asterisk header files. Asterisk is working very good :) and the Fritz AVM pc Card is running. capiinit: 1 fcpci running fritz-pci A1 3.11-02 0xbc00 5 lsmod: fcpci 587744 1 capi 20896 0 kernelcapi 33792 2 [fcpci capi] capiutil 24864 0 [kernelcapi] capifs 5420 1 [capi] Here is a little output when I try to...

Someone have info about install an AVM fritz into FC3 ? I'm getting problems with kernelcapi, after succesfully installed the fcpci support. Thanks -- Adri? Vidal adriavidal@gmail.com Mail is better with 1Gmail

Hi, I added a Fritz!PCI card to my asterisk system which is running on fc2 !. I installed the avm modules (fcpci) and when i try an capiinit and a capiinfo then everything seems to be OK (you can see capiinfo and lsmod at the end of the text) !. I installed the asterisk chan_capi module and when i start asterisk and enter the command capi info on the command line i get back: *CLI> capi info Contr1: 2 B c...

...working configs back but still no change. I reinstalled asterisk from the cvs and even rebootet my linux box (kernel 2.4.27) still no change. This stuff is now bugging me for 5 hours and i am slowly going nuts. I am using an installation with several different sip-fones, zaptel+zaprtc as well as fcpci+capi on a teles isdn card. Any ideas where to look for? thx, Arnd